I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?
I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?
I Did my usual software updates and it downloaded n asked me to restart so I did, and now it's not starting up
Similar Messages
-
I just updated my macbook pro and now every time i go to youtube it tells me I have to download the new version of adobe flash player so i do and it still wont let me play it ..
Assuming Allan's advice is not correct, and you do run the installer, I think I've heard of that problem and it involves removing the old Flash plug-ins, then install the new version. I don't use it so I don't know what they are called, but will be the /Library/Internet Plug-ins folder.
You can go here and enable HTML5 in YouTube so you don't have to use Flash: http://www.youtube.com/html5
Most(?) of the content is HTML5, but you may run into videos where you still need Flash. -
So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help
You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default. -
! started to update my system and was told to restart. I did. it has now been about 6 hours and all i see is an apple and a rotating circle. what is happening?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
i just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?
Welcome to Apple Communities
http://www.apple.com/support/mac/app-store/contact -
I just updated my MacBook Pro to 10.7.5 and got a message that the AppleUSBEthernetHost.kext was improperly installed and cannot be used. How to I find and install this extension?
Open the AppleScript Editor in the /Applications/Utilities/ folder, copy and paste the entire following line into it, and press the Run button:
do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
If it doesn’t work, throw that item away and then reinstall iTunes.
(114264) -
I just bought a macbook pro and asks me the password, says it has expired and I accept that I do?
I just bought a macbook pro and asks me the password, says it has expired what I do?
marsrover25 wrote:
I recently purchased a macbook pro and qualified for the free Mountain Lion update. Now that I've received the very long content code from Apple, where do I go to enter this information? Is there a link within apple.com? This is my first apple computer so I'm not a proficient user. Thank you
Sign into the App Store with your Apple ID. App Store should be in the Dock.
Cheers
Pete -
I just update my macbook pro software last week.....
I just update my macbook pro software last week, and my battery life drop from 5hr to 2hr, even when full charge. anyone else faces the same problem?
Here you go: http://www.apple.com/macosx/uptodate/
-
Just bought a MacBook Pro and when i try to get the free download of Lion it aks for my details but one of them is State which only alows 2 charecters and I live in spain....
How do i get my free Lion update????Thx i found the answer
https://discussions.apple.com/message/15658181#15658181 -
I just bought my macbook pro and it's charged up to 100% and is still plugged in but now shows the battery at 98%. How is this possible when it's plugged in to the charger and the green light is on?
The system regularly lets the battery drop to about 95% when on the charger, then recharges to 100%. This lets the batery exercise "just a little" all of the time and saves the recharge curcuits from overuse.
Regualr occurence for me.
Also ... you need to let your battery work at least once per month. Let it run down to 40%, but not less if you can at all avoid it. Running thr battery fully dead will shorten the battery life significantly. -
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?
Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I just bought a macbook pro and want to use my own iCloud account for my iPhone. How do I sign off of the current account on my iPhone and sign in with my own iCloud account i set up my mac?
On your phone, Go to "Settings", "iCloud", scroll to the bottom and "sign out." Assuming you have the the account password/security info of the current account, it will delete everything iCloud related upon your approval (don't worry, everything will remain in the cloud.) Once signed out, in the same settings location (under "Settings", "iCloud") sign in using your Apple ID and Password.
Hope this helps. -
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
-
Bit of a tough one...I have a hard drive, iPod and iphone synced to an itunes on a computer that's been irreparably broken. Just bought a macbook pro and want to try and salvage everything onto the itunes on there. Any ideas?
Yeah it seems to be fine although I'm a bit reluctant to fire it up with the Mac just incase. Thanks for the response btw
Maybe you are looking for
-
Win 7 pro smooth window exit and open not working
Hi all, I have a thinkpad T400 and after playing GTA San Andreas,(the colour scheme got changed to windows 7 home basic) when I closed the game, the scheme changed back into windows 7 pro. But, I have noticed that when a window opens, it opens sudden
-
Get Information From File Name
Hi, I have a somewhat general question, is it possible to extract certain "elements" from a file name? For example: x0 xxx abc 123 xx xxxx.avi (or any type txt, jpg, and etc...). Assuming that the "abc" is constant throughout the files but the digits
-
USB Drive Resets during file copy, interrupting file operations
Fresh Arch Linux install, working USB thumb drive (Windows, previous Arch Linux setups, etc.), formatted FAT32. Seems to randomly reset, eject, and auto-re-mount during extensive file operations (i.e. copying 4gb worth of 800 files from the USB thumb
-
Email submit button concatenate subject and body
Hello Expert, I'm trying to modify what the body of the email will look like once the user has pressed an email submit button. In Livecycle designer, I clicked on the button and viewed java script code this.resolveNode("#event.#submit").target = "mai
-
New class with actionPerformed
This is part of my code: //setup buyerJButton buyerJButton = new JButton (); buyerJButton.setText("Buyer"); buyerJButton.setBackground( Color.YELLOW ); contentPane.add( b