I just Synced My iPhone 6 which had close to 2000 photos to a new computer (windows PC) and synced with iTunes.Now all my previous photos have been deleted which were there on my phone. Please suggest a way to recover those Photos . Thanks
I just Synced My iPhone 6 which had close to 2000 photos to a new computer (windows PC) and synced with iTunes.Now all my previous photos have been deleted which were there on my phone. Please suggest a way to recover those Photos . Thanks
P.S -I have not taken any backup of those photos. So please suggest any software or any other method.
If those photos were part of the camera roll, they were part of the backup as well and you can restore from the latest backup you made on the old computer. After that transfer the photos to the new PC, follow this article: iOS: Importing personal photos and videos from iOS devices to your computer
Then sync again to the new one, which will erase the phone again.
You can also try to copy the backup folder from the old computer to the new one and see if the old backups get recognized, check this article to find the location on your PC:
Create and delete iPhone, iPad, and iPod touch backups in iTunes
If the photos were not taken with the phone, your data is gone, photos you sync from iTunes to the phone are not included in the backup.
Similar Messages
-
Upon the return of a viruse stricken PC and re-downloading itunes. I noticed my playlists have been deleted. I however still have the playlists on my touch. Is it possible to sync my playlists back to my PC?
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
-
please help i have an ipod touch downloaded several audio books for it. backed up ipod and synced with itunes now the ipod has no audio books on it and they are in itunes but i can not get them back on to the ipod. apples systems are incredibly awkward. any other system allows for mp3's etc to be drag and drop not this long winded and what appears to be a complete waste of time. you buy things and once synced you loose it and cant put it back
Are audiobooks still configured to sync to your iPod Touch via the iPod's Books configuration tab in iTunes? To check, plug your iPod in and select it from under the Devices section in the left hand pane of iTunes. This will bring you to the Summary tab. Locate the Books tap along the top and select it. Here you can configure how and what audiobooks sync to your device.
Or if you want to manually drag and drop audiobooks onto your iPod, you'll have to enable the device for manual management. See here for more details.
Managing content manually on iPhone, iPad, and iPod
B-rock -
I am trying to install CS 5.5 on a newer computer and every time I go through setup the serial number comes back good (green check mark, etc.) but then when I proceed with install, I am told to "please restart computer." No error number just "please restart." After restarting 5 or 6 times I realized there must be a deeper issue. I first made a basic mistake (forgot to deactivate the serial#) so I went back on to the original device and, interestingly, when I re-installed InD CS5.5 on the old computer, there was no incident. It then proceeded to function normally and opened just fine, I deactivated the serial#, and went back to the new computer. After installing and trying again, I got the same message "please restart computer."
This was a license that allowed for multiple installs and I have put this program on a Win7 (pro) laptop before using the same serial number and had no issue. Now I am on an Asus Desktop running Win7 (home) and and am having this please restart problem. Could it be an OS issue? Any ideas of what to try?
Thank you all, I hope someone can help.
TommyI think you need to clean this machine before trying again, so run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3), then run MSconfig and turn off all non-essential startup programs before you try to install again.
Also, be sure javascript is enabled. From the Start menu choose Run, then in the command field type regsvr32 jscript.dll and press Enter. You should get a confirmation. -
How do i get the music from my ipod to my new computer without earse and syncing it?
ok so i cant seem to get my ipod to sync the music already on it to a new computer with earsing and syncing all of the music i have on my ipod.
How would I be able to transfer the music from the old computer to the new one.
-
aI paid a small fortune to have a very big Music Library and all of my songs are gone? How do i get them back? There has to be some way to have over 2000 + songs put back into my own Library how do i do that?
What exactly did your friend do ? Did you or he take a backup of your iTunes library before updating your computer ? Have you checked to see if your music is still on your computer ? By default your iTunes library is stored under :
Windows XP: \Documents and Settings\username\My Documents\My Music\
Windows Vista: \Users\username\Music\iTunes
Windows 7 and Windows 8: \Users\username\My Music\iTunes
If it's there then you can add it to your iTunes library via File > Add To Library.
If not then do you have a copy of your library on a backup ? If you do then use File > Add To Library to add it back.
If you haven't got a backup then you might, depending upon what country that you are in and if the music is still in your country's store, be able to redownload your iTunes purchases via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage. -
I've looked in program files but I do not see itunes anywhere. This is my first time having Windows 8.
