I'm a newer in using Datasocket,now I want to send data from DAQ(6052E) to another computer B,

I have two types data,so Datasocket write string
vector.vi and Datasocket write double vector.vi are used in my application,but in computer B my programm always reports "Not permitted to creat new item (0*80004005) ",Datasocket read double
vector can recieve data properly. What should I
do?

Most probably the permission settings are not correct. Launch "DataSocket Server Manager" on the server side and add computer B IP address under "DefaultReaders" and under "DefaultWriter".
I usually like to have "everyone" as reader and write to solve such problems if security is not a big concern. That way i don't have to change the setting everytime new machine wants to read/write.
hope this helps
A Rafiq
National Instruments
http://www.ni.com/ask

Similar Messages

Can I send data from a PC to another PC using Data Socket Servers?

I need to send an array to a computer. Both computers use LabVIEW. The computer that writes the information also runs the Data Socket Server. What I want to do is read that array from another computer via internet. So the main issue is: Can I read from a Data Socket Server via internet?
I'm writting the array using the dstp where I'm supposed to type the URL.

Integrating the Internet into Your Measurement System – DataSocket™ Technical Overview
Found using a simple search.

How Can I Send Data From One Pc To Another Using An Ethernet Connection ?

Hi,
I would Like to know how to send data ( For example, any String ) from a Server Pc to a Client Pc, Using the same java program installed on both computers.
[Pc One ( Server ) [ Java Program] ] <----Ethernet--Cable----> [Pc Two( Client ) [ Java Program] ]
Thanks .
Edited by: jaysal2490 on Jul 7, 2008 9:45 PM
Edited by: jaysal2490 on Jul 7, 2008 9:46 PM
Edited by: jaysal2490 on Jul 7, 2008 9:51 PM

Check out this tutorial:
http://java.sun.com/docs/books/tutorial/networking/sockets/index.html
There are code samples included.

Using remote enabled rfcs can we send data from one system to other..

or do can we do this only b/w twp sap systems.
why do we use bapis then.
wat is its difference b/w rfc and bapi.

Hi Jaya Krishna,
RFC's can be accessed from non SAP systems also.
Technically BAPIs are RFcs Function modules only.
The only differenece is the business utility of them. The BAPIs have a standard Business functionality attached to them, like creation of an Order, Changing a Purchase document etc, Where as normal RFC function modules may or may not have a specific business functionality attached to them.
Regards,
Ravi

How to transfer DATA from one machine to another using DBlink

I want to transfer data from one machine to another both having oracle 8.0.5 with AIX operating system using DB link. CAn any one help me in this task

Step one - Create and test SQLNet connections between the databases.
Step two - Create at least on database like from one database to the other:
CREATE DATABASE LINK linkname
CONNECT TO user identified by password
USING 'tnsnamesentry';
Step three - use the dblink linkname in dml statements eg:
insert into emp@linkname
(select * from emp);

I just bought a new macbook air. Now i want to sync my iphone to this computer. I copied all my songs and apps to the itunes. If I sync do i loose all my contacts and notes? because i could not copy it to itunes

I just bought a new macbook air. Now i want to sync my iphone to this computer. I copied all my songs and apps to the itunes. If I sync do i loose all my contacts and notes? because i could not copy it to itunes

You need to use the backup of your PC to transfer all the music files to iTunes on the Mac.
If you have no backup then you have a difficult task ahead of you as iTunes will only allow you to sync purchased music from the iPhone back into iTunes. Any music you loaded into iTunes yourself will not transfer from the iPhone to iTunes, this is to prevent stealing of music. To sync iTunes purchased music from the iPhone to iTunes, connect the iPhone and open iTunes, but when asked do NOT sync the device. then right click on the iPhone in the iTunes source list and select the 'Transfer Purchases' option, you will also find this commend in the File menu.
If you are in the US, you can use the new iTunes in the Could feature to redownload your iTunes purchased music / apps / books for free.
If you want to transfer all the content from your iPhone to you Mac then you will need to use Google to find a 3rd party piece of software that will do this for you.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I just bought a brand new iPhone 4s from a Three store. When I used the cloud restore to put the data from my old 3gs onto the device, it's prompting me for an Apple ID login with an email address that isn't mine!

I just got a brand new iPhone 4S on a contract from my local Three store. When I used the cloud restore to put the data from my old 3GS onto the device, it's prompting me for an Apple ID login with an email address (hotmail) that isn't mine! My old phone has NEVER had any Apple ID other than mine log into it, and the new one's a sealed box that I've opened and set up from scratch. Can anyone please explain this? I'm worried there's some kind of problem with my iCloud data being mixed with someone else's or something... Since I logged in with my own ID, it's downloaded the data perfectly fine, but I just got the Apple ID prompt again a moment ago with this same hotmail address in it... I'd be very grateful for any explanation!

