I just upgraded to OSX 10.8 and now my compute will not unmute!

I went to watch a video and got no sound so I hit the volume up key and got no responcse. Then I trired to move the slider up by the WiFi signal and I can't move that at all. I went to the System Preferances and right next to overall volume it shows the mute checkbox to be checked but it is grayed out and can not be unchecked.
Any Ideas as how to fix this?

I got it back with one reboot and have not lost it since. I would say it is a problem with seeing that the sound was off when the new OS was installed.
As for the rest of your reply that is some elitist BS. The only OS that will not have any problems is the one you build your self but then it might also not run a lot of the software you want. In my years of computer use I have had no more problems with DOS,3.1,95,98,XP,Win7 and now Win8. then I have had with OS7,8,9,10

Similar Messages

  • I upgraded my iphone 4 ios and now my phone will not restore -, i upgraded my iphone 4 ios and now my phone will not restore -

    i upgraded my iphone 4 ios and now my phone will not restore -

    I have run into the same problem. 
    1.  I was sharing the same itunes account with my wife for both of our iPhones 4s.  She upgraded her phone to IOS7 two weeks before I did.  After I did we ran into problems with messaging.  Because we shared itunes account, both iphones were linked.  When I sent text messages to someone, she got a copy. When they replied, she got a copy.  I tried several ways to remove her phone from my profile, but would not work with new IOS7.  I had to create a seperate itunes account for my phone in oirder to do so, as recommended on several help forums.
    2.  I backed up my phone onto itunes before setting up seperate itunes account.  It showed that all the photos, contacts, notes, apps, etc. were synced and backed up.
    3. I logged off itunes (former shared account- now wife's account), logged into new itunes account, and proceeded to restore my phone, while logged into my new itunes account, thinking this would delete my wife's phone from the profile as shared devices.
    4.  Phone would not restore by automatically syncing with itunes, by selecting back up recovery file to recover, or even by deleting everything and starting fresh as if it were a new phone, then trying to restore the data file as if it were recovering the backup info onto the new phone.
    5.  I get the same **** initialization loop sequence on the iphone every time, even after itunes goes through the recovery process, syncing all data, etc., multiple times.  The iPhone loops through the grey screen "Welcome" in different languages, then asks which wireless server I want to connect to, enter passcode, then asks if I want to set up phone as a new device, backup from iCloud, or from iTunes backup.  It does not matter which I select.  It prompts me to connect to iTunes again.  The point is, I have already been through these procedures and the iPhone cannot get past this point and enter run mode, showing me a screen with all my recovered settings. 
    For time being, just to have a functional phone, I have had to delete everything off the phone and set it up as a new device, back to factory settings. Then the phone will get past this and enter into run mode showing screen and apps with factory settings, no contacts, no email ( have to set up again), no voice mail ( have to reset).
    Any ideas on how to over ride this reset mode in the iPhone, when all I want to do is download and recover settings from a backup in iTunes to the device?

  • I have just done IOS update and now my computer will not recognise I-Phone is there anything I can do?

    I have just done the IOS 5 something update on my phone it went to back up and now my computer does not recognise my phone and the phone screen just has the ITunes symbol with an arrow and usb cable on it.  Does anyone have ideas of what I can do?

    More info for you, I have not had the phone jail broken or anything like that. Please help as my phone has everything on and was fine before I did the update.

  • Just tried to upgrade to SnowLeopard with new software. iLife failed to download and now the computer will not start up--grey screen with lines going round and round in a circle. What can I do to get it to start up?

    Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?

    Mac Pro - Mid 2010
    Processor  2 x 2.66 GHz 6-Core Intel Xeon
    Memory  8 GB 1333 MHz DDR3 ECC
    Graphics  ATI Radeon HD 5870 1024 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    This is a brand new machine that I just purchased from Apple. It was delivered yesterday
    The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
    I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
    Same issue - nothing but a grey screen when the system tries to boot from the DVD

  • I upgraded my iphone4s to ios7, and now my photos will not transfer to my computer by photostream .. help ?!

    I updated my phone to ios7.0.2, and now I am unable to transfer my photos to my computer via photostream. I've even tried turning off photostream and starting all over again .. nothing has worked ! Help Please !

    I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

  • I upgraded to 8.0.1 and now my settings will not sync (download settings) from the cloud.

    I updated Premiere to 8.0.1 yesterday and now I am un able to sync my settings.
    I want the settings I have in adobe cloud to be downloaded to my current computer and every time I try and sync it goes all the way to the end (yellow progress bar goes all the way across) and then I get an little box saying Syncing Settings Failed.
    I tried logging out  in Premiere and then logging back in.