I have it now that I've installed itunes again. Having some trouble trying to import my music library from external hard drive now. I only see "add file to library" but it won't allow me to add folders. I have numerous folders in my music folder on external hard drive. I was able to add all of them when to itunes in another windows computer when itunes was in a previous version. Now I see no way to add folders.
-
I updated the phone, and now, it won't charge through the wall charger, or through connecting to my PC. It doesn't even launch itunes or register it has connected. But the phone still palys music through my docking station. HELP!?
Hey guy;
I have the same problem and I do anything you can imagine. If you leave your phone about two or three days and after that plug in it your phone will be power on but your problem doesn't fix. I tried to restore as a new phone, reset all my settings and also I contacted Apple Support but I couldn't fix it. I think that it would be a software issue because it occurred right after iOS 6.1.3 update. It look likes that we have only two choice. First choice is waiting until Apple release next iOS update and check it in our phones, and the other choice is visiting an Apple retail store to diagnostic our phones for hardware issue. -
When I open some of my albums it looks like theres a haze over the page and I can't click on anything to change it. New songs aren't going into the same album they are going on iTunes individually. I thought when I downloaded iTunes on this new computer everything would be the same as the old computer I didn't think everything would change. I also have missing albums.
Hi DebbieLC!
I have an article for you that can help you troubleshoot this issue a little further. We have an article that explains what to do if you have no content in your iTunes after updating, and it can be found here:
No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I have just Realized that my calendar entries for December have been deleted. Is there anyway of retrieving them?
Settings>Mail, Contacts and Calendars>Sync>All Evens
-
I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download. There is not enough available local storage to download these items. You can manage your local device storage usage in Settings."
How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone? Why is it telling me there is not enough local space?Hi RileyAvaCadenRiver,
If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
Apple: iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden -
I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !
iOS: Unable to update or restore
Are you sure your friend didn't jailbreak it?
If so, save yourself a lot of time and trouble - throw it in the trash. -
I have just moved to Spain and out in a Spanish sim into my Irish bought iPhone 4. It says 'invalid sim' and 'no service'. The phone is not locked to any provider. I have been told that its a handset issue. Please advise.
1). Are you positive the phone is not locked? Where did you buy it? Did you get it unlocked from your original carrier? Only Apple sells unlocked phones in most countries.
2). Did you try with a diffrent SIM. MAybe the one you have is defective.
3). Does the Spnaish carrier you are using support the iPhone? Who told you it is a handset issue? -
I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?
Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore -
Can anybody please suggest the way i can get all the indexes on a cache
Can anybody please suggest the way i can get all the indexes on a cache?
Hi,
If you want to just see what there is at the moment, the StorageManager mbean IndexInfo attribute shows the toString() representation of the extractor of each index.
If you want to get it programmatically, you can get hold of it by sending an entry-processor to a key, then casting the entry to BinaryEntry, and calling BinaryEntry.getBackingMapContext().getIndexMap() to get the same Map<ValueExtractor,MapIndex> of indexes which the index aware filters get.
Best regards,
Rob
Maybe you are looking for
-
Crystal Report Installation File
Hi All, My client has SAP B1 2004A PL32 installed and i am looking for a crystal reporter installation file. can any one help me on this please..... If anyone has this file please help... Regards Satish
-
Creation of Purchase Requsition in MRP
Hi, In our existing process Purchase requisitions are created for certain materials after MRP is run. We require that the PurReq should be created with a specific Pur Req document. Where this setting is done which determines that PurReq is created wi
-
Any clue whats going on with time machine?
Of course I found all kinds of info about not to use seagate for time machine AFTER I bought the NAs110 blackArmor, but since I now own it, I need to try and use it. Time machine seems to work fine with the device as long as the computer is active.
-
Displaying Double 2.0E-4 as 0.0002
Hi people, I know its a very basic question but could anyone of you please help me with this. I have a double value 0.0002 stored in the database and I want to display as it is in Java. But somehow this value is displayed as 2.0E-4 (scientific form)
-
Hi Gurus, I have a below requirement. Appreciate if anyone can help. Suppose if we do Assignment Change/New Hire/Termination etc functions through SSHR, then initially it stores temporary on hr_api_transactions,hr_api_transaction_steps,hr_api_transac