I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Similar Messages

  • After updating with the IOS8 my photos are no longer in an album or photo stream.  Any idea how to correct this issue.  Hate this new feature.

    When I updated my iphone and ipad with the new update IOS 8 my photos are no longer in an album or photo stream.  They are in different files with all the dates that they were taken.  I hate this feature.  Is there any way I can get the photo stream and album back.  Why do they make these changes when they just undo all the good things.  Any help would be appreciated.  Thank you in advance for anyone that can help me.  It is impossible to reach apple when your device is an older model.

    Hey there Trishna51,
    It sounds like you are seeing your photos grouped together by date, rather than the view you are used to seeing. From what you are describing, it seems like you are seeing either the Moments, or Collections view in the photos app. You can switch to the Camera Roll view in Albums located at the bottom of the Photos window:
    From: iOS 8 User Guide
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Help I cannot get on to itunes. It comes up with the message that msvcr80.dll is missing. But i need very straight forward instruction s how to fix this as I am not good with computers.

    Help I can no longer access my I tunes from my computer. It comes up with the message MSVCR80.dll is missing. Can anyone give me very simple instructions as to how i can fix this. I am not very computer literate.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?

  • I have never used indesign to type in text on the spine of a book for submission as a book cover with the POD company Lightning Source. I would be so grateful if someone could tell me how to do this. This is the first time I have ever used a forum.

    Help! How do I type in text on the spine of a book cover template in indesign?

    1. Determine the spine width first. Note that the spine width is relative to the thickness of the paper used for printing. For example, your book is of 300 pages, the spine thickness varies relative to paper thickness (say, 60gsm paper or 70gsm paper, or thicker art paper varieties). Get in touch with the Printer to give you a bound dummy (blank pages) with as many number of pages as your book has. Measure the spine manually from it. When you are more experienced, you would be able to calculate the thickness just by knowing the paper thickness (multiply by number of pages of the book).
    2. Create a spread to represent the back cover (left) and front cover (right). Increase the width of either the left page or right page, to make it exactly the width of book + spine width. Use guides to separate the spine from the cover design area. Type the spine matter and rotate the frames to fit to the spine. Rotation of frames should be in such a way that when the book is kept on table with its front cover on top, the spine text matters should be erect (not be upside down). On completion the whole design should have the bleed area on all four sides, left page as back cover, spine in the middle with rotated text frames, right page as front cover.
    OR
    3. You can also make the spine a separate page. Create a page exactly of the width of spine. Go to Pages panel fly-out and uncheck "allow document pages to shuffle". Arrange the three pages, the back cover the spine and the front cover in that order side by side in the pages panel (you can drag-drop the pages to make the 3 pages spread). Go to layout to make finishing touches.

  • I am looking at a web page with highlighted words that are links that open new windows. I don't even click on them and they upen as I pass over them accidentily with the cursor. extremely annoying!what is it called and how can I remove this 'feature'

    it is usually one highlighted word that when touched, opens up a small window of related companies or info or websites that I might be interested in. one word "presenter" was highlighted, touched it with my cursor, and I think caught a damaging virus.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.

  • I put one movie into the middle of another.  Now the inserted movie frames are not the same size as the other movie.  I can't find how to correct this.  Can someone help?

    Please help.

    If the two files do not have the same dimension you can adjust them via the Movie Properties window.
    When you add two files that don't have the same dimensions the default position for the added file is 0,0 (upper left corner).
    Open the Movie Properties window, single click on the video track you wish to adjust and then click the Visual Settings tab.
    You can then adjust the dimensions (to fit the other track) or the "offset" values to position it (inside or outside of the dimensions of the other track).

  • Update to os x version 10.9.3 now I'm not able to save photos in Jpeg. Can someone tell me how to fix this?

    I'm having trouble saving photo's in Jpeg format with adobe CS6 since apple update os x version 10.9.3.  Can anyone help me with this?

    Yes.  It happens when I crop the pictures.  Does the file size have anything to do with it?? What do I if there is layers?  I'm very new. 

  • Sync session failed to start on my ipod touch. tried to delete back up history but it only shows my daughters ipod touch and not mine! Im unable to update or purchase new aps, not sure how to fix this problem?

    sync session has failed to start on my ipod touch. Tried to delete the back up but it only shows my daughters ipod touch. Iam unable to update or purchase new aps, not sure how to fix this problem?

    Try:
    https://discussions.apple.com/thread/3415227?start=0&tstart=0
    https://discussions.apple.com/message/16400530#16400530

  • My mac will not send or receive email's... its not internet connection... my iPhone still receives emails... so I'm not sure how to troubleshoot this problem, any ideas?

    my mac will not send or receive email's... its not internet connection... my iPhone still receives emails... so I'm not sure how to troubleshoot this problem, any ideas?

