I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

Similar Messages

I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it.

I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it. I have worked through all of the suggestions in HELP. The autofill prompt appears when I start to fill in a form but doesn't then provide the option box to select autofill from my contact card, the autofill prompt remains on the screen and can only be cleared by closing Safari and then reopening it. This never happened before and in fact autofill has been working perfectly up until now.

You can create another iCloud account easily enough, but you will only be able to create a new @icloud.com address to go with it, not @me.com - and you can't transfer your @me.com address from the other account.Creating a new account will have no effect on the existing one.
However you don't need to create a new iCloud account to create an additional ermail address. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a
While you can delete aliases, you cannot delete the address you created when you opened the account.

I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to wifi at all

I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to the wifi at all I'm tapping the wifi and nothing is happening?

See this. http://support.apple.com/kb/ts1559

Will not restore or connec to itunes - just get the itunes logo and usb cale display on screen

ipod touch will not restore or connec to itunes - just get the itunes logo and usb cable display on screen

Hello...Any help? i cannot be the only person with this problem. My coworker is actually dealing with the same problem!!!!
As an update i uninstalled and reinstalled all ipod updates and Itunes completely. Still only have the folder with exclmation point problem. I have followed all of Apple Ipods websites support tips. no luck..
Please help...

My iPod touch does not connect to my iMac, it just displays the iTunes logo and a USB connector on the screen?

When I conect my iPod touch to my iMac. The screen on the iPod touch displays the iTunes logo and a picture of a USB connector. The iPod touch seems to be frozen in this state. can anybody help with this problem?

iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I updated my itunes for my ipad while connected to my computer. now my ipad shows only the itunes logo, an arrow, and a usb cord. it is frozen and nothing works, HELP!

I updated my itunes for my Ipad while connected to my computer. Now my ipad is frozen on an iTunes logo, an arrow, and a usb cord. Nothing seems to fix it. What can I do. All my business calander, etc is stored on my Ipad. HELP!

I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.

HT1414 i have tried to erase all content and reset my ipad due to selling it and upgrading to a newer model, when i switch it on it just shows the itunes logo? is this right?

hi i am selling my ipad and have erased all content and reset it and now when i switch it on it just shows itunes logo is this correct?

start iTunes,
plug in your USB cable
switch off your iPhone
press holding home button(the round button in front of the Phone)
plug it on to the USB cable
keep holding the button
till iTunes says it found a iPhone in recovery mode
then click restore as a NEW iPhone
then sync!?
http://support.apple.com/kb/HT1414

My ipad is frozen when i try to turn off or on it just shows the itunes logo and the plug in icon

My ipad is frozen with a itunes icon and the plug in icon I can not turn it off or on When I try to it just comes right back to the itunes and plug in icons

It is in Recovery mode and needs to be connected to a computer running itunes.

I have updated on line when I was prompted to do so, and now my phone won't turn on it just shows the itunes logo and the usb plug on the screen What do I do to get all my icons and everything back to normal. i will lose info if I hit the restore button.

My phone is not coming on except for the usb cord showing in the screen with an Itunes logo after doing an update that I received on line when putting my phone into the station for the night, I saw that there was an update so I said yes. Then this happen. Could someone please help me here, because I do not want to restore or I will lose everything I have with numbers and music in my library. Please advise and respond to me. I use my phone for work as well and can not get the contacts up or anything except for this itunes and usb showing on the screen.
Thank you,
Diana

Hi there briana_webb82,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

Ping authorization via e-mail doesn't work. I have an iTunes account but must seek authorization for Ping. I don't know why this is but I never get an e-mail message with the link. Why?

Hi. I use iTunes for podcasts and to burn MP3s from audible.com. It works great except PING. I need to confirm my identity to the PING server. It purports to sen me an e-mail but I never get it. Why is this?

