I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.

I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.  It never dropped or anything 

Try here:
iPod touch: Hardware troubleshooting
You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
Try a restore to factory settings/new iPod if yuhave not doe so so far.
Are you  using the headphones that came with the iPod? Are you inserting the plug fully
Have you tried another set of headphones in the iPod?
The speaker is not that loud.

Similar Messages

  • I have just recieved a brand new ipod touch 8GB, it wont turn on and it wont either charge or recognise connection through ITunes. I have tried the hold down home and the power button together but no luck. Its absolutely dead, any ideas please ????

    I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar    

  • I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?

    I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?
    [Music files are still there, and I can play them on my computer directly from the iPod [just one track at a time] but not in the usual way, through headphones.]
    On the Summary page of iTunes for the iPod, it shows 50-plus gigabytes of "Other" content and no music, which was not previously the case.  I assume this is related to the problem.
    I can bring up individual tracks on the iPod and see cover art, but cannot play the music.

    iCloud is free, iTunes match is $25 a year.
    I had the same problem and when I went to Settings I had 0 songs, even though they were obviously still there since I only had 15GB free on my 64GB device.
    I decided to do a complete reset/restore of my 4th gen iPod Touch, Bad move! I've been messing with it for hours, and it simply won't restore--it keeps hanging on a black screen with an Apple logo and a progress bar at about 10%, sometimes it goes completely blank and tries again, with the same result. (I've posted my question/plea for help here: https://discussions.apple.com/message/19735862 )
    I'm ready to bang my head against the wall! I can put the device in recovery mode, connect to iTunes on my computer, and get it back to the setup screen, but when I go through the process again and try to do an iCloud backup I get the same reset/restore loop.
    I could start from scratch, but I really, really, really don't want to go through all of my hundreds of apps, reinstall them one by one, etc. etc. etc.
    I thought that once I started using iCloud, I didn't need to sync with iTunes anymore--guess I was wrong.

  • Brand new ipod touch connected, device recognized, but nothing happens?

    I bought a brand new iPod touch 2nd gen two days ago and as I was very excited to plug it into my computer, sadly, nothing happened. iTunes recognizes the device and can be seen under Devices, but NOTHING happens and there are no other functions to click on at all. No set up, just a blank white screen, and yet, the iTouch screen still says to connect it to iTunes which it already is....
    I have reinstalled iTunes, restarted my computer many times, updated it to the latest iTunes version, and still this problem persists. Can anyone help me out please!
    Thanks in advance.

    I would start with these:
    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1495

  • HT201442 Just bought a brand new ipod touch a month ago and went in to iTunes. There was an update for me so I downloaded it to my ipod and then it went into recovery mode. Tried to restore it in itunes but was told this device isn't eligible.  Help!!

    Just bought a new ipod touch a month ago.  Went into itunes to burn music and had an update to download which I did. Then I get a message that my ipod has gone into recovery mode. It's locked up with a black screen with iTunes logo and picture of a plugin on the screen. Tried to restore it as recommended but itunes said this device isn't eligible for the requested build. Error codes 3194 and 17. This is very frustrating considering the cost of the ipod and how new it is. Now what do I do?  Buy another one? Can anybody fix these types of things? Is this a common occurance or am I just unlucky?

    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
         Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I just opened my brand new iPod touch 4th generation, and it's frozen with green, vertical lines. Does it have to be replaced?

    It's Christmas morning and my parents bought me a new iPod Touch 4th Generation 4G 32GB. I started charging it, 5mins later I walked back into my room and there I saw it - frozen, white screen with light green, vertical lines. It's brand new, and I just opened it about 5mins prior. I never dropped it, it never touched water. My mum bought it at the nearby Target. I opened it, in it's case and everything. So I have no clue what happened. I really hope the workers at Target didn't just sell me a broken iPod. This really stinks, and I really hope somebody can help me. I feel terrible for my mum having spent so much on it. So please, someone help me out.

