I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

Similar Messages

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

  • I replaced my hard drive and then tried to reinstall adobe creative suite and it tells me that the serial number is invalid, what do i need to do?

    i replaced my hard drive and then tried to reinstall adobe creative suite and it tells me that the serial number is invalid, what do i need to do?

    You will need to contact Adobe directly:
    Contact Customer Care
    What version?

  • I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
    See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
    tt2

  • XI have just replaced my hard drive and uploaded my backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

    I have just replaced my hard drive (more memory) and uploaded my Time Machine backup. Now iPhoto won't launch or reset and relaunch. Suggestions?

    Well without no information to work with, try reinstall.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • I have just replaced my hard drive and downloaded Yosemite and now I can't access my photos from my external hard drive

    II've just replaced my internal hard drive for my desktop because it failed And installed Yosemite.  I had an external hard drive but it had Mavericks and now I can't access my old iPhoto.  What can I do?

    backup your iPhoto and install iPhoto 9.6 - if you had iPhoto '08 or earlier then you need to download and run the iPhoto library before launch iPhoto 9.6
    If that does not help then you actually need to tell us information and details - like version of iPhoto. exactly why you can not access your photos and any message you got
    LN

  • I just replaced my hard drive and want to reinstall Lion. Was only able to use my original disks and upgrade to 10.5.8 so far.

    How can I re-download and install Lion?
    2007 iMac hard drive failed yesterday. Replaced drive with a 1Tb from apple and used original disks and software update to get 10.5.8 Leopard running. Updated QT to 7.5.5 so can launch and log in to iTunes. I had purchased Lion previously but can't seem to access the Mac App store to re-download and install my purchased copy.
    Thanks
    MJ

    Upgrade to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Once you get this far you can look to reinstall Lion from the Purchases page in the App Store or by purchasing a Lion download:
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • JUST replaced my hard drive and still hearing a clicking noise?

    So, I'd been hearing an occasional clicking noise (more like a hard, sharp "tap") from my hard drive. It started about a week ago. Two days ago I got apple to replace it and brought it home last night. There's a problem, however - this new one is clicking too - the noise is slightly more muffled than before, but still relatively loud. By an "occasional" click, I mean once an hour or so, more often if I'm running intensive programs but sometimes just if I click a link on the internet.
    Is this a defective drive, or is it something else? It clicked about 10 minutes after startup, when I was playing video in Final Cut Express. I also had Firefox open. I have 223GB/500GB on the hard drive (data was transferred over from the old one).
    I'm positive it isn't the data itself, because that couldn't cause a physical discrepancy in the HD. Or could it?
    Really hoping I don't have to send this one back to apple too. The laptop itself is barely three months old.

    Heads park/unpark, HD spins up, spins down, as platter/s need to be accessed, whether read/write. I'm not able to predict exactly when that would occur (make someone else can explain that further). Is it possible the replacement drive is faulty? Certainly. Is this the same brand/model as the original HD?

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • I replaced my hard drive and am installing the OS 10.5.6 that i got from Apple. It is stuck with 7 minutes remaining. Help! this is the first time I've ever done this.

    I just replaced my hard drive in my 13" Macbook. I got the OS install disk from Apple but it's stuck with 7 minutes remaining. What do I do now? I let it check the disk before the install.

    Did you properly prep your new drive first?
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.  If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.
    I think you should shutdown the installer then erase the drive per the above and start again.

  • I just replaced my hard drive on my imac and now when i turn the computer on the fan is running and slowly gets louder and louder. how do i turn it off?

    I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
    thanks.

    If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.

  • My hard drive on my Mac Book Pro failed last week.  I replaced the hard drive today and had to use my snow leopard disc that came with the computer to get teh thing going.  I was running Mt Lion which I had purchased last year on the old dr

    The hard drive on my Mac Book Pro failed last week.  I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer.  I had Mt. Lion on the old drive that I had purchased last year but no boot disc made.  I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either.  How do I get something to run the software that I had on the old drive?

    Unfortunately I lost my life and am trying to rebuild.  Isn't the technical era great.
    Backup, backup, backup
    As a minimum, use 3-2-1 (or even more)
    3 copies of your data (original copy counts as 1)
    2 different backup utilities/storage formats (protects from bugs in the software)
    1 copy off-site (protects against theft, fire, and natural disaster)
    More backup copies are even better.
    Backup disks are cheap compared to the lost of personal data that does not exist anywhere else.

  • How do I retrieve my purchased songs and playlists from my iTunes account? I have just had to replace my hard drive and have lost pretty much everything!

    How do I retrieve my purchased songs and playlists from my iTunes account? I have just had to replace my hard drive and have lost pretty much everything!

    You can redownload your iTunes store purchases, but you'll need a backup to recover the playlists.

  • I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
    Or, you can upgrade to Lion or Mountain Lion:
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Apple store just replaced my hard drive which had Mountain Lion on it, now App store wants me to pay for it??

    I had a problem with my hard drive, it just wouldn't start up. I got the Macbook Pro with Mountain Lion already installed and no disc with it.
    They replaced my hard drive and told me to run all updates before i install Mountain Lion again. I assumed that it would let me install it for free.
    The app store is trying to charge me for it?
    What do i do?

    alexrovers wrote:
    nooo iv only had it nearly a year, i got it from Apple
    How is it possible? ML came out just a couple of weeks ago...

Maybe you are looking for

  • Goods issue for plant maintenance order

    Goods issue with ref to plant maintenance order( Componenets of the order) is not possible in transaction code MIGO. Error message " MIGO is not possible for the refurbishment order". Goods issue for the same order can be posted with transaction MB!A

  • BPM: collect payload problem

    hi all..... i created BPM pattern collect payload. BPM steps are... in loop receive-contaner1(append the recmsg to recmsg_multi)-container2(increment the counter)-loopend, transfermation-send And the container elements are..... counter.....simple typ

  • Black background/white writing

    Hi there, Just wondered if anyone knows of a phone that has a black background with white writing on all parts of the phone? Most phones at the moment have the facility to change it but the texts normally come up with white background/black writing.

  • Is Adobe Creative Suite 5 Web Premium compatible with Retina MacBooks?

    I'd heard that there is a pixelation issue that was resolved in later versions but I can't find those versions to purchase anywhere.  Thanks for any help.

  • How to make a custom object function the same as the Competitor and Partner

    Would like to use a custom object to function the same way the Competitor and Partner objects work in CRM. I have not be able to accomplish this. Do you know if it is possible? Can the specialized functionality of the account relationships fields and