I just updated to Firefox 6.0.2 and now the two finger scrolling on my touchpad does not work.

It is an ELAN Smartpad 2.2, with up to date drivers.

Type '''about:config''' in the address bar and hit Enter key. When you see a warning, click '''I'll be careful, I promise!''' button
-> In the '''Filter bar''', type '''trackpoint'''
* right-click '''ui.trackpoint_hack.enabled''' preference, click '''Modify''' and change the value from '''-1''' to '''1'''
* click OK
-> Close '''about:config''' tab
* Close Firefox (click '''Firefox''' button and click '''Exit''')
Now you should be able to scroll using Trackpoint and Middle Mouse button on the Trackpad again.
Check and tell if its working.

Similar Messages

  • Just updated my iPhone 4S to ISO6 and now the phone will not pair with my car(Lexus ) is this an issue with the car firmware or iOS 6?

    Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?

    Was it pairing before the iOS update?
    If so, delete the pairings in the device and the car, then try again.
    If it was not, the issue is most likely the car.

  • I just updated my MacBook (9/20/13) and now my Wifi won't turn on. Does anyone have a similar problem or know how to fix this?

    I just updated my MacBook (9/20/13) and now my Wifi won't turn on. Does anyone have a similar problem or know how to fix this?

    I just completely shut down and turn on computer and wifi came back

  • I can not download the last Iphoto update, and in the actual version 9.4.3 it does not work the sending photos by e-mail.

    I can not download the last Iphoto update that I already purchased it by app store, and in the actual version 9.4.3 it does not work the sending photos by e-mail.

    Thanks for your replay,
    Finally the Iphoto 9.5 was installed...any way ..I had to go to app store to purchase it because the previous version did not updated autimatically... only shoed me that there is a new version ...but it guided me to the app store to purchase it.... and I did it because I did not know that the up date was free...and the sistem did not adviced me about that...
    I have the last up date of os x 10.9 already...
    in this new version I have no problem to send the photos by e-mail... but in the previous one it allways showed me an error message like ¨I should try later because the server does not work¨  but I tryed with 4 differents e-mail account that worked perfectly in the app Mail.
    any way, this new version is ok..
    thenks a lot
    Damian from Buenos Aires

  • Just updated to firefox 3.6.8 and now my laptop's hard drive failed after subsequent firefox crashes.

    I just updated to firefox 3.6.8 this morning after getting prompted to update as I started firefox. The firefox update successfully installed page said that I should update to the latest adobe flashplayer, so I did that as well, although that installation failed for whatever reason. I figured that I would update it later. I started watching live streaming videos on a website, and it was working for awhile, but firefox started to not respond. I tried opening up task manager, but even that started to lag and took minutes to open. The problem seemed resolved for awhile, but firefox started to not respond off and on, task manager stopped responding completely, explorer crashed, and my computer blue screened. It wouldn't even get off the blue screen after minutes of waiting, so I shut my laptop down manually. I'm positive that this couldn't have been a virus, since I only visited my usual websites, and I have both adblock plus and noscript installed. As for my laptop now, it won't boot to windows vista. I tried the hard drive test and failed. Now my laptop isn't even able to turn off no matter how long I hold down the power button. It's not an old laptop, so I doubt that it was just time for it to die.
    I have always been a fan of firefox, but this is just horrible. I don't know if it was firefox's fault but it sure seems like it...
    I'm currently on my older laptop, since my other one is obviously dead now. My broken one had vista installed and again, firefox 3.6.8 version.

    I have the same problem. I have never had a problem with Firefox before, and use it as my main browser. However recently, after updating to 3.6.8, its been crashing all the time. Up to 20 times an hour. Usually it occurs when I click a link from a Google search, or in Yahoo. Even if I send in a crash report and restart Firefox, it crashes as soon as the same page is brought back up, or the same link is clicked. I have also had it crash when completely idle. Its very frustrating as it is my favorite browser. I've resorted to using Google Chrome for the time being.

  • I've just updated to iOS 5.0.1 and now the ipad is not recognised, how do I correct this?, I've just updated to iOS 5.0.1 and now the ipad is not recognised, how do I correct this?

    I've stoped and restarted the AMDS but no change (this worked when I had the same problem with the iOS 5.0 upgrade), what should I do next?

    I had this symptom but adding +1 to telephone numbers nor the *228 reprogram worked. I found the solution in a kb article and documented the solution here:
    How to sync Contacts after iOS 5.0.1 update
    ..Mike . Silver Spring, Maryland, USA

  • I just updated to Firefox 3.6.12 and now every time I click anything online a new tab opens. How do I return to normal (clicking a link opens it in current page and tab)?

    I'm used to clicking a link on a news story or any searched link on google and having my current page go there. Now my current page stays the same and any link I click opens in a new tab. This is very annoying. I just want my browser to go there.

    Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
    [http://www.google.com/support/toolbar/?hl=en] <br />
    Or visit the Google Toolbar forum. <br />
    [http://www.google.com/support/forum/p/Toolbar?hl=en]
    As far as your UserAgent showing Firefox 3.0.11, see this: <br />
    https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware.

  • I just updated to Firefox 17.0.1 and now I can't click on a bookmark to open it or open new tab when clicking new tab button.

    In FF 17.0.1 I have several bugs to mention. I am only able to open bookmarks by right clicking them and selecting Open In New Tab from the drop down menu. I am unable to open a new tab by clicking on the new tab button or by clicking open new tab from the FF drop down menu at top of browser. Also, none button work in FF, such as Home, Back, Forward, or refresh. This is so aggravating!!

    After I posted this, I restarted with add ons disabled and it worked..deleted a cpl of addons for compatibility checking and that fixed it.

  • HT201412 just updated a game on my ipad and now the game will not work stays stuck on one screen how do i unfreeze it?

    just downloaded an update to the game hexagong and when i started to play it it wouldnt move off the first screen any suggestions on how to fix this?

    1. Double-click the Home button to close all Inactive Apps in Task Bar
    2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
    3. Tap the minus sign to close Apps
    4. Tap center of screen to return to Home Screen

  • Iv just updated my iphone 4s to ios7 and now the phone will not charge or hold battrry life .the phone was working fine before update whats going on ??? software or hardware

    iphone 4s need help battery not workin since uptade of ios7

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I just upgraded to Firefox 5.0.1 and since the "lock" icon never appears when accessing secure websites, where should I look for it?

    I just recently upgraded to Firefox 5.0.1 and now the "lock" icon doesn't appear anywhere (I can find) when accessing secure websites. I haven't seen it once. It used to appear in the lower right corner of the screen. I also have Norton Internet Security.

    Padlock is no longer part of Firefox; it was removed beginning in Firefox 4. The padlock shows that there is a secure connection but does not supply additional information. You could have made a typographical error and still have been connected to a secure connection. The padlock was replaced in Firefox 3 with the Site Identity Button. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
    *https://www.mozilla.com/en-US/firefox/security/identity/
    *https://support.mozilla.com/en-US/kb/Site+Identity+Button
    *http://www.dria.org/wordpress/archives/2008/05/06/635/
    You can install this add-on if you wish: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • On a MS Vista platform I just "upgraded" to Firefox 10.0.2 and now cannot connect. My wireless devices go throught the same DSL line and work. fine. 9.0.1 (previous version) worked fine. Suggestions?

    I just "upgradd" to Firefox 10.0.2 and now cannot access the internet. This is an MS Vista platform. Wireless devices, through the same DSL line, are still fine, suggestions?

    Did you try to view this article? [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Problems connecting after Firefox Update]
    You should also try using Firefox in [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode]
    Thanks,
    Borian

  • I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

    I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

    Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
    Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
    If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
    In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

  • TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

    I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • Ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox although my mac switches to the firefox window as this is my default browser- what to do? Previously this has always worked without a hitch...

    ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox athough my mac switches to the firefox window as i have this set to be my default browser- what should i do?

    I have the same problem, and I also wondered if Google toolbar has anything to do with it. There GMAIL was set as the default mail application at first. I have removed that setting, but Firefox 4.0.1 continues to use GMAIL instead of Outlook which is my selection for mailto handling.

Maybe you are looking for

  • Sort images in Organizer by file name?

    I'm running PSE 6 on XP. I have a group of about 80 photos that came from scanning of a hard copy photo album. I have tagged all the pictures with a unique tag. I was wondering if I could change the 'view' of these images so that they would be displa

  • How to view the SQL statement generated during execution of the BW Query?

    Dear Experts, I am trying to retrieve data in a SAP BW Query from a Non-SAP system. I think if I am able to see the complete SQL statement that was generated when I executed the BW Query, I may be able to use it to retrieve the data. Do you know how

  • Bw 7.0 v/s 3.5 urgent

    hi all,         presently i am working in bw 3.5 but our company upgraded from bw 3.5 to bw 7.0 there for i don't no about the procedure for creating 1. DataSource 2. InfoPackage. 3.Datatargets 4 transformations rules 5. DTP i just create data source

  • Connecting to smb servers

    Will Yosemite address the Mavericks problem in connecting to smb servers?

  • FORALL ... SAVE EXCEPTIONS

    Hi folks, I want to transfer BULK data from exception_test1 to exception_test2 with FORALL ... SAVE EXCEPTIONS procedure execute successfull but no data transfer & no exception raise.. create or replace PROCEDURE forall_exception AS TYPE t_tab IS TAB