I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?
I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?
Are you using ITunes 10.5? If so have you upgraded to the OS 5 software? Now it should tell you there's an even newer upgrade to the 5.0.1 when you try to sync your iPhone or iPad. Hope this helps.
Similar Messages
-
I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive, how to solve this problem?
Try some of the troubleshooting steps outlined below:
Troubleshooting an external hard drive
> Unplug the hard drive, wait a few seconds, and then plug it back in
> Restart the computer
> Unplug any other peripherals from the computer
> Plug it into a different USB port
If none of those steps work, see if it is recognized in Disk Utility.
Checking a disk with Disk Utility
To check a disk using Disk Utility, launch the Disk Utility application in any of the following ways:
> Type the first few letters of its name into Spotlight. Select it from the results.
> Go Launchpad > Utilities > Disk Utility
> Go Applications > Utilities > Disk Utility
Once Disk Utility is opened, check to see if your external HD appears on the sidebar. If it doesn't appear at first, try the troubleshooting steps above again while leaving Disk Utility open, each time checking to see if the external HD appears.
Austin -
I just installed the ios6 on my iPhone 4s and now I can't access my app store and the app passbook will not connect to the app store either. What do I need to do to get this working
Me too!! It's blank in homepage. Does anyone know how to fix it? thanks a lot.
-
I recently upgraded to Yosemite and got the new iTunes as well. However, the new iTunes 12.0.1 doesn't offer me the option to connect to my Airport Express. The Airplay icon on the interface is just the volume control. Does anyone know how to connect?
Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728 -
What can be done to fix this ???
Once I did the update it will not charge as quickly as it used to I mean like could be on the charger all day and not reach 100% and my friend has an iPhone 5 and she had the same problem the charger isn't broken and nothing is wrong with with place on the device for the charger she had to end up getting a new charger but I'm not buying a new charger when this was not my fault
-
i turned the breaker back on & everything but the tv came back on. is there some sort of reset button or is my tv fried?
Please include your full model number when posting problems on the forums. It'll help us look for specific issues!
Unfortunately I don't have much to offer here. If you can't solve your issue and no one in the community can help, you can try contacting support to speak with a tech support agent at (800) 631-3811.
- Peter -
I bought a new computer and now my IPad won't snc
I bought a new Apple laptop and now my IPad won't sync. It shows up on the left side but when I try to sync it, it says the apps installed can not be deternined. Does anyone have any idea what my problem is? Thanks in advance.
Did you transfer all of your iTunes content/iTunes library to the new Mac? If you didn't, have you transferred purchases into the new iTunes library from the iPad?
-
I just upgraded to the new mobile me calendar and now all my calendar entries on iCal have been erased. As I type this the calendar entries are still on the mobile me and iphone calendars. How do I restore the calendar entries to iCal?
Please always post your System details when you have a query. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
http://support.apple.com/kb/TS3397
Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
http://support.apple.com/kb/HT4330
Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required). -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.
I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best. -
I just upgraded to the new iphone 4, but am hesitant to get it plugged in b/c I don't know how to make sure all the apps purchased on my iphone 3 get to the new phone. can't seem to find instructions so I'm sure it just "does it", but hesitant to literally pull the plug. thanks.
Follow these instructions: iPhone: Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/ht2109
-
I'm running Snow Leopard, do I have to upgrade to maverick or can I just upgrade to the new one?
If your Mac's compatible with Yosemite, you can upgrade directly to it.
(116191) -
Hi
I have just upgraded to the new version of itunes on windows 7. I have just added 8 albums (Mp3 format) to my itunes library, synced with my Ipod classic and my wifes ipod nano, the albums have transferred to the devices but wont play when selected. Yet they will play in itunes.
When I select the album on the ipod, it opens up as normal but when you press play nothing happens other than a wining sound from the hard drive of the ipod.
My itunes library is a mix of itune purchases and mp3 purchases and this is the first time I have experienced this issue
Hopefully there is a simple explanation to thisIt is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I Just upgrades to the new system and can not see or use itunes on my iPhone or iPad, please help?
Easy,
Restart your PC, then restart your iPhone/iPad. Then once your computer reboots, connect the devices using the USB cable.
Let me know!
C -
i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx
You'll need to upgrade to Parallels Desktop 7 to regain compatibility. Good luck....
On Edit: A minute late!
Maybe you are looking for
-
Turning off my MacBook Pro with Retina display
Is it better to log off, and then shut down, or is it ok to just go to apple, shut down?
-
I'm doing an app for school, and I'm trying to find out the solution for the trivial task of getting a list of all file names in a directory so the user can select one and open it. What class can I use to take care of this?
-
Hi All, In table MKPF there is mblnr and mjahr In table BKPF there is belnr and gjahr In BKPF there is referance key field AWKEY In that field AWKEY i have to enter mblnr and mjahr and it will give Accounting Document Number In the code i have retun
-
Role Upload - Could not perform action
Gurus, I am attempting to upload a sampling of R/3 ECC 6.0 roles into the portal (EP6). I have the system connection defined and testing successfully. I unfortunately can not execute the upload function. After defining the selections that I wish to u
-
Word will not save new files or open ones recieved in ichat
Word will not save new files or open ones recieved in ichat i have had this problem before and had to take my computer to the apl store were someone at the genius bar fixed it by deleting some preferences thing i do not remember how who did it or how