    Hello planb77 / PANIDORA, I'm having the same problem. I'm using my iPhone 5S or my iPad Mini cable and wall charger to do it (both originals) , and the iPod Shuffle does not charge at all, doesn't matter if is direct on the wall or trough my Macbook Air.I 've restored it once, but nothing has changed. What else can I do?

  • Just got my brand new ipod touch please help

    I just go my 3rd generation ipod touch and when I try to turn it on there is a usb and a itunes cd with a music note on it please help.

    Welcome to the discussions.
    It sounds like [this is the screen|http://support.apple.com/kb/TS1275] you are seeing. I think that will help guide you through what to do.

  • Just registered a brand new iPod Touch for my daughter (created new user name and password) but when she went to App Store and typed in aforementioned Apple ID and password it tells us these are incorrect when I know they are correct. What's up?

    The title says it all.
    Please help.
    Sam

    - Go to Settings>iTunes and App Store and sign out and sign back in
    - Reset the password and try again. After  resetting the PW sing out and sign back in
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • I just bought a brand new Ipod touch but when I went to update it, a screen keeps popping up saying that the apple mobile device (recovery mode) was unable to install to my ipod and the ipod will keeps showing me the connect to itunes, what can I do?

    i really need help with that

    Maybe here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    Otherwise com back with the exact wording of your error message. The one you gave does not seem correct.

  • Brand new ipod touch 5th gen 64gb problems with first power on

    I have just received a brand new ipod touch 5th gen 64 gb from amazon. After reading the instructions i tried to power it on but nothing happened.
    It was suggested on here to try the recovery start but again, nothing happened.
    I then plugged the device in to a wall socket charger to see if the battery is flat,but the apple logo comes on for about 15 seconds then goes off again. If I hold down the home button while the apple logo is off, after a while the ipod goes into recovery start up, but as soon as i unplug it from the wall socket adaptor it turns off.
    It will not do anything plugged into the usb soccket of my laptop.
    Any ideas or will I have to return this to amazon?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. You can go to an Apple store even if yo purchased it from Amazon
    Apple Retail Store - Genius Bar                                     

  • Brand new Ipod Touch can't been seen in Itunes

    Hi there,
    I hope someone can help as this is driving me mad!
    I have just received a brand new Ipod TOuch but when I connect it to my PC per the installation instructions I get the following message "Itunes could not connect to the Iphone because an invalid response was received from the device"
    I have uninstalled all Apple products from my PC and reinstalled most up to-date version of Itunes.
    I have tried different USB ports.
    I have stopped and re-started the "Apple mobile device" and "Ipod Service" services.
    I have done all of the above in various combinations and re-started my PC numerous times.
    None of this makes any difference.
    The Ipod does not appear in my "My Computer" but when go into device manager on "My Computer" it is listed there so it would appear that my PC can see the Ipod.
    I tried it on another laptop and a brand new installation of Itunes sees the Ipod fine, no problems.
    However I have previously used an Ipod Nano on this PC and this I think is what is causing the problems.
    I have listed below the content of the Itunes Diagnostics file in the hope that that will help. I see that it does mention the Ipod Nano previously used.
    iTunes Serial Number <Edited by: Host>
    Current user is an administrator.
    The current local date and time is 2009-06-07 10:05:26.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Radeon 9550 / X1050 Series
    ATI Radeon 9550 / X1050 Series Secondary
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.2.0.23 is currently running.
    iTunesHelper 8.2.0.23 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
    VIA USB Enhanced Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod nano running firmware version 1.3.1
    Serial Number: <Edited by: Host>
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Can anyone help me please?
    Many thanks.

