I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it. it then tells me to unplug the ipad and plug it in again.l I do that and get the same message.
I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it. it then tells me to unplug the ipad and plug it in again.l I do that and get the same message.
have you tried a different usb port? for the **** of it try restarting the computer as well
Similar Messages
-
Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I have just had a system update. Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash. I have installed it from the site but still no luck? any help would be much appreciated Cheers Dave
Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
WebKit built-in PDF -
I just switched from a PC to a Mac, and now when I connect my ipod, the computer doesnt recognize it. Any suggestions?
You probably need to move your ENTIRE iTunes FOLDER from your PC to your MAC...
You can do this via an External Drive...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html -
I have use three free apple Id and now when I am creating a fourth time it's saying that it is the maximum. What must I do to create a new apple id. Plz help
Sorry, no way around this limitation on an iOS device. To use a new iCloud account, you need to create such on a computer first, then setup the account on your iOS device.
-
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run my Itnues from this external and now my library is gone. Luckily I have it saved somewhere else, which is not a problem, but I won't be able to write to this HD for right now. I can't see an option to give those permission back.
cptjuanjvarona wrote:
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?...
Unless what you have to transfer is enormous, skip the external HD altogether and use a USB flash drive; you can get them with capacities to 128GB. Format the flash drive as FAT32 or ExFAT as LowLuster suggests so it can be read and written to on both PC's and your Mac. -
Upgraded to itunes 11.4 and now when i connect my iphone 4s..itunes crash!!!!
upgraded to itunes 11.4 and now when i connect my iphone 4s..itunes crash!!!!when the iPhone is disconnected iTunes is working properly....
please help me!!!Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
earlier i was bored and decided to open my iPod Nano 6th Generation to see if i could fix the broken sleep button, i think when i was removing the battery i might have beat it up a little, and idk if i did anything wrong to the logic board, now when i connect it it says, "USB Device Not Recognized, One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it" and it gets hot when i charge it and the music doesnt play even if i use the headphones with controls on them, it was working fine earlier:(
They are pretty much designed to fail after about a year so you will have to buy a replacement. I would suggest an earlier model or to take your business elsewhere. I have gone through my fourth and final ipod nano 6th generation.
-
I changed my laptops OS and now when I try to sync my music from phone to the new itunes it is saying Remove and replace. What do I do to keep the music and playlists from myphone?
Did you try to set it up again as new device?
How to back up your data and set up as a new device -
I downloaded new version of Itunes to my ipad2 and now I can't find sync button. There is nothing down the left side to pick device, etc. The screen is completely blank. Help
if your using windows, try this.
-
I am trying to update a 4s. The update did not work for some reason. Now I need to restore the iPhone. When I connect the usb to the computer and phone it says I need to restore. So, I click to restore. It starts extracting the software. But I am continually getting the same error message that it cannot complete for unknown error. I have been working on this for 5 and a half hours. I'm tired, mu husband needs his phone and apple support is a joke and of course I can't find any answers anywhere. Please help!
Hi MB2751,
As an iPhone user myself, I know it must be very much a problem to have the phone out of service because of an error such as you are seeing. Let's see if we can get you back up and running.
I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L -
It aso charges when I connect it to my computer, so the cable is fine.
Actually I just tried doing it again and it seems to stop syncing when I states to sync photos to my ipod
-
Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??
Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I just updated iTunes, and now when I connect my phone iTunes crashes.
I just updated iTunes to the latest version, and then when I connected my iPhone I received an error message saying iTunes had encountered a problem and DEP closed it. I tried uninstalling and reinstalling and nothing has helped so far. I am in the process of uninstalling everything and installing an older version but I searched on google and found others have had this exact problem. Is there a solution to this problem yet??
Hi,
same problem was here to with Windows 7 home premium 64-bit. I Had also problems with my multimedia-keys on the razer tarantula. They won't be recognized.
After having to much trouble with 10.4 is was using my systembackup to restore to 10.3. I must do this because after reinstalling 10.3 iTunes told me that the database is incompatibe.
No everything is working as normal. Hoping Apple will fix these things and also the new Safara 5.1 that will destroy the iTunes Store in 10.4 (Only blank white screen).
Manfred
Maybe you are looking for
-
Flickr: abbasovv's Photostream Please help Create a query that will display the total number of employees and, of that total, the number of employees hired in 1995, 1996, 1997, and 1998. Create appropriate column headings.
-
I have a number that looks something like this: 0.552 I would like to round it up to a one decimal number like this: 0.6 How can I do this? Thanks a lot!
-
Re assignment of material from inspection plan group
Dear Experts, I have an issue, we got a material which has multiple groups assigned to it. How to remove the materials assignment from the inspection plan group? Since the group contains more than 1000 line items, it is very laborious to search every
-
Import invoice for multi payment
Hi , I am having import invoice with reference to one PO , case is that i want to payee for 4 paryee 1. Material supllier 2. Carrier on CIF 3.Custom 4.Local transport . How can make payment for all party with reference to one import PO RB
-
Automatical creation of activities with attached document
Hello, I want to create activities with an attached document, but that should work automatically. I just have the bp-numbers for creating the new activities , and for attaching the documents, the documentname is equal the bp-number. Now I should now