I keep getting msvcp110.dll is missing

I keep getting and error message when I try to open the app after download

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Similar Messages

I have had i-tunes for years but on resent version update i keep getting MSVCR80.dll is missing and i cannot use or update itunes at all

i keep getting MSCR80.dll is missing when trying to use or updaste itunes

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99765)

TS1424 re installed itunes over and over and keep getting MSVCR80.dll is missing ,, Or verify that you have sufficient priviledges to start system service apple mobile device.. and thenError 7 windows error 126 what do i do?

\I have uninstalled ITunes,,and re installed it nwo prob a doz times,, If i do not get a MSVCR80.dll is missing ,, then it seems to install only to have I tunes say it was not installed correctly and error msg 7 windows error 126,,what do i do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99575)

I-Tunes won't load. Getting MSVCR80.dLL is missing

I-Tunes has stopped loading on my lap top windows 7 after trying to upgrade to I-Tunes 11.1. Keep getting MSVCR80.dLL is missing. The windows box says APSDaemov.exe system error

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Keep getting ITunes not installed missing MSVCR80.dll?

keep getting ITunes not installed missing MSVCR80.dll?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

I keep getting avfoundationcd.dll not installed, I have diconnectied my anitvirus and firewall stil get the error cna apple give an answer to this?

I keep getting avfoundationcf.dll missing when trying to update to the latest i-tunes, had no problems till I tried to update to the 11.1.1, I am running Windowas 8 64 bit, I have tried truning off my antivirus program and usinf REVO unistall and nothing works! Does Apple or anyone who knows exactally what this is caused by and how to correct it? I have lost over 600 albums by installing and uninstalling. Please help

Hey stevenr10,
Sounds like you're taking the right steps to troubleshoot the issue, but there are a few more recommended steps in this article that are worth a shot:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Welcome to Apple Support Communities!
Regards,
Delgadoh

I keep getting the error message "Missing PDFMaker files. Do you want to run the installer in repair mode"

I keep getting the error message "Missing PDFMaker files Do you want to run the installer in repair mode"when I try to convert a file into a pdf. I have tried uninstalling then reinstalling but I continue to get the message. I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.

Hey Suzanne,
Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
Have you tried using Print to PDF option from the File menu for the same?
Please check and then let me know.
Regards,
Anubha

I am trying to open Premiere Elements but get 'CoreVideo.dll is missing' and 'Core Audio Toolbox.dll is missing'. Suggests reinstalling programme - have done that but still get these messages.

I am trying to open Premiere Elements but get 'CoreVideo.dll is missing' and 'Core Audio Toolbox.dll is missing'. Suggests reinstalling programme - have done that but still get these messages.

update your graphics card drivers.
if that fails, reset your preferences.

HT1349 i have itunes on my windows xp computer. i keep getting cd registrysettings are missing. i updated my itunes program on site and in my control panel. twice and it still comes up when i open itunes. any ideas?

i have i tunes installed on my windows xp computer. i keep getting cd regsitry settings missing. i have downloaded latest itunes and repaired thru control panel twice. i'm still getting this message when i open itunes. any ideas?

Hi
This forum is for XServes and Servers so your question is not really appropriate. You'd stand more chance of a response if you posted in the correct forum:
https://discussions.apple.com/community/itunes
The main page for all the forums is here:
https://discussions.apple.com/index.jspa
Consult this carefully before deciding which forum is most appropriate for your question.
Sounds like a major problem with your PC.
HTH?
Tony

HT1923 Hi I have tried in upgrade to latest Itunes version but I keep getting MSVCR80.dll missing notification whats all this about?/ & how do I overcome it

I have tried installing new version of itunes on my pc (windows 7 64 bit) but I keep getting an message saying MSVCR80.dll missing. Can amyone tell me how to resolve this please?

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

Hi, I'm trying to install CC on my new 13" Macbook Pro Retina and I keep getting a damaged or missing error?

Why do I keep getting an error message when trying to install CC on my new Macbook Pro 13" retina? Keeps saying it is missing or damaged. I have a membership and have already installed the program on another computer - iMac.

Close all Adobe applications and Quit Creative Cloud desktop application .
1) Right click on Finder icon and select "Go-ToFolder " option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename folders named AAMUpdater and OOBE to AAMUpdater-oldand OOBEold.
Then launch Creative Cloud app and check.

CS6 Error: Program can't start because MSVCP110.dll is missing--etc.

Ref. Win-7 64 / CS-6 64
Just got this error "out of the blue" this evening.   I tried reinstalling Photoshop but it didn't fix the problem.
I do a C: Drive backup monthly, and can revert to it, b ut I'd like to know what caused it, and how to prevent it happening again.
Regards,
Leigh

My situation is/was rather "weird".    I was in Canon DPP, selected a raw file, selected Tools/Send to Photoshop, which converts the file to a TIF & sends it to PS---& will Open PS if it's not already open.
That's when I got the Warning; however Photoshop did open, and I noticed that the Google/NIK Collection was missing from the Filter drop-down, & the Automate listing.
Also, I could only close the Warning dialog or Photoshop with Taskmaster.
I went on-line & got the advice to reinstall Visual C ++ 2010 Redistributable, but it wouldn't install "stating" that I had a later version; so' I downloaded the 2013 version, & it stated that it couldn't install because it was the wrong Platform.
I "had enough", so I went to a 10-06-"13 Paragon back-up, and Photoshop opened fine, the NIK filters were back; so I decided to locate the MSVCP110.dll & copy it to a temp folder for future reinstallation if needed,
but that dll was not in either the System 32, or SysWOW64 folders. The closest was MSVCP100 which was in both.   So, since that dll was not on the back-up, it hadn't been there to begin with???
I did the back-up restore" late" in the early AM, & though I opened a "test" image in Photoshop, I didn't try any of the NIK filters; but the the fact that they were missing from the filter menu at the time of the Warning certainly "points the finger" at NIK being the cause.
So-ooo---What to do now????

Trying to open I tunes but keeps saying msvcr80.dll is missing

Trying to open I tunes but keeps saying msvcr80.dll is missing

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1349 Help I try to download the latest Itune 10.7 with problems I can't get back on Itune it keep saying MSVCR80.dll is missing?

I got an update from Apple Itunes for update I tune I try to download which I did but when I try to go to my Itune Library I can't go in statment of MSVCR.dii is missing and I have to go back and down Itunes again . So some guide me to what is going on I don't have a Apple computer It an HP TouchSmart Series PC

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

When down loading new version i keep getting MSVCR80.dll not found and I now have no itunes

I have just up dated my i tunes and whenever i try to start it i get this essage : MSVCR80.dll not found and itunes refuses to open. i have tried re-installing etc but nothing works. Any ideas?
muzz

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I keep getting msvcp110.dll is missing

Similar Messages

Maybe you are looking for