I just updated to Mavericks and now my iPhoto won't open

I just updated my imac to mavericks, now my iphoto wont open. how do I fix this

Ah, thanks for the correction Terence.
I didn't realise the earlier versions still worked. I know that when I upgraded to Mavericks I then had to upgrade from iPhoto 9.4.3 to 9.5 in order for it to work. I guess we need to know which version Ibarber4 is currently having problems with.

Similar Messages

  • Just upgraded to Mavericks and now System Preferences won't open (error -1712); suggestions about what to do?

    Just upgraded from Lion to Mavericks.  Free download, install and reboot went fine.  When I go to System Preferences to customize the desktop, etc., I can't open it.  Error number is given as -1712.  Anyone else had this problem?  Any suggestions about how to fix it?  Thanks!

    Get onto the App Store and download/purchase the Mavericks version of iPhoto.

  • I have a MackBook Pro I updated to Maverick and now my internet won't work and all my programs freeze and I have to restart my computer.

    I have a MackBook Pro I updated to Maverick and now my internet won't open and all my programs freeze and I have to restart my computer. The only program that doesn't freeze is Microsoft Word.

    Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

  • I just updated to Maverick and now my .mac mail account is not receiving any incoming mail.  Please help!

    I just updated to Maverick and now my .mac mail account is not receiving any incoming mail.  Please help!

    Try going to Mail/Preferences/Accounts/iCloud/Advanced and setting Authentication to Apple Token.

  • I just updated my itunes and now I am unable to open any of my songs... please help me.

    i just updated my itunes and now I am unable to open any of my songs... please help me. Every time i click it, it says it cannot be read because it was made by a newer version of itunes.

    Try resetting the Nano with it still connected to a high powered USB 2.0 port on your PC. To reset the iPod, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • I updated my computer to the mavericks and now my iPhoto won't work

    I updated my computer to the mavericks and now my iPhoto won't work. And when I go to update iphoto, it says it cant be downloaded onto my computer.

    Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
    <Edited By Host>

  • I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    iLife '09 is not available as a download - it is only available as a purchase
    iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
    Exactly what did you do? And exactly what does the error message say?
    On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
    LN

  • I just updated my IPOD and now the only apps that open are the ones that came on it! what do i need to do?

    i just updated my IPOD and now every app except the apps that come on it wont open.

    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - If not successful try downloading/installing a new app. Pick a small free app.

  • Just updated to Maverick and now I cannot open any of my applications on my Airbook.  It shows the program running but no windows appear on the screen.  Help!!!

    Any ideas as to why the applications do not open in a window?

    Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?

  • I have just updated my itunes and now my phone won't show up when i plug it in to connect to itunes, what can i do? is there a solution?

    I have just updated my Itunes to the latest version, now when I plug my phone in using my USB, my phone won't appear on my Itunes. Now I can't sync my music, can anybody help please?

    See this thread: iTunes 12.1 Not Finding iPhone

  • I just downloaded ios 7 and now my phone won't open, anyone know how I can open it?

    I downloaded ios 7 and at first my phone worked fine, I locked my phone and now I cant unlock it even though when someone calls the phone rings.  Does anyone know how I can fix this?

    Hello there, Mark2s.
    The following Knowledge Base article offers some great steps for troubleshooting your issue with charging your phone:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I upgraded to Lion and now my iPhoto won't open and I don't know where my pictures are

    I upgraded to Lion and now i don't have Iphoto anymore.  Where did all of my pictures go??

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • I just updated to Mavericks and now I can't get my toshiba external HD to show up. It appears in Disk Utility but not in my finder. In Disk Utility it is grayed out and will not allow me to mount. Ive verified and repaired it. Nothing!

    I cant take it anymore. Pleae someone help me. I cannot erase my HD becasue it has all of my pics for my kids and all of my movies school work. I need this fixed please

    Hi Liz,
    Sorry to hear you are having a similar problem.  Last night I went to the tool bar at the top of iphoto, clicked on "File",  then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups  opened the iphoto pages in the Time Machine.  I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked  "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1).  I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do. 
    The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu,  when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.  
    I am now a happy camper. 
    I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto,  that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"? 
    Good luck Liz,  if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
    Karen

  • Just updated to mavericks and now iphoto wont work. wont let me update as has previous owners appleid in command field and wont let me change

    can anyone help? bought my macbook pro second hand and when i try to update iphoto so that it works in Mavericks it has the previous owners appleid locked in the id field and wont let me change so i cant update. i have logged into my account but makes no difference....????

    A very good post by Linc Davis.
    Linc Davis
    Re: I bought a used MacBook Pro (mid 2010).  How do I change settings so that I am the owner instead of "tourist"? 
    Feb 16, 2014 11:56 AM (in response to Dee SeaWarrior)
    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter theserial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to thetechnical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the Ckey at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • Just updated to Mavericks and now I can't update iPhoto

    When I try to update my iPhoto, it says an error occurred and to try again. I've tried several times now. I've tried rebooting my computer and then trying to update it, but to no avail. Any suggestions?
    Thanks
    Linda

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Maybe you are looking for

  • Creating a backup of a hard drive continuously

    Hey, I'm thinking of getting another hard drive which would be for backing up my entire hard drive. I'm not sure whether I'd want this to backup continuously (i.e. if I downloaded a file, it would go straight to both hard drives) or backup at certain

  • Mac Mini - Screensaver starting on its own and clock is fast ...

    Hi there experts .... I've got a 4 month old Mac mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.53 GHz I've noticed for the past couple of months the clock is 4 minutes fast .... And the screeensaver is coming o

  • Shuffle works with mac, but not PC

    I bought an ipod shuffle two days ago and I wanted to try it out right away. At the time, I only had my macbook with me, so I put the little music I had on that on my shuffle. It worked fine then. When I was able to get on my PC (that has all my musi

  • DNG files don't display in Preview or Finder but okay in LR5

    Virtually all of my DNGs from the last four years do not display properly when previewed in OSX's Finder or opened in the Preview app. Everything in Lightroom works just fine. I note that the "linear" option is off (seems to be the default) when I im

  • Record count per message

    How do we count the number of records send in a message. the scenario is from FTP to Proxy. No graphical mapping involved. Need to count the number of records that XI processed for a particular message.