I'm getting this error message, "An unexpected error occurred (error code -6584)"  Does any know what this is?

I'm getting this error message, "An unexpected error occurred (error code -6584)"  Does any know what this is?

 

Similar Messages

  • I cannot connect to I tunes store using I tune 11.1 I get the error 0x80092013 "secure link to I tunes store failed" does anyone know what this is?

    I cannot connect to the I tunes store after recently downloading I tunes 11.1 I just get the error code 0x80092013 so not sure what to do. I have tried deleting and then reinstalling I tunes with no luck. I tried to flush my DNS but that did not work, I tried the diagnostics in I tunes and it told me my connections were fine but said the "secure link to I tunes store failed" Looking for an answer thanks!

    Okay I was able to connect back to the I tunes store in I tunes 11.1 taking care of the error 0x80092013. I did this in XP going to the firewall controls, selecting the exception tab. I tunes was already in the exceptions tab but I deleted it anyway, then I added I tunes back using the Add Program button then browsing to the I tunes.exe location in the C drive then selected that as the program. I tunes showed back up in the exceptions once again. I then shut down the computer and restarted it and I then had a connection with I tunes. So the I tunes in the exceptions tab in the firewall was not working I just replaced it with a fresh one.

  • HT2433 error code -42110 does anyone know what this means?

    When I switch itunes on I get the error code above - can anyone help?!
    Thanks
    Bis 04

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • Error code 0x884ec692, does anyone know what this error code means?

    I came home tonight and found all of the printer lights blinking and "error 0x884ec692" displayed. I have not been able to find this error code on the HP web site or in the forums. I pulled the power for about 20 seconds and it indicates that all is fine now but I ran into this twice last night so I need to figure out what is going on. 
    Thanks for the help, Tom Davis

    What type of printer do you have?
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I keep getting the message "The backup disk image "/Volumes/Donald  Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

    I keep getting the message "The backup disk image “/Volumes/Donald  Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

    Time Capsule and Time Machine master guru Pondini has all the answers.
    Check # C17 in his excellent support document Time Machine -- Troubleshooting.
    http://Pondini.org/TM/Troubleshooting.html

  • After downloading the latest version of iTunes and updating my iPhone everytime I turn on my computer I get a message that reads: AppleSyncNotifier.exe - Entry Point Not Found. Does anybody know what this means?

    After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.

    Yes.  I just solved the problem on my PC.  Here goes...
    Issue:  My Windows7 computer was producing the pop up box with the error text as you described.
    The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
    Solution: 
    1.  You need to use the Windows File search feature to look for the name "SQLite".  This will quickly locate the offending DLL in the other application.
    2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
    3.  Uninstall Mobile Me.
    4.  Restart your PC.
    5.  Reinstall Mobile Me.
    6.  Mobile Me should sync at this point, but if not, restart the PC once again.
    In my case, the offending program was my Aptana Studio development application.  I had recently the SQLite3 database to my Ruby On Rails configuration...
    This is where the file was located:
    C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
    I hope this helps,
    Ron

  • Everytime I open Safari I get a message that says the "Safari version you are using doesn't support the Community Toolbar."  Does anyone know what this means?

    Everytime I open Safari I get a message that says "we're sorry but the Safari browser version you are currently using does not support the Community Toolbar." Does anyone know what this means?

    Have a read at this thread https://discussions.apple.com/message/15620421#15620421 with similar problem and a solution.
    Stefan

  • I'm getting an "error 404" when I try to connect to a webinar - does anyone know what this means?

    I'm getting an "error 404" when I try and connect to a webinar - does anyone know what this means?

    Basically, it means that either the link you have is bad or the Connect server you are trying to connect to is down or inaccessible.
    HTTP 404 - Wikipedia, the free encyclopedia

  • Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?

    Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
    I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.

    Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?

  • Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90

    Mac Mini Late 2012, does anyone know what this error message means, 4mem/9/40000000:0x7a5c8f90

    What was the Mac ding when you received that error?
    Were you running Apple Hardware Test?
    http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tes ts-on-your-mac/
    Seems like a memory error.

  • For some reason my iPod will not sync with my computer.  It comes up with an error code of 13019.  Does anyone know what this is or where to find out?

    For some reason my iPod will not sync with my computer.  It comes up with an error code 13019.  Does anyone know what this code means or how I could find out? 

    Sorry for  the typos, I hope my message still gets across!

  • Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

    Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • I received error code (-50) when trying to restore my iPad. Does anyone know what this error code means?

    I received error code (-50) when restoring my iPad2. Does anyone know what this error code means and how to fix it?

    See the  More Like This  Section on the right...

  • I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means.

    I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means. I'm confused because I don't have a camera hooked up to my computer.

    may you have directly imported clip to timeline without copying it to local drive..
    update project for links and check if missing clips are there..
    reconnect it if you have it on local drive..

Maybe you are looking for

  • Underpowered USB ports on new MBP with retina display?

    I just recently bought a MBP as described in the title and ran into an issue that I has not been yet reported with the USB ports.  Basically both USB ports seem to have power issues and frequently shut down with mention of a device drawing too much c

  • Satellite L300-1AS - Specification of PC/Express card slot

    I have 4 week old L300-1AS. My quest is I hope simple? what is the corect card spec for this laptop? the slot is 54 wide `L` shaped I`ve been told this will take a 34 or 54 card Type ?. I`ve asked Toshiba UK technicians and am very surprised at there

  • How many bays are available for ram

    I heard that the imac G5 has 512 built in and only one RAM slot. can someone confirm this. this is for the 2.1 20" imac G5 thanks

  • Editing in PS CS 5 / re-save edited version back to Aperture problems with image display

    I use Aperture and send images into CS 5 but since latest Aperture update the images don't always display the adjusted version.  A re-start of Aperture is required. Any suggestions appreciated.  Never had any issues before. 

  • Manager of the org.unit in HRMD_A

    Hi All I would like to send manager of the org.unit by using HRMD_A. As I have setup HRMD_A with filter on Infotypes 0000, 0001, 0002, 0006, 1000 & 1001. I thought the manager relationship will be send in IT 1001. But I don't see that information inc