I'm having a problem with logging into a FileVault-protected user account after restoring from Time Machine backup.

Hi all,
My computer had been running really slowly for a while, so I decided to erase the whole hard drive and reinstall the operating system, and then I was going to restore the files I cared about from Time Machine. The main account, which had all my documents and photos, was FileVault-protected. The last thing I did before erasing the hard drive was to run one last Time Machine backup. As far as I remember, I always ran Time Machine backups with the FileVaulted user logged in.
I don't remember whether I was using FileVault 1 or 2. I had been using FileVault 1, but I installed Lion as soon as it came out and I thought I had migrated to FileVault 2 at that point.
Once I erased the hard drive and reinstalled the operating system, I browsed the Time Machine disk and, within the Users folder, there was no folder for the main user account. When I tried to reinstall everything by restoring from Time Machine backup, I'd get the option for all the user accounts, but when I tried to log in with the main one I'd get the dreaded "You are unable to log in to the FileVault user account "User" at this time. Log in failed because an error occurred." Finally, when attempting to restore from the Time Machine backup again, I noticed something strange: After the computer got to about 10% done restoring, it declared itself completed successfully and rebooted.
I've tried a number of tips that came up from questions about similar issues on the Apple support forum, but had no luck. Is there any way to get these files back? Did they ever even get backed up?
Thanks.

Hroodbwai wrote:
I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
|
|
I'd been logging out and backing up manually on a regular basis.
Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
The only time it's backed-up is when you actually log out.
You should have seen this window on logout:
|
|
followed by this one:
|
|
If you didn't see the second one, or cancelled it, the account wasn't backed-up.

Similar Messages

  • Problem with File Vault account after restoring from Time Machine Backup

    my old 13" macbook 2.4 running OS X 10.5.4 was recently stolen and I've purchased a refurbished 13" macbook pro 2.66 running OS X 10.6. On booting up for the first time I restored from my Time machine backup (via setup assistant) and opted for migration of all files, applications, user profiles etc.
    My main user (with admin privileges) is normally encrypted with File Vault but when I've tried to log in it's coming up with error(3) message. any ideas as to the problem and how to fix?

    Hroodbwai wrote:
    I can't find it! not sure what's going on but the only folder shown is the " Shared" folder.
    Did you have only the one user account? If there were others, they should also be in the "Users" folder. You probably won't have access to the files inside them, but they should be there.
    From what can make out, it looks like it's not backed up any of the files for the filevault account. Can't see user folder when looking through previous backups in Time Machine galaxy view.
    Are you doing that from a Finder window set to your internal HD, or your computer name? It should look something like this (with the Finder in List view):
    |
    |
    I'd been logging out and backing up manually on a regular basis.
    Scheduled backups should run normally; but they won't back up the File Vault sparse bundle, nor will any run manually.
    The only time it's backed-up is when you actually log out.
    You should have seen this window on logout:
    |
    |
    followed by this one:
    |
    |
    If you didn't see the second one, or cancelled it, the account wasn't backed-up.

  • I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

    i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

    Guitar21,
    your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

  • My MacBook pro is freezing at the "moving items into place" phase. I have to restore from time machine each time. I'm talking about the 10.7.4 update

    I can't seem to get the 10.7.4 update to work. It constantly freezing at the "moving items into place" phase. I let it run overnight and it's still frozen. I have to restore from time machine backup each time. Any help appreciated.

    this is somethinng like the third post i have read about that update causing troubles...
    But if I read this right- it is still in the install? Had you restarted and repaired permissions BEFORE the download? As well as emptying cache in safari first?
    The other troubles I read had to do with after install, and caused by...oh what was it...it was early morning...an article at CNET news had it...google 10.7.4 update trouble and read the cnet one.

  • My MacBook Pro recently shut down on me all of a sudden. When I restarted it, it popped up with a gray box with 'OS X Utilities,' then listed various options such as 1. restore from time machine backup, 2. reinstall OS X, etc. what do I do now?

    My MacBook Pro recently shut down on me all of a sudden. When I restarted it, it popped up with a gray box with 'OS X Utilities,' then listed various options such as 1. restore from time machine backup, 2. reinstall OS X, 3. get help online and 4. disk utility. what do I do now? I have not backed up to Time Machine in a few days, so I'm not sure I should restore from time machine backup, is there something else I can do? Help!

