I'm already connected to the tv but no sound?????
I got the adapter and the s-video cord so the tv is hooked up to the macbook and i get a good connection but the sound still comes out of my macbook and not my tv... How do i get the sound to come out of my tv instead?
You need one of the following for audio depending on the audio in for your TV. Most have the RCA jacks.
3.5mm patch cable
3.5mm to RCA Stereo Cable
Similar Messages
-
When trying to install downloaded software I am prompted to connect to the internet but I am already connected. This also occurs when trying to install an Adobe update.
A cable modem always needs a complete reset whenever you change the device that it is connected to.
To get your Internet signal restored, it will require at least one major step including the reset of your modem and complete network power cycle.
If that is not successful, the second major step is to reset the AirPort Extrreme back to factory defaults and then combine the steps above again.
Try this first:
Push the reset button on the cable modem (if present) and pull the internal batter (if easily accessible) then power off the modem
Power off everything else on your network....all devices....order is not important
Wait at least 20 minutes...longer will not hurt
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots or world icon) on the AirPort Extreme
Re-install the modem battery if it was pulled in the step above
Power up the modem and let it run for 4-5 minutes by itself
Power up the AirPort Extreme and let it run for 4-5 minutes
Power up each other network device one at a time about a minute apart until everything is powered back up
Check the network for proper operation -
Actually I want to restore my iphone from my mac but I can't because it says "go to icloud settings on your iphone and turn off find my iphone before restore your iphone". Then, I go to icloud.com and erase find my iphone. But I still can't restore my iphone because it says pending to erase your iphone until your iphone connected to the internet. My iphone already connected to the internet and it still says pending. Please help me to fix this problem because I need to restore my iphone.
Hello rxander21,
Force your iPhone into recovery-mode and then you can use iTunes to restore it.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
When sharing internet from macbook air, my phone connects to the internet but my Air cannot.
When trying to share internet to my phone from my macbook air on 10.9.4, my phone will be able to connect to the internet but my laptop won't be. Has anyone else dealt with this problem? Please let me know if I need to provide any more information. Thanks!
Try resetting your SMC.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin -
My mail account is set up properly, I can connect to the Internet, but I cannot get mail from the Mail app on my iPad.
Hello echo1946
Start with the first article to troubleshoot the issue of not getting mail on your iPad. When you get online using safari, check to see if you can log into webmail. Also keep in mind, depending on the account that mail sometimes might not come in if it is a POP account as it may have already been download elsewhere.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Mail Settings Lookup
https://ssl.apple.com/support/mail-settings-lookup/
iCloud: IMAP
http://support.apple.com/kb/PH2585
Regards,
-Norm G. -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
Adobe creative cloud say i'm not connected to the internet, but I am
adobe creative cloud says i'm not connected to the internet, but I am
If you statee more aout your set up about your relation to the Cloud a l9ittle of the history something to go on right now tht is believe it or not ptretty vague.
i do not relly particfipate in the forum but I doubt that the other users will have an easytime helping you without more informtion.
Offhand I wouuld say it was a permissions issue fwiw. -
I just restored my ipod as a new ipod. It will not let me sign in with my apple ID and says that it has a problem connecting with the server, even though I am already connected to the wifi.
Yes, of course. Did you set up with your Apple ID?
Reset the iPad to factory and set it up with your Apple ID and password. You can still sync different apps, music and other stuff onto the iPad, the devices need not mirror each other.
I have an old wifi iPad, an iPod touch and a new iPad mini with cellular. All on the same Apple ID and password, different content on some apps, same on others. -
So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
My ipod touch is connected to the wifi but when I get on safari it says "cannot open page because not connected to internet." SOMEONE PLEASE HELP!!!!
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router.
- Reset network settings on the iPod: Settings>General>Reset>Reset Network settings
- The troubleshjooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...Do you have this problem with all websites, or only some? If only some, which ones?
-
how do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??
How have you managed to get apps on your phone that are tied to a different and unknown AppleID?
If these apps were not purchased by you, having them is effectively software piracy and you should purchase them using your own AppleID if you want to keep hem. -
My ipod touch is connected to the computer but itunes is not recognizing it. help please !
My ipod touch is connected to the computer but itunes is not recognizing it. I need help please. I've tried restarting both my ipod & the computer and also unistalling itunes and loading it again, nothing is working.
Assuming you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Maybe you are looking for
-
Line with endpoints following tracked points
I have a video with two points that have been motion tracked. I want to create a line connecting these two points, with the endpoints of the line moving to match the tracked points as they move. Is there an easy way to do this?
-
Flash Builder 4.7 becomes unresponsive when trying to add 5-6 source folder under Flex build Path
Hi, I am facing issue with Flash Builder 4.7. Whenever I am trying to open any mxml or .as file after project setup, flash Builder 4.7 becomes unresponsive without showing any error message or popup. At the initial project setup, I am able to open fi
-
ISSUE Retrieve ViewRowImpl attributes using ExpressionLanguage
Hello, In my page JSPX I use a popupFetchListener to store my ROW in pageFlowScope, when I try to retrieve one of attributes I encountered this error : <font color="red"> PropertyNotFoundException The class fr.annuaire.model.views.annuaire.EdpViewRow
-
Anyone help me with adding this mixer to my Logic/Duet chain?
Hey Guys, Someone gave me this mixer: http://www.mackie.com/products/1402vlz3/ Actually it's an older version but it's basically the same thing. I have never used a mixer before in my personal recordings - and I admit I don't really know what the pur
-
Installer Wont Install Anything Made By Apple
The title is self explanitory. Updators for ANYTHING will not work. The only thing that has worked was the itunes phone driver. Installer works fine with anything NOT made by Apple. When it starts updating, it says searching for nessicary files, then