I'm having problems with IWS 41SP8, the log error shows Aborting JVM, then Exiting JVM due to: jvm_abort () and jvm.exitOnAbort 0. What can I do?

Additonal JVM exit statistics: AttachedThreads/Max=255/313, ActiveThreads/Max=323/323, and finally the web server restart.

Hi,
Please look out the below link.
http://knowledgebase.iplanet.com/ikb/kb/articles/5063.html
By the way i would request yout to use JDK1.2.2_011.
I hope this helps.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Similar Messages

  • Anyone else having problems with popups since the new security upgrade? can't get rid of them

    anyone else having problems with popups since the new security upgrade? can't get rid of them

    You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
    For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • I have just got an iPhone 4s on vodafone. I'm having problems with 3G, at the top it says Vodafone E, usually it would say 3G wouldn't it? At the moment my 3G isn't working. Anyone know what to do?

    I have just got an iPhone 4s on vodafone. I'm having problems with 3G, at the top it says Vodafone E, usually it would say 3G wouldn't it? At the moment my 3G isn't working. Anyone know what to do?

    Yeah it does have that on/off switch and it's turned on. Siri won't work for some reason, I don't know if it's to do with this E thing?

  • TS3694 I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

    I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks

    nomibutt wrote:
    ... its showing 1015 error.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • HT201077 I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

    I have Photo Stream enabled with Automatic downloads enabled. Yet when I try to join a Photo stream I get referred to The I Cloud start support page - this happens for both my Mac and my IPad. What can I do?

    The following is from this Apple Document: iCloud: Photo Stream FAQ
    What do I need to use Photo Stream?
    To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software:
    iPhone, iPad, or iPod touch with iOS 6.0 or later
    Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
    PC with Windows 8, Windows 7, or Windows Vista (Service Pack 2) and the iCloud Control Panel 2.1 or later for Windows
    Apple TV (2nd generation) with Software Update 5.1 or later
    You can still use Photo Stream without Shared Photo Streams if your devices meet these requirements:
    iPhone, iPad, or iPod touch with iOS 5.1 or later
    Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
    PC with Windows 7 or Windows Vista (Service Pack 2) and the iCloud Control Panel v2.0 or later for Windows
    Apple TV (2nd generation) with Software Update 5.0 or later
    For complete iCloud setup instructions, visit How to set up iCloud.
    You need Mt. Lion in order to use Shared Photo Streams.
    OT

  • Im having problems with Safari 5.1.10. I often have several tabs open on screen. And after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?

    Im having problems with Safari 5.1.10. I often have several tabs open and after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?
    Kind regards,
    Faroek Abdoelrahman
    The Netehrlands

    Empty the Safari cache more often.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari to test.

  • Hi everyone. I have just started having problems with iCal.  Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

    Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

    Hmmmm.
    At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
    Click on the Finder icon in the dock
    Click on Go > Home
    Double-click Library
    Double-click Preferences
    Look for a file called "com.apple.ical.plist" and remove it to the trash.

  • Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

    Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
    to svchost.exe and therefore is protected from being manually restarted.
    I noticed the following errors when this occurs:
    Log Name:      Application
    Source:        Application Error
    Date:          7/23/2013 4:35:26 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Server1.xxx.xxx.net
    Description:
    Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x46c
    Faulting application start time: 0x01ce877f9476ac07
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
        <EventRecordID>158950</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AAW19XM2.agency.nwie.net</Computer>
        <Security />
      </System>
      <EventData>
        <Data>svchost.exe</Data>
        <Data>6.1.7600.16385</Data>
        <Data>4a5bc3c1</Data>
        <Data>ntdll.dll</Data>
        <Data>6.1.7601.17725</Data>
        <Data>4ec4aa8e</Data>
        <Data>c0000024</Data>
        <Data>00000000000cd7d8</Data>
        <Data>46c</Data>
        <Data>01ce877f9476ac07</Data>
        <Data>C:\Windows\system32\svchost.exe</Data>
        <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
        <Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
      </EventData>
    </Event>
    All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
    about 5 months ago a similar error fired on a non-virtual machine:
    Log Name:      Application
    Source:        Application Error
    Date:          2/27/2013 6:57:58 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      AAW29033
    Description:
    Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x6c0
    Faulting application start time: 0x01ce14e1af313fd9
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
        <EventRecordID>286291</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AAW29033</Computer>
        <Security />
      </System>
      <EventData>
        <Data>svchost.exe_gpsvc</Data>
        <Data>6.1.7600.16385</Data>
        <Data>4a5bc3c1</Data>
        <Data>ntdll.dll</Data>
        <Data>6.1.7601.17725</Data>
        <Data>4ec4aa8e</Data>
        <Data>c0000024</Data>
        <Data>00000000000cd7d8</Data>
        <Data>6c0</Data>
        <Data>01ce14e1af313fd9</Data>
        <Data>C:\Windows\system32\svchost.exe</Data>
        <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
        <Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
      </EventData>
    </Event>
    I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
    the Group Policy Client service to stop?

