I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Similar Messages

Ipad disabled after upgrading to IOS7.

Ipad disabled after upgrading to IOS7.

I called Apple support. The tech stated he had the same problem himself.
He tried to have me restore my ipad from the backup on my MAC. This resulted in an error message stating my device did not have authority to be restored. The tech put me on hold to research further and Apple dropped my call. I'm hoping the Genius Bar guys have an answer which is where I'm heading next.

TS1702 had Roberts VII apps on my Ipad and after upgrading to OS6.01 the app is gone. How do I get it back without downloading it again?

lost Roberts VII app after upgrade to OS 6.01
don't want to download 1gig again.
where is the add gone and how do i get it back?

You should be able to authorise the account on that computer via the store drop-down menu at the top of it e.g. on a Mac (a PC should be similar) :
If you are on iTunes 11 on a PC then pressing Alt-S should open the Store drop-down menu.
But if you've managed to add it back into the Apps section of your iTunes library then isn't that account already authorised ?

Any experiences about troubles with ipad 2 after upgraded to IOS7?

Hello everyone! I've read in several blogs and websites warnings about possible problems or slowdowns of IPAD2 after the upgrade to IOS7. Has anybody decided to "challenge" these warnings? If yes, have you have any problems or is everything going ok?
Thanks!

I upgraded to ios7 on my ipad2 (Model MC773LL/A) and was very happy with it despite some minor quirks until the 7.0.2 update. Since then, I can't use the home button. It worked just fine and I was even able to make it work after a couple of resets, but as soon as I open the first app, it no longer works. Since the 7.0.3 update which I expected to fix the problem, I can't even get the home button to work after a reset. This iPad2 is pristine and had been cocooned in my Griffen rubberized case since the day it was unboxed. (yes, I took it out of the case since to make sure it wasn't the cause)
While I can use all the other tricks such as assisted touch or gestures, it just ticks me off that the home button doesn't work any longer. Since I am out of warranty, I don't want to waste my time waiting on line to get them to fix something they broke and being asked to pay for it. The button worked fine until the iOS7 upgrade and there is no reason why it shouldn't work today.
My iPad Mini (Model MD528LL/A) appears to be working just fine with iOS 7.0.2, though a bit slower than when it was 6.1.3. However, it seems that since 7.0.3 broke my iPad2 further, I am hesitant to even consider blowing up my iPad Mini as well. My iPhone 5 is working really well on iOS 7.0.3...thank goodness.
I agree with the many comments about the loss of Steve Jobs... Tim, you better get these thing straightened out or that iPhone 5 will be the last Apple product I purchase. Kwon Oh Yun and Risto Siilasmaa are looking pretty innovative these days!

HT6065 after i downloaded OS X i have not been able to open any of my apps can any one help. i also lost my photos. i still have photos on my iPhone. also my apps show up on iTunes

After upgrading to Mavericks OS X v 10.9.1 I see all my apps in itune but i can not open any.
I only got part of my I photos over not all.
My I phone I have all photos and all Apps no problem
What do i need to do on my mac to 1. get all photos and 2. open all my apps.

Were you using iCloud and Photostream?

MDIChildren flickering problem while switching between child form with dockstyle.fill and borderstyle.none

I have an mdi applicaton in Visual studio 2010 (.Net framework 4.0). I'm having a flickering problem when user switch between an MDI Child form. I'm declaring the child form then setting the borderstyle.none at design time and dock property to fill
through programming and make them a MDIChildren before I show them so that it takes up the entire space of the MDI Parent window without being maximized (client request).
i don't want to display control box(minimize, maximize,close) of child form in mdi parent form. (client request)
The problem is that when the child form is being displayed it is briefly shown in it's default size with icon and control box before being resized to fill the available area on the MDI Parent form. When a Child Form loads, you can see it in it's original
size (the size from Design-time) then all this flickering while maximizing .
In other words, child form show up in the client area of the MDIForm, not maximized, with a caption, very shortly, before they are finally filling the client area. there is a short flicker when a new form is created and displayed. This process is most noticeable
with a not-so-powerful PC or there are lots of control inside child form.
below is my code to show child form
MyChild1 c1 = new MyChild1();
c1.MdiParent = MdiMainParent;
c1.Dock = DockStyle.Fill;
c1.Show();
how can i solved the problem of flickering issue?
I tried many options which i have described below
1.double buffering.
2.set style property to child form
this.SetStyle(ControlStyles.UserPaint, true);
this.SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.SetStyle(ControlStyles.DoubleBuffer, true);
3. override below method in each child form
protected override CreateParams CreateParams
get
CreateParams cp = base.CreateParams;
cp.ExStyle |= 0x02000000;
return cp;
4. override below method in each child form
const int WM_NCPAINT = 0x85;
const int WM_SIZE = 0x05;
protected override void WndProc(ref Message m)
if (m.Msg == WM_NCPAINT)
if (this.WindowState == FormWindowState.Maximized)
return;
if (m.Msg == WM_SIZE)
if (this.WindowState == FormWindowState.Maximized)
return;
base.WndProc(ref m);
but I didn't see any effects. please someone help me to resolve flickering issue. thanks in advance.

