I know it's a little late but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play my music. It will play spotify and YouTube music but not my music. Everything else works fine but when I go to play a song it just skips to the next. Why
I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Similar Messages
-
I updated my iPod Touch 4th gen. with ios 5 and all my apps and music disappeared. What to do?
This afternoon I updated my iPod Touch 4th generation with the iOS 5 update. I left the computer alone for about an hour, since that is how long iTunes said the update would take. When I came back, all of my music and apps were gone. Why did this happen? Is there any way to fix it? Thanks for the help.
- If in the USA you can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- You can always redownload apps at no additional cost as long as you are signed into the same iTunes account the orignally purchased them.
- It appears that the apps and music were not in the iTunes library on the computer on which you performed the update. Music and the apps themselfes (app data is in the backup) are not part of the bckup hat iTunes makes as the first step of the uPdate. Apps and music are synced from your iTunes library during a latter part of the update process. -
I can't get the IOS 5 to work for windows Vista. I'm running kaspersky pure 2.0, windows firewall and windows defender. I have turned them all off, I then attach my Ipod 4th gen and I get the "cannot connect to itunes update server". I ran diagnostics in itunes and it tells me I dont have a internet connection. I'm on the internet right now, and I DO have a internet connection, but it tells me Itunes says otherwise. I'm able to send this message on the same pc with internet connection but keep running into this error. I have now read discussiong boards through apple and disabled all my firewalls, still no luck. I was able to update the lates version of itunes, and just waiting to get my ipod updated now, please help me.
On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/ -
My new ipod touch 4th gen with ios 6 wont play soun in the headphones, but only through the speaker when my head phones are unplugged
- You do have the volume set all the way up?
- Have you tried another pair of headphones/do the headphone work in other devices?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the headphone plug a dozen times or so.
Try the following to rule out a software problem:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Make an appointment at the Genius Bar of an Apple store. It seems yo have a hardware problem, likely a bad headphone jack.
Apple Retail Store - Genius Bar -
I updated my ipod touch 5th gen to iOS 8.2 and left it but when I got back it was in recovery mode with a red iTunes logo and I plugged it into my computer to reset my ipod and it wouldn't do it what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i recently updated my ipod touch 4th generation to version 6.1 and it's awful it didn't restore my music, videos or any of my apps.!!!! it only restored my photos and that's it! im also noticing that it updated as if it was an iphone. help!!!
The iPod backup that iTunes makes does not inlcuded synced media like apps and music. If that media is not in the iTunes library then it is gone after the update/restore.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
i just updated my ipod touch 4th generation to iOS 6 but there seems to be a problem when i go to the app store, it always crash, what could be the problem? thanks
Try quitting the app out of your multitasking bar, and then resetting (hold power an home buttons til device shuts off and comes back on).
-
My Ipod Touch 4th gen is iOS 6.1.3,I have used Imessage and facetime lots before, but it disconected and wont let me verify it at all.
Please help as I cant contact my friends.Maybe:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
iOS: Troubleshooting FaceTime and iMessage activation -
ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes
Hello,
This will fix your problem!
To put the device in DFU mode,
1. Connect the device to iTunes
2. Hold both the power button and the home button down simultaneously
3. After 10 seconds, release the power button but leave the home button pressed
4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
That should get you back on your way.
~Lt. Leviathan -
Why is it siri and panorama is not available in the ipod touch 4th gen in iOS update
why is it siri and panorama is not available in the ipod touch 4th gen in iOS update
Because the hardware does not support them.
-
I tried to update my ipod touch 4 gen and it automatically shutoff and said connect to itunes on the screen. I did. it says it found an error restoring ipod, what do i do now to resttore my ipod back to working and functioning condition?
Hi marty292,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy -
Updated iPod touch (4th gen) to iOS 6 and iMessage won't work.
This morning I upgraded my 4th generation iPod touch to the new iOS 6, since then everything has worked fine except for iMessage. I went out to a few places with wifi and iMessage worked just fine, got back home and back on my wifi and it no longer worked. Any ideas on what I can do to fix this? Apparently my iMessage will only work on every wifi network but my own now since the update. Any ideas are appreciated...I am beyond frustrated at this point.
I have been having the same problem. My iMessage will work every now and then but the majority of the time it does not. I have restored my iPod twice and I am still having the same problem.
-
Ipod Touch 4th Gen with iOS 6 syncs but music library does not. Why?
Hello all. Everything else on the iPod (that I have used) is working fine.
I have tried restarting my computer, iTunes, iPod, re-routing the directory and syncing again. Nothing has worked. I have even tried selecting only certain artists and nothing. I am about to revert back to the old iOS on my iPod, but before I do, does anyone have any suggestions?
Thanks for your time!- You do have the volume set all the way up?
- Have you tried another pair of headphones/do the headphone work in other devices?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the headphone plug a dozen times or so.
Try the following to rule out a software problem:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Make an appointment at the Genius Bar of an Apple store. It seems yo have a hardware problem, likely a bad headphone jack.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I want to store date in the format 2000-09-05 12:18:52 I have changed the NLS_DATE_FORMAT variable in the init.ora file. But still i get an exception i.e. java.sql.SQLException: ORA-01861: literal does not match format string Is there any other prope
-
Hello, We have ComponentWorks for VB, version 2.0.1. It works fine on the Win2000 system. We are trying to move to XP system. The installation went OK. However, when trying to open an existing project that uses the cwutils.dll, it can't be found
-
Hi All, I have 7.0 Template. now I want to make changes in the Navigation Block item.What i want to do is, I want to see more than 1 characteristic in a row in the navigation block in the report. Can anybody help me change this? I know it is possible
-
Plus sign instead of data in form
I have begun using the Form feature in Adobe 8.0. I have made my forms using the Livecycle designer. I have received back completed forms via email and then I have entered the data in the actual form itself by hitting "import data." When doing so I'v
-
Hi Guys! I just bought my mac on new years eve and was playing on Iphoto yesterday. It crashed for some reason so I turned off the mac and when I turned it on this morning to play with it again, it pops up with a message saying that 'Iphoto cannot be