Hello Ulrich,
thank you for your answer. Concerning the dataflow I agree and it is what I usually do. Actually I follow the dataflow paradigm whenever there is no problem (the 'false case' in the screenshot):
“FW102x Initialize.vi” -> “FW102x Get Position.vi” -> “FW102x Set Position.vi”.
Whenever there is a mistake, this just doesn't work with these drivers. The sequence
“FW102x Initialize.vi” -> “FW102x Get Position.vi” -> ///error/// -> “FW102x Close.vi”, “FW102x Reset.vi” ;; “FW102x Initialize.vi”
will give me errors for “FW102x Close.vi”, “FW102x Reset.vi” and “FW102x Initialize.vi” reporting "session handle not valid". However, if I "bypass" the instrument handles directly from the first "Initialize" to "Close" and "Reset", they will report the same error, but the second "Initialize" will work again. I can even merge the first two frames and execute "Close" and "Reset" at the same time to do so. But whenever I try something else, e.g. do the 'correct' wiring, I am unable to close, reset or reinitialize. I have to restart LabView completely, to make the vi work again. So I guess the session is still hanging around somewhere in memory, but I can't access it anymore.
Surprisingly, wherever I put Probes on the data handle wires they show the correct "ASRL5::INSTR" (with or without correct wiring). But only the "Bypass" wire makes the vi work. Since you couldn't find the drivers in the driver network, I guess they might just run into problems, if an error occurs.
But thanks for your comment anyway. The problem is fixed for the moment. It's just that I prefer to actually know what I am doing here instead of producing some code I'd rather not show anyone.
Carsten

I just upgraded to ios7 on my iphone 4s and now have now sound when it rings

I have tried everything I can think of in settings. Now that I have updated to IOS7, I don't have any sound when the phone rings. How can I get this fixed?

Hey firestonov,
Thanks for the question. I understand that you are experiencing issues with sound after updating to iOS 7. To troubleshoot, let’s first restart your iPhone:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Additionally, check to make sure your ring/silent switch is not toggled, as well as Do Not Disturb:
Ring/Silent switch - iPhone
http://help.apple.com/iphone/7/#/iph3bd01398
Ring/Silent switch
Flip the Ring/Silent switch to put iPhone in ring mode or silent mode .
In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.
Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent.
For information about changing sound and vibration settings, see Sounds and silence.
Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap the Do Not Disturb button . See Do Not Disturb.
Thanks,
Matt M.

My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it?

My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it? My phone died and I went to plug it in and it just displayed the itunes logo. It will not turn on at all. I plugged it into my computer in an attempt to connect to itunes with hoped of it turning on, yet nothing popped up as if it wasn't registering. Please help!

http://support.apple.com/kb/HT1808

Upgraded to iOS4 on my iPhone 3GS and now iPhoto images are blurred...WHY?

I've just upgraded to iOS4 on my iPhone 3GS and the iPhoto images are blurred? WHY?
They were fine before...so now my screen saver is blurred and looks low res...all my images are crap quality...what is going on Apple?
Checked the photos on my laptop and they are crystal clear...anyone else have the same problem?
I wish I'd stuck with the old software now.

I also had the same issue. I upgraded my iPhone 3Gs to the new software about a week ago. Yesterday the photos on my phone were blurry. I "googled" the issue and ended up here. Synced my phone and now all is well! thanks for the help.
amy

I just upgraded to to Tiger 10.4.7 and I lost my in box

Howdy from NZ,
I just upgraded my software to 10.4.7 and mail transferred all of the files except my inbox (the most crucial) It tranferred all of my wifes inbox, all drafts, trash, and deleted. Any suggestions on finding my inbox? The one I need most?
Cheers,
John

Hello John.
This is a known issue. The conversion from Mail 1.x to Mail 2.0 is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
If this is a POP account, the following procedure should allow you to fix the Inbox problems:
[Note: For those not familiarized with the ~/ notation, it refers to the user's home folder.]
1. Quit Mail.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn't need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the mbox file out of INBOX.mbox and into the Inbox Old folder just created on the Desktop. This file contains all the messages that were in the mailbox before the upgrade to Tiger (maybe even some messages that had been deleted).
6. Move any strangely-named Messages-XXXXXX folder to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or a re-indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn't work as expected. If you've been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox file only. Now, proceed as follows:
8. Open Mail.
9. The account's Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that's not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that's on the Desktop. Do with the imported mail whatever you wish. You may move to the account's Inbox the messages that Mail failed to convert properly, and delete those that did get through and, hence, are duplicates now.
The following collection of AppleScripts has a Remove Duplicates script that can be useful for removing duplicate messages:
http://homepage.mac.com/aamann/Mail_Scripts.html
If all is well and you're not missing anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Ask for any clarifications or if you need further assistance.

Upgraded to iOS6 and now charging cable doesn't work

I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work. No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer. If I plug my iPad charger into it, it works fine. How can the new operating system determine what kind of usb charging cable it "wants" to accept? This charger and cable worked flawlessly before the OS upgrade.

Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!

I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

Similar Messages

Maybe you are looking for