    Guitar21,
    your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

  • Help with Restoring from Time Machine Backup with new Hard Drive

    Hello. Recently, my hard drive died in my 24" Early 2008 Aluminum iMac. Luckily, I had a time machine backup, and I took it upon myself to replace the 320 GB Hard Drive with a 2 TB Seagate Barracuda disk. The hardware replacement (although difficult) went fine. Now, I'm having a bit of trouble restoring the new drive from my time machine backup. The new disk shows up in Disk Utility with the correct capacity. I formatted the new drive with Mac OS Extended (Journaled) using my installation disk. My only problem is that the drive isn't showing up when I am choosing which drive I want to restore my time machine backup onto. I can pick out the backup I want perfectly fine, but I can't find the new drive. Any help?

    UPDATE: I restarted it (Classic IT Crowd "Have you tried turning it off and on" moment) and the drive shows up on screen. Right now, I'm waiting for it to "Calculate disk size needed for restore" and I'll keep you posted.
    UPDATE 2: Currently restoring. Let's see if it's successful.
    Message was edited by: funman895

  • Mail.app 4.1 does not work with 10.6.1 after restore from time machine

    After I restored my complete system from time machine backup using the original snow leopard install disc. My Mail.app won't start up anymore. It shows me the message:
    "You can't use this version of Mail with this version of Mac OS X"
    "You have Mail version 4.1 (1076/1075.2). It can't be used Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button"
    I don't understand the error message as mail 4.1 was installed as part of Mac OS X 10.6.1?
    Detailed event log:
    2009-11-03 06:00 AM: Backup succeeded successfully via time machine on my time capsule
    2009-11-03 11:00 AM: Original laptop was broken. (Screen didn't work anymore)
    2009-11-03 03:00 PM: Got a temporary new Macbook Pro from my System Administrator.
    2009-11-03 09:00 PM: Successfully restored complete system on new temporary macbook using time machine with data of my time capsule. Everything looked the same (login image, installed applications, etc...). But when I tried to start Mail.app it gave me the above message.
    Can someone help me with this???
    Kind Regards,
    Niels

    I've seen two possible solutions to this:
    1. Easier, but less likely to work - try to start mail from the Finder, rather than the Dock. If it works, replace the Dock Mail with the Finder one.
    2. More probably the solution: download and reinstall the 10.6.1 combo update. I know you shouldn't need to after a TM restore but ...

  • Web services problem after restoring from time machine!

    I am getting this message every time i reload or log in to the wiki pages created on the snow leopard server after i have restored from time machine due to hard drive problems.
    *The versions of the server and UI don’t match.*
    *Try clicking Reload; if that doesn't work,*
    *please make sure both server components are up-to-date.*
    *Client: WikiServerUI-200*
    *Server: WikiServerUI-198*
    Anyone have a clue how to fix this issue?
    I tried to restore/restart/update/....
    Nothing worked....
    Please elaborate as much as possible if you have any idea how to get rid of this nasty pop up every time you browse between pages or different wikis.
    Million thanks in advance
    cheers
    /samer

    I've the problem as well. When visiting my wiki-server I always get this popup message:
    The versions of the server and UI don’t match. Try clicking Reload; if that doesn't work, please make sure both server components are up-to-date.
    Client: WikiServerUI-198
    Server: WikiServerUI-200
    After a harddisk replacement I restored the server installation from TimeMachine back to the harddisk. From thereon I have the problem.
    What is the problem exactly and how can I get rid off that message?
    Thanx, Harold

  • Restoring from Time Machine backup with older OS

    I was having difficulties upgrading from OS X 10.5.8 to 10.6 so I decided to backup my entire system via Time Machine and then do a clean install of 10.6. The upgrade was successful, however this being a clean installation none of my files were restored. I intended to restore from the Time Machine backup but I'm hesitant to do so because the backup was with 10.5.8 and I'm not sure if I'll run into conflicts with restoring from the old OS. I'm looking to see if the community has had experience with doing this and if it is safe do so. Can I restore from the 10.5.8 backup and maintain my 10.6 OS?

    i'm also curious for the answer on this one :-)

  • Problems opening ical/iphoto/mail etc after restoring from time machine

    hello everybody, hope you can help me!!!
    Problem...
    I got a new HardDisk installed in my Macbook from 2006.
    I made sure all the software was up to date an made a full backup on Time Machine before bringing it to the Mac Store.
    Back home i plugged it in and put the Snow Leopard installation disk, choose installation, chose my preferred language, selected Utilities > Restore System from Backup... and after one hour my laptop restarted and seemed normal.
    Seemed.
    I cannot open:
    Mail, Ical, software update, Itunes, Iphoto etc etc. GGGRRRR!!!
    All my applications don't work?!?!!
    It gives the yellow triangle with the exclamation mark saying:
    ".. can't be opened because there is a problem. Ask the developer for information with this version on Mac OS X, You might have to install the application again."
    What do I do now??