    Hi bumpfilms,
    Please go to https://creative.adobe.com/appsettings and sign in.
    Click on clear all settings or clear settings of a particular application (Make sure the application is closed)
    Open CC application sign out and sign in again and then try to sync the settings after launching the application again.
    Regards,
    Vinay

  • I have just updated my iphone to ios6 and now my music will not update?

    I have only heard bad things about the ios6 update, hence why i have been postponing up dating it.
    so i finally do update it and now this?!
    When i re sync the music it will not update at all :/
    if any one knows how to help it would be muchly appreciated

    See if this helps
    http://support.apple.com/kb/TS1559
    if not, it is a hardware failure. Contact Genius bar for evaluation and possible replacement.

  • I just updated to the new Itunes and now my phone will not connect to my computor.

    I updated  to the new Itunes and my Iphone will not connect to my computor now?

    Hi kevin n tracey,
    If you are having issues with iTunes after an attempted update, you may find the following articles helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • My mac book pro does not boot up correctly anymore after doing some updates. I did have my ipod charging to my mac book. I ran the simple updates and never go to the maverick update and now my computer will not boot correctly. Help!

    Please help my computer is not repsonding after doing some simple updates. I follow the instructions and which is simply click for the update to take place. I did what I was instructed to do. I did not do the new update for the Mavericks yet. I just did simple updates. The computer shutted down and restarted but would never get pass the grey screen with the spinning wheel and the booting bar that would not go past a certain point befor shutting off again. The computer is practically brand new. I purchased the computer from best by 2012 and the warrenty just ended the past October. I hardly use the computer maybe 4 times since I have had it because I have another main computer that I uses. However, I don't want to do a hard rest becuase I do have the entire adobe suits software that I paid for and don't want to loose. I have an appointment with apple today to see what they say but I hope that my computer that I hardly every use is not defected after doing a updated pushed by Apple. Any thoughts or suggestions???? Thanks in advance Apple Family :-)

    Well, I was at Apple for sometime on that day. I got a Genius that did not want to work. She basically jumped to the money to tell me that my hard drive was no good and that I was out of warranty (October 2013). I began to explain to her that I had only used the computer 5 times and that I don't use this computer as my main computer because I also have a Toshiba that is less expensive that I have had for several years and not one issue out of it. The rep told me that I could by a new hard drive for $161.00 and that I would loose all of my software and photos that I have on this computer. However, I told her that it's bazaar that it happens right after my warranty goes out and had I used it more often when in warranty before October then I would have been covered. Keeping in mind that I would still be very disappointed with the product because I would loose all of my information and it would not make sense to me why the hard drive fails on a very gently used computer. So I asked for a manager and it took her some time to get one. In the mean time I watched how the other Geniuses interacted with the other customers and seen that they were very engaging with convo and very help. I guess I just I got another lemon when I got my rep. When the manager finally came. I went from A-Z with the issues and that I felt that something could or should be done because the rep said that she did tests on my machine and it read to her that my hard drive was bad and there was nothing that could be done. I explained that I was not looking forward to paying for services to have my new computer repaired. The manager offered to give me 25% off the cost but I still didn't feel that it was effective. After he left and the rep wrote the notes in the system, I told her that I didn't think that all options had been exhausted and that there was something else that could be done. I told her to erase the machine and see if the updates could be installed and if the system would continue to do the same thing. The rep was hesitant and said that I would loose everything which we already know that we were at conclusion from the beginning. She assured me that I would happen again and that I would need a new hard drive. I just told her to erase the machine and get me another manager because I was just getting tired of her unhelpfulness and negative perspective. The new manager came and was very pleasant and I explained everything once again from A-Z. I informed him that I had the machine erased and that I need his help with options because I don't feel that the rep or the last manager was resourceful or helpful. He apologies for the actions of the reps and proceed to tell me that they will run all the updates in the store and that if it booted correctly that I should continue to use the machine with out adding the adobe software back on just incase that it crashes again and I'm out of money once again. However, if it does happen again and it is a hard drive issues that he would work with me to resolve the issues. As my computer went through the process of rebooting from out of the box stage another rep approached me because he could tell that I was upset and not happy. I told he what had happen and he said I think I can help you a little more. He said that I just want to run further testing on you computer for different components to make sure that everything would work properly and pin point any issues. I was delighted with that option. Anything would help at this time especially someone who is willing to help. The first test that he ran was to for the hard drive and he said that since it failed the test the first time could be because the software update glitch and did update correctly which would make the test faulty and be negative. As I sit with finger crossed the test came back as a pass test that my hard drive was not the issue and that the update was the cause and that I did not have to buy a new hard drive. I was happy that the computer was ok but I lost information. All of the updates were done in the store and everything works fine now. If I was not persistent about my gut feeling then I would had left out thinking that I had to pay for a new hard drive that I really didn't needed. Now I can invest that money in a external hard drive to start backing up my information. Lesson learned by I'm still on the fence about things but I hope all is well. I really went through a lot. No help or no service was not an option that I was taken.  I hope that it helps.