    You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
    I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
    When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
    however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
    I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
    If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
    **EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
    to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

  • I'm having problems with Outlook for the Mac, anyone else?, I'm having problems with Outlook for the Mac, anyone else?

    I have recently purchased a Mac.  I'm very dissapointed at the way Outlook 2011(the newest version, what?!?)interfaces with the Mac.  I used the contacts feature all the time when I had a microsoft system.  Now, I can't do that with Outlook for the Mac.  Does anyone have any alternative Apps that they've used for Business contacts?  Thanks much.

    thank you both for your responses.  I'm having trouble mostly with a way to handle my business contacts. I'm self employed and when I had Outlook for Microst(before I switched to Apple)I was so pleased with this softward. Esp the way it would keep track of any correspondense between me and my customer.  I could also track billing thru Outlook contacts. 
    Now, I get my mail thru outllook and use ical and @contacts.  I see that I can have a separate group of contacts thru @contacts, but, it's not the same or nearly as good as Outlook contacts for Microsoft.
    So, right now I'm really disapointed with my Mac purchase and hoping to find an app that will help.  I will investigate Thunderbird.
    thanks again.

  • TS1368 Hi users .im having problems with buying from the store & it tells me to contact itunes support . what could be the problem? please help..;))

    When trying to purchase bingo credit it wont allow me and refer me to check itunes support for this purchase...i dont owe money i have itunes credit available ..please help..;
    )

    i also cant connect to itunes or download fany apps? please dont send me to the apple support pages . the info there is useless. its not a wifi connection problem or the router. my friend has the same ipad and is using the same wifi connection and he has not problems with downloading apps. sometimes i can get into the app store and then it starts to download and thenit says it cant. i,ve searched all the forum and no one has given me an answer. please help. i tried the trouble shooting page to and it was no use.

  • Having problems with OS X 10.4 updates. System slows then crashes.

    Hi there,
    Got an older G4 400MHz and have done a clean install of Tiger OS X 10.4 from the DVD onto a new hard drive. Have done the software updates to 10.4.11 and, for some reason, after a while the cursor freezes. I do a restart and the same thing happens. I have done an Erase in Utilities and then reinstalled and only did partial updates to 10.3. But after a while the same thing happens. Panther 10.3.9 is on the the second hard drive and it runs as smooth as glass. It runs iTunes up to 7.5 but 7.6 only runs on 10.4x.
    I cant figure this out. A local Apple dealer told me I should be able to do the 10.4.11 updates and he's done it on an older G4 with no problems. Could this be a system requirements problem? Does Tiger require a faster processor? 10.4 works but just. Or do I have to do a firmware update?
    Any help would be appreciated.
    Take care,
    RD