    Okay, I had this same issue as soon as I updated to iTune 8.2. Someone gave me an idea about renaming a certain file, which I thought worked for a little bit. The issue came back and I am back in the same boat!
    The bad news is to find a version of iTune 8.1. Uninstall everything and then reinstall iTune 8.1. This has worked for some; however, some have even had to restore their iPod Touchs!
    I am giving in and doing this tonight. I waited as long as I could for the fix. My wife has an iPhone and we have NOT upgraded her iTunes to 8.2 because I have read iPhone users having a similar issue. If her iPhone died, then that would be ultimate deal breaker.

  • HT1212 my daughter has a brand new ipod touch - never used - she entered a passcode then immediately forgot it and now she has tried to enter one too many times and ipod is locked for 1 hour - she has never synced with itunes HELP

    my daughter has a brand new ipod touch - latest one - she started to input a passcode then didn't finish the process then turned off ipod. she turned it back on and it is asking for a passcode - she doesn't remember what she typed. Ipod is now disabled for one hour. Can we override the disable. How do we reset passcode when we don't klnow the original. It has never been synced to Itunes. I am completely lost.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.

  • Brand new iPod touch, only synced once. Now showing the pairing record missing notification. Not recognised by iTunes OR computer. Have tried literally everything including reinstalling iTunes, rebooting, etc. Please help.

    As I've said, brand new iPod touch. I only synced it Friday night, put some music on it. This morning tried to connect to iTunes and got a message saying the pairing record was missing? Computer isn't recognising it either, but it charges off the computer just fine. Have tried everything including changing USB port, rebooting, uninstalling and reinstalling iTunes twice, literally everything I've found on forums. Anyone help me out here? I'm so annoyed I could nearly cry.

    Anyone able to help with this?

  • Brand new ipod touch suddenly stopped working. please help!

    I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped. I even connected it back to my mac book but nothing happened. please help! i've only had it for two days!

    That sounds like a mechanical problem.  You might want to insert and remove the headphone plug several times and see if it fixed the issue.  If it does not, call Apple.  800-275-2273 in the U.S.A. and I think Canada.

  • Brand new iPod Touch is not being recognized by my computer

    Hello,
    I just bought a brand new iPod Touch. I had iTunes installed since this is a replacement to a very old iPod. When I plugged my new iPod Touch to start the very first sync, iTunes crashed and started giving me a Windows 7 error (999). After many frustrated attempts to reinstall iTunes (and a few blue screens in between), I followed a recommendation in one of the postings to delete all the Apple programs in a certain order. It worked and I was able to reinstall iTunes. The problem now? My USB, which at one point kept asking for the software to install the iPod, won´t recognized it anymore. Period. I´ve rebooted several times and whenever I plug my iPod in any of the four USB ports, absoluletely nothing happens, as if nothing had ever been plugged in. I tested the USB with my blackberry and it recognized it. Please help!! Thanks!

    Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...

Maybe you are looking for

  • JS CS3 How to make guides

    I just gave a try to creating guides in CS3 with this sophisticated snippet: var lyr = app.activeDocument.layers.add(); var gd = lyr.pathItems.add() gd.setEntirePath(Array(Array(100,0), Array(100,100))); gd.guides = true; and was hit by two surprises

  • Posting Date to be changed?

    Hi SAP experts, Is it possible to have a FI document (not yet paid) (status Overdue only) to have the posting date changed? This document type was created after the IDOC processing and the date posted is February 1st. This should have been Jan 31st i

  • What is wrong with my codes?

    import java.util.*; import javax.management.*; import weblogic.management.*; import weblogic.management.security.authentication.*; import weblogic.management.security.authentication.AuthenticationProviderMBean; import weblogic.management.security.aut

  • How to set queue names dynamically for MQ Adapter - SAP XI

    Hi Friends   I have a scenario where I should send a message to multiple queues ( more like broadcasting ) using a single communication channel of MQ Adapter. The scenario is like this 1. If the message content contains value '111' then message shoul

  • Where can I find this Lenovo wallpaper?

    Link to picture Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB, Network Card: Intel(R) WiFi Link 1000 BGN,