  • HT2954 I changed my email address on Gmail and now my computer will not recognize the new password when I modify my account?

    I changed my email password on Gmail last night.  I then went into settings on my MAC to reflect the changes but it will not recognize it.  I double checked to ensure I had the right password and it is. I can log into my email from safari with no issues.  I have varified that all account information is correct but its still not working.  I have also lost notes and contacts.

    Keychain is no longer able to update itself when I upgrade an application...
    http://unsanity.org/archives/2007_01.php
    Mail passwords not holding...
    If Terminal doesn't scare you, you might try this line in Terminal...
    sudo mv /var/db/CodeEquivalenceDatabase /var/db/CodeEquivalenceDatabase.old
    Carefully type your admin password when asked & hit enter, as it won't be echoed, then restart the Mac.
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server.
    So since WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.
    Is it POP or IMAP?

  • I upgraded to itunes 10.5 and now the store will not open.

    The bar goes about halfway (between the "g" and "I" in accessing Itunes store) and stops.  I can see words and hyperlinks in the store, but no pictures.  Have tried several of the fixes listed here, but so far none have been effective.  Anyone know what fix is best.  I am at my wits end and do not have the patience to go through every fix.
    Thanks.

    Had the same thing happen to me when I tried syncing my iPhone this a.m. - talked to Apple 7 hours ago and evidently there's an "issue" with the iTunes server. The Apple adviser told me to try syncing in an hour. Well, rather than do that, I've continued to check Twitter, searching on "itunes sync" or "itunes server" - seems the problem's still going on.
    I'm going to wait it out til tomorrow. Or whenever.
    The REASON I was synching is that ever since the iOS 5 "upgrade" photos that were in albums synced from iPhoto had disappeared. Not all the photos, just all the photos in some albums. Weird.
    Too many bugs in iOS 5 (syncing, Bluetooth connectivity, etc.). They should have waited til it was right before releasing it.

  • My macbook pro froze last night and I held the power button down to restart the computer. Now the computer will not even start up. Any ideas what may have happened?

    While searching the internet last night my Macbook pro froze up and would not respond to anything. I restarted the computer and now the computer will not ecen start up. It will go to the gray screen with the apple sign. It is there working for 10 seconds and finally shuts down again. Any ideas how to get the computer to come back to life?

    Go step by step and test.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836

  • I clicked all the buttons in the file sharing window and now my iMac will not turn on.

    I really goofed. I clicked all the buttons in the file sharing window (Screen sharing;File Sharing...Remote Login; Remote Management...Internet sharing) but I did not write down the IP address and now the computer will not turn on at all. Is there a way to roll back my stupidity and get this thing to turn on again?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

  • I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be seperated. What is going on here?

    I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?

    I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID.  However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?

Maybe you are looking for

  • SR Log Error - |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException

    Hi, We are getting below errors in /nwa/logs. We have our PI (7.11) and Service Registry configured on the same server. And have out CE (7.2) system connected to this service registry. Does any one has similar experience? Please let me know if you ha

  • Is it possible for the JDBC Lookup in PI 7.1 to read other user's table?

    Hi, I have the requirement of using the standard JDBC Lookup in PI 7.1. The user setup in the receiver JDBC adapter is only a service user that has a read access on some tables that are owned by another user or schema. When I am trying to do the impo

  • Printing problem with my web pages

    Hi all- I noticed a funny problem with one of my web pages. When I go to print, it only prints one page length of a webpage that should be two pages long (assuming you choose the shrink width to fit one page wide option in your print command). I post

  • Integrating EP 7.0 in EP 6.0

    Hi all At present ESS is up and running in EP 6.0. We are implementing Travel Management part alone in EP7.0 and planning to integrate with existing EP6.0. That is when a user logs in our EP 6.0 (ESS) we are planning to have an iView which navigates

  • FORALL & INSERT

    I am using FORALL to insert all the records in a plsql table to DB table. The order in which the columns are present in the PLSQL table is different from the order in which the columns are present in the DB table. Is there anyway to specify particula