In iTunes on your computer, select the Purchased section under STORE in the left column. Click on the first track and choose "Get Info" from the "File" menu.
In the "Summary" tab you'll see details of the purchaser of the track. Click Next to go through all your purchased music one by one until you find the ones you need to get rid of.
Unfortunately, there are no smart playlist rules that can filter tracks by the purchaser that I know of.

I have a sync account and used to keep sync with firefox server. Now computer got re-installed and want to sync data from firefox sync server. But I am unable to setup as i dont have sync key.

I have a sync account and used to keep sync with Firefox server. Now computer got re-installed(OS) and want to sync data from Firefox sync server. But I am unable to setup as i don't have sync key.
I would like to just sync with Firefox Sync Server with existing account. I can not find any way out for this. please reply me on
[email protected]

hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...

HT204022 I backed my old iphone up to my computer and bought a new iphone. When i backed my new phone up I now I have an icloud photo (from my computer) album that I want to delete from my phone but I do not have the option. Please help.

I backed my old iphone up to my computer and bought a new iphone. When i backed my new phone up I now I have an icloud photo (from my computer) album that I want to delete from my phone but I do not have the option. Please help.

If the album was synced to your phone from your computer, it can only be removed by sycing it off. To do this, deselect the folder on the Photos tab of your iTunes sync settings and sync.

I'm new to the LabView. How do I pass data from VI configured using Serial (CMTS using CLI commands to set Parameters ) to VI configured using GPIB(vector signal analyzer ) to measure such as RF frequency or power on the instrument? Thanks

I'm new to the LabView. How do I pass data from VI configured using Serial (CMTS using CLI commands to set Parameters ) to VI configured using GPIB(vector signal analyzer ) to measure such as RF frequency or power on the instrument?
I just want to set something on the front panel that will execute the Serial parameters first and then pass these settings to vector signal analyzer
Thanks
Phong

You transfer data with wires.
Frankly, I'm a little confused by your question. I can't think of any reason why you would want to pass serial parameters (i.e. baud rate, parity) to a GPIB instrument. Please explain with further detail and attach the code.

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

HT5312 I forgot the security questions and also the password for security info email of my apple id. Now I want to change the security info email with another. What Should I do?

I forgot the security questions and also the password (and even account id, sequrity questions,... becouse I didn't use for a long time) for security info email of my apple id. Now I want to change the security info email with another. What Should I do?

Even if I'm not despertate, creating a new Id is good Idia. But I think I must create another email address also since I can't use the first email adress as an apple id for the new one. That means I should check everyday the new email address also, that is making life complex. Better to try the 1st solution. Thank you very much.

Monitoring using a Dashboard - How do you extract data from different fields?

I have a situation where a Dashboard needs to be made to monitor the state of different SAP systems.
Within individual Systems I know its easy to monitor the systems using CCMS (rz20), but my question is, How do you get to pull out the data that is displaying on the CCMS screen so that it could be taken and displayed on a dashboard. A dashboard could be a JAVA program that displays data from various such fields and displays maybe on a TV screen.
What I found so far was,
in rz20
Click on Performance Overview.
click on CPU Utilization
So, I place my mouse pointer on Value '2' for User CPU Utilization and hit F1 and then click on Technical Details
Now even if I place my mouse pointer on Value '1'' for User CPU Utilization and hit F1 and then click on Technical Details I get the same screen as above.
So, My question is, How do we determine what data sits in what field?
The aim again is to read these data and populate an external Dashboard.
The current Systems are not connected to SolMan as we do not have a SolMan setup yet. I am just trying to make a Dashboard using the existing CCMS tool.
Any thoughts or suggestions would be greatly appreciated.
Regards,
Bevin

Hello Bevin,
There are other transactions : ST06N/OS07N to check performance data, see note:
#371023 - OS07/ST06: Monitoring operating system data
#1084019 - OS07N: New operating system monitor
All CCMS agents can copy data from the SAPOSCOL shared memory segment to the CCMS monitoring segment and transfer it to a central
monitoring system. This means that the data is visible in the CCMS monitoring architecture and is displayed both in the familiar transactions ST06
and OS07 and in the Alert Monitor (transaction RZ20)
Operating System Collector SAPOSCOL:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/c4/3a6bff505211d189550000e829fbbd/frameset.htmk
Kind regards,
Tamas Istenes SAP Support Engineer
AGS Primary Support, Global Support Center Hungary

How to load data from one Infocube to another request by request using DTP

Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
Ravi

You cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set.

I'm a newer in using Datasocket,now I want to send data from DAQ(6052E) to another computer B,

Similar Messages

Maybe you are looking for