I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the Cannon website for the correct driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

Similar Messages

I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site, but still no joy. Any suggestions?

I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?

aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.

I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?

I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?
I tried uninstalling the plug ins and installing Reader based on advice in another post but it didn't work.

What's your system? windows?
[url deleted by host]
Message was edited by: Michael.lu [url deleted by host]
Message was edited by: Michael Kazlow

I upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work. i get an error message "temporarily unavailable". has anyone found a solution to be able to listen to podcasts? thanks

i upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work. i get an error message "temporarily unavailable". has anyone found a solution to be able to listen to podcasts? thanks

I have the same problem, but don't expect Apple to help! I rang their help line and explained the situation and that the same experience is reported all over their forum and they would not assist unless I paid for a one year help subsciption.
This company has lost the plot! They create software that universally will not work then expect customers to pay to have it fixed. Technically I should walk straight into the nearest apple shop and ask for a refund, as the device is no longer fit for purpose!
Congratulations Apple for the best ant-promotional App on the market and your astounding lack of service ethos.

After installing new itunes version why would I have to restore my ipad to factory settings and now it is doing nothing. itunes won't work ?

After installing new itunes version why would I have to restore my ipad to factory settings and now it is doing nothing. itunes won't work ?

Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??

HT3258 Upgraded to Lion and now I can't get my monitor to work

I just upgraded to Lion and now I can't connect to my Dell monitor. I am using a MacAir. I have tried chaning the input. But that didn't work. Any suggestions?

That was a widely publicized fact, it is a good idea to always check compatibility before upgrading. Your options are to go back to SL or find another app.

Loaded Creative Suite and now my Final Cut Express HD won't start up

Loaded Creative Suite on my iMAC 20" and now my Final Cut Express HD won't start up. It wants to load but i only see it for a few seconds then it disappears.
Is this a scratch disk problem or did CS do this.
HELP !!!!!!!!

Welcome to the discussions,
to repair permissions close all open applications go - utilities - disk utility - select macintosh HD, then click 'repair permissions' - and wait. The shutdown and re-start.
You need to supply more details about your operating system and hardware in your profile to help us to describe your method for trashing your prefs but check this out:
http://discussions.apple.com/thread.jspa?messageID=3800327&#3800327
or this which primarily deals with fcp but introduces fcp/fce rescue and other useful info:
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
also, is your software up to date? Run software update from the apple menu, repairing permissions before and after.
To log into a different account and try launching FCE from there go to system preferences - accounts - and add a new user. Log into the new account and try to launch fce.
Ideally, it will help you to use the search function in these forums which can point you in the right direction before needing to post a question which may have come up in discussion before.
Good luck and post back to let us know if you've had any success.
Dave

Canon MX 860 scanner won't work after installing Mt Lion

After upgrading my IMac to Mountain Lion v 10.8 my wireless Canon MX 860 scanner function won't work. The printer works. When I try to start the scanner either from the keyboard or the scanner I get an error message: MP Navigator EXquit unexpectedly.
I downloaded and reinstalled the scanner driver
mac-mx860-14_11_4a-ea8_2-1.dmg
and restarted and it still doesn't work.
any other suggestions?
thank you

You may also need to update MP Navigator to v2.1.3. If you are using an older version then trash that version before installing the latest version.

Just did a software update and now iTunes or other Mac accessories won't work?

I did a software update for my Macbook and now iTunes, iPhoto, iMovie, iDVD and iWeb won't work. I keep getting the iTunes quit unexpectedly thing and it sends the report to Apple. Is there anything I can do to fix this???

Download the 10.6.8 combo release from the Apple download site. Use Disk Utility (on your hard drive in applications/utilities) to repair permissions, then apply the combo release, then repair permissions again. That sometimes fixes odd system errors after a Software Update.

So lately I decided I was tired of Tiger, and decided I would upgrade to Leopard. Well I made the mistake of erasing the hard drive before I made sure it would work. Well now like the installer was before it failed. And now when I boot it just won't work

So lately I decided I was tired of Tiger, and decided I would upgrade to Leopard. Well I made the mistake of erasing the hard drive before I made sure it would work. Well now like the installer was before it failed. And now when I boot I get the normal finder/question mark flashing folder. I also found a power Mac g4 that needs a new operating system. It's running 9.2. It's going to my grandma as a gift. I really need help.

I think you'll need to find a Retail 10.5 Disc.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

Installed Mac OS 10.9.2 software, Canon MP 240 Scanner Won't Work

I installed the Mac software update to my MacPro laptop. My Cannon MP 240 print function works fine, but the scanner software gives me error messages no matter how many times I've reinstalled drivers. Any suggestions on how to get the scanning function including saving as a pdf function to work again. Thanks.
NancyCK

NancyCK wrote:
I'm trying to use the Canon's MP Navigator scanning application.
To use MP Navigator you must have the MP240 scanner driver installed. To check if this scanner driver has installed, open Finder and select Go > Go to Folder and enter /Library/Image Capture/TWAIN Data Sources then press Go. With the TWAIN Data Sources folder open, do you see a file called Canon MP240 series.ds. If not, then install the scanner driver linked to above.
NancyCK wrote:
I can scan from system preferences, but can't save and use for other purposes. Any recommendations on how to scan from System Preferences and then save as a pdf document?
This sounds like you have a permissions problem. Open Disk Utility, select your Mavericks partition and click on Repair Disk Permissions. When this has completed see if you can scan.
You could also try opening Image Capture and with the Show Details view selected, see what folder it is being scanned to and if that fails, then see if you can scan to a different folder.
And via Image Capture you also have the option to save the document as a PDF.

I just updated to mountain lion and now pandora won't work, videos won't work, i can't access my iTunes.... the list goes on. HELP!

I recently updated to mountain lion and many of my most used programs won't work....
pandora
itunes
hulu
any vidoes.... says pop up blocked
somehow I can't change any of my security preferences
SUPER FRUSTRATING

So what happens if you go to System Preferences > Security & Privacy > General? Are you able to go there at all? If you are able to go there, can you unlock the preferences using the lock in the lower left and your login name and password?
If you are able to do this, can you change the "Allow applications downloaded from:" to Anywhere?
Best of luck.

I upgrade to Lion and now my Mail does not open, who can help me out?!

I upgrade to Lion and now my Mail does not open, who can help me out?!

I cannot get to the mail menu bar. When I try to open mail, I get "you can't use this version of mail with this version of Mac OS X. But the help suggestions don't work either. I am trying to download an update combo v1.1 to see if that helps. Thanks

I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
Cancell both downloads anyway.
Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed, Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
Only update were it say's check for updates, not download now.

Hi, I upgraded to OX X Mountain Lion, and now I can't upload any pictures from iphoto/desktop to email, etc. After I choose my file and hit "attach file" to upload, it says: "Invalid File Specified". I am using jpg, so I'm confused. Any suggestions?

Hi, I recently upgraded to OX X Mountain Lion, and now I cannot upload any of my pictures from iphoto or even my desktop to email, etc. After I choose my file and hit "attach file" to upload, it says: "Invalid File Specified". I am using jpg, so I'm confused. Any suggestions?

Not having a media card in your BlackBerry may affect your ability to transfer media files onto it. There is a file size limit of 2.86MB when transferring files into device memory. http://bbry.lv/9XNuy0
Have you verified that the applications you are trying to install are supported by your current wireless provider? Unlocked devices from one provider may not have full functionality on another network.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

Similar Messages

Maybe you are looking for