I keep getting an error message that read 'an error occurred saving your changes to Apple database" while trying to upload an ebook using itunes producer? What gives
I've been trying to upload a nebook using itunes producer but keep getting an error message ' an error occurred saving your changes to the Apple database. This may be a transient issue on the Apple side' What's going on? It's been giving me this mesage for the whole afternoon.
Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90
Similar Messages
-
Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?
it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator] -
I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?
Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: go to Settings - iCloud - Storage and backup - turn off the iCloud backup
and backup with iTunes from now on
More info on backing up: http://support.apple.com/kb/ht1766
Or, if you prefer to keep backing up with iCloud, check out this article, it will help you understand how to manage the iCloud storage:
http://support.apple.com/kb/ht4847 -
Can someone help me install itunes? i keep getting an error message
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I keep getting an error message that reads "to update application sign into the account you used to purchase it"
I am trying to download Final Cut Pro X 10.0.9
I am signed in with the account that I purchased Final cut Pro X
I don't have another account I'm not sure what's going onWelcome to Apple Support Communities
Open the Mac App Store and go to Purchases. Do you see Final Cut Pro X listed?
If so, open a Finder window, choose Applications in the sidebar and delete Final Cut Pro X. Then, go to the Mac App Store and download Final Cut Pro X for free.
If you don't see it in Purchases, see if it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 If it doesn't work, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact -
Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.
Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens. -
Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, PaulYou can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec. -
I am trying to download the new version of itunes 11.0 but am getting an error message that reads "Feature your trying to use is on a network resource that is unavailable" Does anybody know how to resolve?
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)
-
I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?
Hi Noel,
I'm wondering whether your comment addressed to Lmono was intended for me Tmono.
You ask: "So why didn't you provide the same?"
It just didn't occur to me to do so.
My intent was to report that there was at least one other user encountering a similar problem. It occurred to me that Adobe might be interested in determining the scale of a problem which causes one of their best known products to fail to run quite so completely after a clean install
I also see that I misreported the OS I'm running - its Windows 8.
If there is further information I can provide which might be helpful in determining a solution, if someone could be specific about what would be helpful, then I will try to respond appropriately.
Perhaps the following from the event log:
Faulting application name: Photoshop.exe, version: 15.1.0.148, time stamp: 0x53d97a8f
Faulting module name: igdfcl64.dll, version: 8.1.0.2875, time stamp: 0x507eff6d
Exception code: 0xc0000005
Fault offset: 0x0000000000809283
Faulting process id: 0x1f48
Faulting application start time: 0x01cfca332430f3a7
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\igdfcl64.dll
Report Id: 659ea6c9-3626-11e4-bea1-9c2a70825e62
Faulting package full name:
Faulting package-relative application ID:
The X230 has Intel HD 4000 graphics support built in to the processor. Windows was pretty stubborn about refusing driver updates, but I just managed to get drivers from the Intel site to install and Photoshop is now running, so hopefully I need not try your patience any further.
In case anyone else has a similar problem and stumbles on this the way to install the driver that worked was to:
- download the zip version of the generic driver from Intel
- use the 'have disk' option in the windows dialog to install the driver - other paths in the UI did not work with windows refusing to install the driver. -
I have successfully installed itunes 10, then get an error message that reads, itunes was not installed correctly Error 7 (Windows error 127)
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I can''t download any apps to my ITouch. I keep getting an error message that says "unknown erro occurred oXE8003FE."
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
I cannot download OS X Mountain Lion, I get an error message that says: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Why am I receiving this message?
Servers may be overloaded.
One user reported:
Deleted file com.apple.appstore in /var/folders/, dissabled VirusBarrier X6: problem solved! -
Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.
If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT -
Suddenly, I am seeing an error message that reads: "The iTunes Library cannot be saved. An unknown error occurred (-54)". Can anyone tell me what that means? Am I in danger of my iTunes library being lost?
== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.
Maybe you are looking for
-
I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker. There is sound when we use the headphones. Is there a mute function that I may have switched on and if so how do I turn it off? It was a gift boug
-
No cursor in address bar after opening a new tab on full screen mode
Hello all! When opening a new tab in full screen mode, I noticed that the cursor dissappears from the address bar. Since I cannot write the address without clicking the bar, I think this is a very annoying issue... Does anyone have the same problem?
-
my dvd player is not working
-
hi , this is my first post ive the same problem also my speed dropped from around 7 meg to just under 2 meg about 6 weeks ago , rang bt [ india] who were no help at all and told me my line was fine, just before i cancelled my braoadband i
-
NONE of my apple software can connect to internet!
Hi, I am connected to my internet, but all of the Apple software ( itunes, safari, iphoto, check for updates and anything related to apple ) can't connect to internet!!! im writing this from firefox, what can I do?!!!!!!! PLEASE HELP ME!!!!!!!!!!!!!!