    What does the Mail Connection Doctor return?
    The link in my first replay included :
    If you still can’t send or receive email
    Mail Connection Doctor may be able to tell you more about the issue.

  • I'm not sure how to fix this problem?

    I made my original Apple ID a long time ago, and basically, the e-mail account I had used it with was deleted.  I've made a new Apple ID since.  My i-pod is still connected to the old ID, and I'm not sure how to change it.  I also don't remember the information I had used for the original ID.  My i-pod won't transfer all of my music unless I "authorize the computer" and I can't do that with my new ID becuause it "hasn't been used with the computer" yet.  I have no idea what to do now.  Please help?

    Instead of posting this just hit options to the right off any post and scroll down to Report Abuse, select that and leave a message there.I know it's not abuse but it works when you want to report any posts.
    Message Edited by grayburn on 04-Aug-2009 02:06 PM
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • I have two email accounts, an aol account and a corp. outlook account.  When I enable the WI-FI connection I do not receive aol emails, yet I receive the outlook emails on my iphone4.  Any ideas how to correct this?

    When I enable WI-FI on my iphone4 and connect  to my network I do not receive emails from my AOL account, however, I receive emails from my corporate outlook exchange account.  When WI-FI is disabled I receive emails from each account.  Any ideas how to correct this?  Thanks in advance.

    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back soon.

  • I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this.

    I registered my new iPhone 5s to my usual Apple ID, however it isn't showing in my devices when I log in. I tried to register it by adding a new device, but it tells me it's already registered to a different Apple ID. I'm really not sure how to fix this. I only have the one Apple ID and the phone is brand new, purchased directly from Apple.
    When I check on the phone itself (iCloud and App Store settings) the Apple ID is correct. I'm not sure where else to check.
    Whilst setting up the phone, it prompted me to register, which I did. Then when connecting to my laptop through iTunes it prompted me again so I registered again. I even got a confirmation email to the email address associated with my Apple ID that the registration was successful.
    How can I add my iPhone 5s to the list of devices on the correct Apple ID?
    Thanks in advance for any advice.

    Found the answer to my question after posting (in related discussions)
    https://discussions.apple.com/message/12331666#12331666
    Will call Apple Care as soon as I can.

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • I'm not sure how to use this site....but here goes, I have a samsung galaxy and it's fully charged but it will not turn on, can someone give me some solutions as to how I can get it to work?

    I'm not sure how to use this site....but here goes, I have a samsung galaxy and it's fully charged but it won't turn on, can someone give me some solutions I can use to fix this problem???

    Try this website. Yes its sprint but it might help you. http://support.sprint.com/support/article/Troubleshoot_issues_related_to_your_Sa msung_Galaxy_S_II_not_turning_on_completely/WTroubleshootingGuide_542_GKB51165-T rend?INTNAV=SU:DP:OV:TSIS:SamsungGalaxySIi-AsYouGo:TroubleshootIssuesRelatedToYo urSamsungG

  • Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

    Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

    Hi jodilynnf,
    When using Connection Doctor to see what is could be causing the issue, look for the red dots to let you know what is wrong. Then all you have to do is correct that information. You can double click on the section that is giving you issue and it will take you there. Most issues could be just password being entered incorrectly. Take a look at the article below to walk you through troubleshooting issues with Mail.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/en-us/TS3276
     Take it easy,
    -Norm G.

Maybe you are looking for

  • Drop and recreate table in stored procedure

    Hi all When creating tables using Transact-SQL scripts, I have always preferred to drop the table if it exists and then create it explicitly using CREATE TABLE.  For two reasons: 1) It does not matter if it is the first time the SP is run ie. if I cr

  • Dynamic image showing default image instead of requested image

    I'm using CR4E v2.0 to incorporate reports into my application which is built into an ear file and deployed with Jboss 4.2.2 at the moment. I have an image in my report that I am trying to set dynamically from a URL in a database,  but when the repor

  • Subtitles in iTunes 11.

    I have a movie file that has subtitles in multiple languages, however, when played in iTunes 11, only one option is available.  How do I enable the other subtitle tracks?

  • Suppressing 'Ending program' popup window in Windows 7

    Hello, If you configure the system setting AllowBlockingAppsAtShutdown to 1, and there is some program which is blocking shutdown process with ShutdownBlockReasonCreate system call, you get an 'Ending program...' popup window after trying to shut the

  • What exactly does RAM do?

    I am probably going to replace my stock 512MB with 2GB. But before I do I'd like to know more about exactly what it does. Would it make my games I play smoother and faster? And what is different about RAM than processer speed? Thanks, NA