I just recently upgraded my itunes and now i am having problems turning on my ipod
So i recently upgraded my itunes, and my ipod was connected to it. Now my ipod wont turn on, and i just want it to return back to before the upgrade
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Needing help authorizing my computer to install my purchases, I tried the >store,> authorise this computer.
When I try to install a window pops up saying I need to authorise itHello dizzy bizzy,
Thank you for providing the details of the issue you are experiencing with purchases from the iTunes Store. I recommend following the steps in the following article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with iTunes, specifically, I can't get music files to go over to iTunes. Spin Doctor gives me a message indicating that iTunes isn't working properly.
I am using iTunes 9.1.1(12) and Spin Doctor 3.1.1.304t. I have investigated upgrading the Spin Doctor but I think too much time has passed and the version available are too far advanced.
Any ideas? Can I undo the iTunes upgrade? Is there a website that I can go to to get the upgrade for my Spin Doctor?
Thanks.
MaryIf your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
Then you can run the latest iTunes to sync your iPad running iOS 6
You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping. -
Just installed latest upgrade to iTunes and now it will not open
Just installed the latest upgrade to itunes and now it will not open. I have followed all of the troubleshooting steps i could find online and still nothing. I have even restored my computer three times to 3 different restore points and that had no effect. Please help.
Hi Jeff,
see for your problem:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
it worked for me.
Grtz -
I recently upgraded to ios7 and now my PC is not recognizing my iphone
I am having several problems. I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone. 1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes." How did it get locked and how do I unlock it without losing my data? What do they mean by passcode? I don't have a 4-number code to get into my iphone activated. In fact, I've never had a passcode.
2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone. In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder).
3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com). But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
Why is this happening? It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return. But now essentially my iphone is not recognized when connected to my computer and this is very frustrating. I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.No problem!
This will make it easy for you:
http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/ -
I downloaded the most recent update to iTunes, and now all my songs are missing. My library is completely empty.
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I recently upgraded to ML and now I find that CS5.5 programs crash unexpectedly all the time. Is anyone else having this issue and what's the best way to resolve this. Help.
You might check and see if there are any Console entries about what happened when you attempted to launch a CS 5.5 app.
Adobe links its apps with the particular volume on which it is running, and altho' I can't recall specifics, I know in the past I have had to reset Adobe's settings after OS upgrade. I do recall that it's a fairly easy procedure; just don't exactly recall what it is.
BTW, CS 4 runs on Mountain Lion for me. -
My iTunes won't recognize my iPod 3GS!!! HELP! I had recently updated my iTunes and now upon plugging in my iPod iTunes comes up with a error message. Leaving me unable to sync anything! HELP!
What is the exact error message you are receiving?
B-rock -
HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up
I recently upgrade my OS and now my MacBook Pro will not boot up
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?
The iPhoto library should be in your user folder/Pictures unless it was moved.
-
I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.
You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
Hope that helps -
I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this? Thanks in advance!
Have you installed something called "CleanMyMac?"
-
I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I get it to re-start?
Hi denise mfrompalatine,
If your iPhone won't turn on, try the steps in the resource below:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Hope that helps ...
- Judy -
i have an iphone 4 just updated my iTunes and now i'm having troubles to sync my iPhone with iTunes... can anyone help me plz?
You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.
Maybe you are looking for
-
Before today I could print anything just fine to my HP CP1025NW. Today, however, I can no longer print PDF's at all from either Adobe Acrobat Pro or Preview. Sometime's it says connecting to printer for a while and then just says error and sometime I
-
Discoverer 3.1.36.06 bug?
Dicoverer 3.1.36.06 Bug? Hello, I've been having trouble trying to setting privileges to User IDs in Discoverer 3.1.36.06 Administration Edition. This seems to be a very basic problem that I'm sure lots of people have already detected it. The problem
-
Select list not setting a return value
I have defined a select list based on a named LOV. With the default values for the SOURCE section I do not seem to be getting a value returned, as indicated in the following debug output: 0.05: parse query 0.05: binding: ":P1_SALESMANAGER_SHOW"="P1_S
-
Dear all. I need your help. I need to customize new workflow task that need to be displayed and executable at UWL level. When I go to System Administrator area, there are many "System Alias" that have connector type "webflow connector". How to know w
-
Getting "Non supported character set: oracle-character-set-178" exception
Hi, I am using Struts,spring,hibernate and database oracle 9i. There are 2 modules developed by 2 units, both uses different versions of Spring and hibernate.As well one uses stored procedures and one uses prepared statements. I am integrating both u