I lost my ipod touch when i moved flats and i just found it in one of the boxes after 4months and now its asking me to "connect to itunes" but itunes doesnt recognize it because i have a passcode and its asking me to enter it. HEEEEELP please.
I lost my ipod touch when i moved flats and i just found it in one of the boxes after 4months and now its asking me to "connect to itunes" but itunes doesnt recognize it because i have a passcode and its asking me to enter it. HEEEEELP please
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
How can I copy my music files to my iPAD. The CDs are currently stored in folders on my PC. Note: Synching via iCLOUD won't work because I have VISTA OS and I need at least Windows 7 or 8.
Hi ladextr,
Thanks for using Apple Support Communities. To sync your music to your iPad, first put your music in iTunes as described here:
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Adding content on your computer to iTunes
iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
Open iTunes
From the File menu, choose one of the following choices:
MacAdd to Library
Windows
Add File to Library
Add Folder to Library
Navigate to and select the file or folder that you want to add
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
Once that's done, you can sync the music to your iPad by following this article:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Cheers,
- Ari -
for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.
It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
Set you phone up as a new device and start over. -
my niece's touch is disabled due to a child trying to unlock it too many times. we connected it to itunes but it asks to unlock it. we cant even access the passcode screen to try to unlock it. it locked up months ago and has been abel to use it and she dont knoe the password to her email account to receive communication from itunes or apple so we esstablished a new account but cant connect hte device to the aplle id account. any suggestions?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen -
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload midway and am afraid it 'crashed'
Try putting it into recovery mode.
Connect iPad to your computer via USB while it's turned on.
Open iTunes
Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
Power off the iPad completely (wait for the progress spinner to disappear).
Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
Click on the "Restore" button and the process will begin. -
i Ave been to apple tody and got my iPhone 5 replaced only to find I can't activate it? I have tried turning it on and off and plugging into iTunes still nothing ..it just gives me can't activate server unavailable? Anyone help me please
Did you check the security software on your computer?
Resolve issues between iTunes and security software - Apple Support
You can also go back to the Apple Store and let them activate the phone. -
I lost my ipod touch which is not protected by a password, how to remove email info?
Hi,
I lost my ipod touch which is not protected by a password. How can I prevent the new 'owner' to have access to my email? I changed my email password already, but I'm wondering if one can still have access to the email without entering the new password, (it is the case with my new phone, nexus5), since the mail app automatically syncs with my email...
Thanks
CarmenDid you have Find My iPhone turned on on the device?
If so, go to https://www.icloud.com/ and go to Find My iPhone. Click on the iPod, and even if it is no online, set it to Lost Mode. You can lock it and put a message on it. Once it comes back online, it will be locked.
Cheers,
GB -
My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have lost my ipod touch but i have locked it is there a way to access the data inside?
I lost my ipod touch, but i have locked it, is there a way that others one can access my data.?
No, they cannot. The only way for them to bypass the passcode is to restore it as new in iTunes, and that would erase all of your data.
-
i own a ipod touch and a ipad2g but i lost my ipod touch and downloaded the find iphone app on my ipad and when i opened the app my ipod touch wasnt even listed on it as one of my products but i use the same apple id for all of my products??!! Please Help
Ive never used that but I think there is a find ipod app. But im not sure. The ipod might have had to have it on?
-
I lost my iPod touch and bought a new one? Is there a way to transfer all the songs I have in iTunes onto the new iPod? I am scared I will lose it all when I sync the new one or that I have to start all over. Please help!!
You can do better than that. You can click on the Restore button that appears under your device in iTunes. This will restore your iPod to factory settings as if it were fresh out of the box. But don't worry. By doing a restore, you will then be given the option to "Restore from Backup." This will allow you to restore the state of your previous iPod!!
-
I have lost my iPod touch however it was not connected to wifi network , how do i find it . A reply would be very appreciated
you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
my touch screen is broken and i need to back my files up but it wont let me connect to itunes because i have a passcode on my phone which i cant enter because my screen is broke
Bummer. Hope you've been backing up to iCloud so you can restore your information after you get the phone replaced.
-
What to do when I lost my iPod touch?
What do I do when my daughter lost her iPod touch?
If ou turned on Settings > iCloud > Find My before it was lost, login to our iCloud account, click Find My Phone and see if it shows up.
To show Find My must have been turned on, it must be powered p, and it must be connected to the Internet. Without all of those you will not be able to find it.
Maybe you are looking for
-
Using a central itunes library
I operate a Macpro with the itunes library resident on its local harddrive. I also use an apple tv and a airport connection to a stereo. I use a timecapsule wireless router with a WD network drive hanging off the time capsule. Is there a way to have
-
Re: "serious error" message when starting cs6
Hi Everyone, I currently can't start cs6 6.0.5 on my MacBook Pro running 10.7.5 with 4 GB memory. I get the serious error message and then it shuts down. This also happened before I upgraded to 6.0.5 and then it worked fine for a couple months. Then,
-
How to stop Windows phone 8.1 app from crashing?
Hi All, I have developed an app in Windows Phone 8.1 environment (WinRT). When i tested the app in my local testing device, it worked fine but when i hosted the app on app store, it sometimes crashes. Please help me, how do i stop my app from crashin
-
After Quicktime 7.6 update, can't load i-tunes, logic or quicktime
Hello everyone. Would really appreciate some help here. I'm running a macbook pro (OS 10.4.11, Logic Pro 7.2.3) In order to view some video files for a project I'm working on, I updated quicktime to 7.6.4, the latest Tiger will run (according to the
-
VI Fails to send queue elements
I am trying to use a queue to send data from my pulse train subVI to my main VI. After my pulse train completes, I send a TRUE boolean via the 'Enqueue element' which goes to the 'Obtain Queue' and then to the Dequeue Element to acquire and log data.