Hi hardikvaishnav,
This is a known issue which has been reported to Microsoft Connect. Unfortunately, this issue will not fix due to stability issues around MDI. For more details, see
https://connect.microsoft.com/VisualStudio/feedback/details/97787/border-of-mdi-child-form-flashes-up-despite-formborderstyle-none.
You might use a user control or panel instead.
Best Regards,
Bob Wu [MSFT]
MSDN Community Support | Feedback to us

Lost ipad sound after upgrading to ios7

As soon as I click the iOS7 upgrade my ipad volume is gone

First thing to try if you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Still no luck - try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.
If that fails, then try resetting all settings. Settings>General>Reset>Reset all settings. No data will be lost but all device settings have to be entered again.
Should you still have no sound after trying all of these steps, restoring the iOS software would be the next thing to try.

HT1212 My ipad reads disabled. when i plug it in it tells me i need to put in the passcode but i can't get to that screen. can any buddy help

I recently purchased an Ipad3 from a friend cause he upgraded. So i set it up and now its reading "ipad is disabled" connect to itunes. I did have a passcode on there and I know password but i can't get into the screen to put it in. can anyone help or give me a tip please.

This will fix it
http://support.apple.com/kb/HT1212

My iphone 5s is in recovery mode and when i try to restore it itunes says it cant because an unknown error can any one help ????

help

Hi annmarie186,
If you are having issues restoring your iPhone, you may find the following articles helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden

I recently updated to Mac OS 10.6.5 so Firefox will not quit (unless forced to quit), and I get the following error message. "The application Firefox.app can't be opened -600." Same problem with Safari, Google Earth, I-Tunes, and Adobe Acrobat Reader.

I have to actually force quit these applications for this to work. How do I fix this. I also upgraded to Firefox 3.6.13.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

I downloaded update 10.5 and now i have lost all my apps can any one help

be very much appreciated if any one could help me out

As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519 . If you download them to your computer's iTunes you could then try restoring to your backup and see if that restores them and their settings/content back to your device - a backup doesn't contain the actual apps, just their content/settings, so for the restore to work fully iTunes needs access to the apps so that it can restore them.

After importing video to iMovie it plays back at two time sthe speed. Can any one help?How

I am improrting movies from my digital camera, as i have done 50 times in the past. Now they play back in iMovie HD at two times the speed. What's up with that? Has anyone else had this problem and if so can it be solved?

I don't know if it's a fix, but when them clips(fast one's), are in the project, click on it's blue gear(inspector),> Clip Adjustment> Speed= should be 100%. If it helps until fixed, try and slow it down to normal. Just a tempory fix, unless you find the problem on that way.

Please help! I cant download or update my apps after upgrade to ios7.0.2

Anyone have this kind of experience after upgrade to ios7.0.2? I cant download or update my apps? Please help!
Thanks.

Hi,
No, the problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
* I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
* Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
I'm getting mad...

My itunes is not detecting my ipad air can any one help me plz

ever since i updated my itunes its not rdetecting my ipad can any one help me with this problem plz

Hello prachandkhanal,
Thanks for using Apple Support Communities.
If it does not appear under Devices in iTunes after you connect it to your PC try this article.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items to those devices but it won't work. I also have tried copying and pasting those files onto those devices but that doesn't work too. Can any one help?

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem

Similar Messages

Maybe you are looking for