I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.
Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium
Similar Messages
-
Im getting the following error message when Time Machine is trying to back up: backup disc image/volumes/data/my computer.sprasebundle is already in use. What does this mean? How do i correct? Thanks!
90% of the time, all you need to do is power off the Time Capsule, wait a few minutes, and power it back up.
If no luck, then go to the more sophisticated fixes in the link above. -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have tried to add a hotmail account to Thunderbird because my Internet provider will stop e-mail support in the near future. I was able to add a hotmail account to Thunderbird, but I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wrong?" (The hotmail website receives the e-mail.) User name and password is certainly correct. I have a 8.1 OS. Thank you.
got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails. -
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.
Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected? -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
I get the follow error message when i try to update my Iphone on I Tunes " fireware is not capatible 2
got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails. -
I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.
Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.
Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
When attempting to install OS X Mountain Lion I get the following error message "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." Any idea what the issue might be?
Mama --
Which Mac??????
iMac, MacBook Pro, Mini,, what?
Go up to the Apple icon on the upper left hand corner of your screen (menu bar).
Click that, and then "More Info". and then "More Info" again.
What does it say? Here's what mine says: -
I get the following error message when trying to restore settings on my iphone:settings could be restored due to an unexpected error occurred (3014). anyone will be able to help please? thanks
Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!
Maybe you are looking for
-
Hi, I need to configure the free gods functionality and I look for clarification from those who have configured it . My questions are. 1) how does the system determines while creating sales order that free goods are involved. 2) for main item, if t
-
I can't move exactly the objects
I have Indesign CS5, I have turned off all the snap guides, but i still have the problem, that the program snap the objects in one place to another, so i cant put exactly each other rectangles. Here is a pic demonstrating the problem. Here i wanted t
-
HELLP WITH THIS PROGRAM...
i have to create a java program that requires for the user to imput words in a text field and then the program is to count the words and the number of times it was inputted................ the problem i am having is to create a linked list to hod the
-
Function module that will return week details
Anyone know Sap FM that will return Week details(as below)for a given start and end dates (similar to the function module HR_99S_INTERVAL_BETWEEN_DATES which returns details for a month) independent of factory calendar I am expecting Inputs Start D
-
MVC - Generate PDF From Details View
Hello, I have a simple application with a list of items in a grid, so when you click on item's name, a popup div shows you item's details. It works fine, however, I would like to have a button inside this details view to generate PDF on the fly. I ha