    Thank you for your answer!
    It looks like that, because it mentions "this version of mac OS x".
    The Time Machine backup was made half an hour before I took it to the shop so I guess it was up to date with 10.6.3 (yesterday they released 10.6.4 so that one
    I don't have. My other mac backsup with that version allready)
    No, I installed with the Snow Leopard disk (i asked the guy in the store, he told me NOT to use the old disks which are 10.4.8).
    What I guess you tell me to do is empty my HD again, than install with the original disks and than upgrade till "today" and than try to recover my last TM backup?
    Or any other solutions?

  • Problem restoring from time machine backup!

    Hello,
    Today I upgraded my Macbook Pro to Mavericks just after doing a full Time Machine back up to my ecternal hard drive. Beforehand i did also check if Logic Pro 9 was compatible and from what i saw on the internet it seemed to be, however from my testing it is not. And i have some very important work to be doing with it (already a long way in so can't lose it) so i tried to restore my mac to Mountain Lion through restoring through time machine which was all well and good.. until 1.4%. Which is when it stops, says it hasn't worked, to restart and try again. I am asking anyone for advice with this matter as i currently have a Macbook that is no use to me and really need to get it working again.
    Thank you in advance

    Are you doing the restore after booting into the Recovery Volume?
    Recover your entire system

  • Help with restoring from Time Machine Backup from another computer

    I was required to dump my Mac OSX on my MacBook Pro and convert to a windows machine to use a testing software that did not allow boot camp.  Before doing so, I backed up my hard drive to a partition of my iMac via a wireless connection.  I am now using a boot disk to try to restore my system from the Time Machine backup on the iMac.  I have logged onto my wireless network, but the Mac OSX Installer just keeps saying "Searching for Time Machine Backups..."  My iMac is on (typing this now) and is active on the network.  What do I need to do to be able to see my Time Machine backup from my MacBook Pro?

    Hi m,
    I don't know if this would make a difference or not, but you could try booting the iMac in FireWire Target Disk Mode.
    http://docs.info.apple.com/article.html?artnum=58583

  • Problem after restoring from Time Machine.

    So I just upgraded my imac with a new hard drive. I used a 500mg external drive for my backup. The Time Machine restore happened flawlessly. But now instead of TM backing up anything new from my computer, it wants to back up the entire hardrive (which I can't do, because I don't have enough space. So it seems like it's not recognizing the previous backups...make sense? Please help...

    This is normal after you completely reinstall. If you don't have space on the backup drive then you will need to erase the backup drive (use Disk Utility) then allow TM to do a new full backup.
    You need a backup drive that's at least twice the capacity of the drive in your computer if you use TM, otherwise eventually you will run out of space on the backup drive. When that happens you have to erase the drive or replace it with a larger drive.
    For more help with TM you should read these User Tips at the top of the page.

  • After restoring from time machine, I get a screen with an apple, my user icon, and sleep, restart, and shut down options. When I click on my user icon, nothing happens.

    Any suggestions?

    Run through the list of general fixes here, perhaps one or more of them will get things to work again.
    Step by Step to fix your Mac
    If not you can likely retrieve your files this way, if they are not encrypted,
    Create a data recovery, undelete boot drive
    then use Step #20 in the above link to reinstall everything and return those files
    Think about having alternate backup and restore options to avoid this type of issue.
    When TM fails to restore properly, it's a royal mess to fix as you can see.
    Most commonly used backup methods

  • Install new hard drive, restore from Time Machine, File Vault Problems

    Hello all,
    I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
    The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
    Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
    1) Make a full backup to an external hard drive using Time Machine.
    2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
    3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
    4) Open a terminal and type
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
    6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
    7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
    8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
    9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
    10) Boot into the freshly installed OS and open a terminal and type:
    diskutil list
    11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
    12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
    13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
    14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
    15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
    16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
    What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.

    Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
    All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
    Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup).

Maybe you are looking for