I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.
Similar Messages
-
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
When i try to use time Machine for my backup i get this message: The backup disk image "volume/data/AnnePrybyla's imac.sparsebundle is already in use. What can i do
Look over to the right of this page under the heading of More Like This for multiple answers and solutions to this bug.
-
My time capsule stopped backing up and the following error message popped up, The backup disk image "/Volumes/Data/iMac.sparsebundle" is already in use.
Any ideas how to troubleshoot?Have a look here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
I have restarted my computer, but still getting the same message.
Pull the power plug from the back of the Time Capsule, or pull the AC wall plug, whichever is easier
Wait a full minute
Power up the Time Capsule
This simple reset will fix the Mountain Lion bug about 95% of the time.
If not, see #C12 in Pondini's Time Machine --- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html -
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use."
Can anyone assist me in correcting the problem causing this? Thanks.Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup -
i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?
See Pondini's TM FAQs, for starters.
-
"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas pleaseThanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help -
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html -
I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.
Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.
-
How do I fix this message from time machine: The backup disk image “/Volumes/Data/Jim Linnell’s Computer.sparsebundle” is already in use.
Restart the computer and your Time Machine backup system.
See also from More Like This:
what do I do about this time machine error message? The backup disk image “/Volumes/Data/Paul Brandow’s Computer.sparsebundle” is already in use.
Time Machine gives following error message;- The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use. What does it mean? -
I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it.
Maybe you are looking for
-
Dear All, Whenever I run Transaction STMS and select the quality system, It is asking password in order to see the requests. Whenever I provide the password, then I can see the request numbers but I cannot see the short text maintained for that. But
-
Creative Mediasource not detecting Zen To
Hi Just reinstalled windows'but can't find my Zen Touch CD anywhere. The only software i ever use is the Creative Mediasource to transfer my MP3's onto the Player. I went to Creatives Website and downloaded the Mediasource which is there V3.30.2. It
-
I am required to trigger billing output to at item level (normally SAP
I am required to trigger billing output at item level which means one billing document sends more than one billing output for each line item (normally SAP does it at header level ).How do I go about this? Is there any user exit I can manipulate to t
-
How to pass src value into img tag in ADF
Hi, My Dev : 11.1.2.3.0 How to pass row values into <img> tag.,I used the below code but it's taking empty., I tried both ways like #{row.CdFilePath} and ${row.CdFilePath} <af:iterator var="row" value="#{bindings.xxx.collectionM
-
Dear Skype It appears that my niece has been 'playing' on my MacBook. When I open skype it automatically opens on her skype page and there seems to be no way to delete hers or to get to mine. I have tried moving everything to do with skype to trash,