    ali,
    I didn't get back last night because of a certain football game on TV. WOW is the only word for it. It wore me out. I'm not exactly a Giants fan but I love upsets and close games that end like that. I think the whole country (and world) saw a truly unforgettable Super Bowl, one for the ages and perhaps one of the ten best ever. Not only that but the 1972 Miami Dolphins perfect season of 17-0 shall be preserved, maybe for another 35 years. I remember their 17-0 season with much fondness from my college days, and I'm from South Florida. Oops, I hope you're not a Patriots fan?
    Anyway back to this issue.
    *+If the Firmware, has already been updated, you won't need to do it again.+*
    I did a Firmware update when I was still using 0S 9 and upgrading to Jaguar a few years back. I did the PRAM resets, too.
    *+Check the System Profiler first, to possibly save yourself some time.+*
    I did and it read: Boot ROM Version: 4.2.8f1.
    *+Yes, that's a Kernel Panic.+*
    *+Additional Kernel Panic info.+*
    I read that and it was helpful. There are some workarounds involving holding down the X key etc.
    *+Disconnect all peripherals, except the keyboard & mouse, and see if the system runs more successfully.+*
    I disconnected my Firewire DVD burner. I have a printer and a scanner running off a USB port hub. I'll disconnect them on my next attempt to work in 10.4 on the other hard drive.
    *+Use this utility Rember, to test the RAM.+*
    Download complete and I ran a test on 640MB of SDRAM. The test just finished and I have a log report. As follows:
    Mac OS X 10.3.9 (7W98) running in multiuser mode
    Memory Page Size: 4096
    System has 1 PPC processor(s) with Altivec
    Requested memory: 640MB (671088640 bytes)
    Available memory: 308MB (323526656 bytes)
    NOTE: Memory request is too large, reducing to acceptable value...
    Allocated memory: 308MB (323526656 bytes) at local address 0x01008000
    Attempting memory lock... locked successfully
    Partitioning memory into 2 comparison buffers...
    Buffer A: 154MB (161763328 bytes) starts at local address 0x01008000
    Buffer B: 154MB (161763328 bytes) starts at local address 0x0aa4d000
    Running 1 test sequence... (CTRL-C to quit)
    Test sequence 1 of 1:
    Running tests on full 308MB region...
    Stuck Address : ok
    Linear PRN : setting 1 of 16ok
    Running comparison tests using 154MB buffers...
    Random Value :  ok
    Compare XOR :  ok
    Compare SUB :  ok
    Compare MUL :  ok
    Compare DIV :  ok
    Compare OR :  ok
    Compare AND :  ok
    Sequential Increment:  ok
    Solid Bits : ok
    Block Sequential :
    Oops, only 308MB of the 640MB allocated on the four slots seem to be working. Is that what you read? They are in 1 256MB and 3 128MB sets. I have some back up RAM in a drawer I took out of an old iMac G4. I'll replace some of it and run the test again.
    *+Also run the Apple Hardware Test.+*
    That requires a CD which I don't have. My wife has a iMac G5 which she guards jealously and she may have Hardware Test CD. She may also have a OS 9 Classic Support CD which I need to install Classic on the 8GB partition I created before my latest Erase and clean install. Is 8GB enough for Classic on an 80GB hard drive? I don't think Classic will solve the kernel issue. I had Classic partitioned before on another hard drive, before I bought the new 80GB, and had the same OS X 10.4x update crashes. The cursor becomes unstable and then suddenly freezes usually about 5-7 minutes after booting.
    NOTE: In the kernel panic doc, there is mention of resetting the PRAM. Could the problem be my PRAM battery? I think it needs replacing. I've been getting the message "your computer is set to the wrong date". It presets to Jan 1 1970. A date I remember well. Hung over and sick after a drunken New Year's Eve saying farewell to the 60s and hello to the 70s on a beach.
    You may be right, this isn't a software issue, it's probably corrupt hardware that's easily replaceable.
    Later,
    Rob

  • I am having problems with my computer the whole thing

    it wont load right keeps freezing up my batter and the charger will not work i have it pluged in the wall all the time when i turn it off i have to play with it to get it turn back on so please help me with it

    Hey rachelweed,
    I see that you're having an issue with the battery.
    Try a hard reset first. Here is a document to show you how to do this-http://goo.gl/0gkhv
    Now, if you have to "mess" with the charger which I believe you mean move the charger back and forth to get it to charge, there might be an issue with the power cord itself.

  • I have been having problems with flash opening the Weight Watcher Plan Manager.

    SInce the flash update on July 26th I have not been able to open the plan manager in Weight Watchers. I have uninstalled flash and reinstalled it a number of times.  I even reinstalled an older version and it does not help.  I have already done a clean install, deleted cookies, history and the cache.  I have contacted WW and they are no help.  I usually use Firefox, but it also does not work on Chrome, or IE9. Any ideas?

    You have the latest version of Flash Player installed, and it seems to work (since you can see the Flash animation on the Adobe website).
    A few things to try:
    disable Hardware Acceleration; see http://forums.adobe.com/thread/891337 (re-enable it if it does not resolve your problem)
    disable Protected Mode; see http://forums.adobe.com/thread/1018071 towards the end (re-enable it if it does not resolve your problem)
    try another browser, e.g. the 64-bit version of Firefox: Waterfox, or Internet Explorer

  • Having problem with discontinuity in the waveform

    Hi Experts,
    I am trying to build a multifunction vi that is able to generate analog waveforms and read them simultaneously using USB-6251 and Signal Conditioning Connector Block Model SC-2345. I plan to add a signal from the sensor to the waveform in the future but that is not the case now. However, when I run the program, it turns out to a small discontinuity in the waveforms which I really have no idea how to fix it. And it is quite unacceptable since it affects the shape of the waveform and its frequency. I attached the file. Any suggestions would be greatly appreciated.
    Sorry if my English causes you problems. Thanks in Advance.
    Nattapat Thanesvorakul
    Student
    Solved!
    Go to Solution.
    Attachments:
    kun_4.vi ‏147 KB

    There are a couple issues that could be causing this. First, you are resetting the function generator each time and you are not set for continuous generation.

  • I'm having problem with my printer the carriage is not moving from si

    My printer carriage is not moving from side to side, It's like something not connecting and the light is blinking.

    Please review this post and then post some details.  What printer model?  What operating system?  How is the printer connected?  Are there any error messages?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for

  • We deserve easy access, to our Records & Receipts! Agree or Disagree?

    Where are our Records, and Receipts? Apple, please make finding purchases easier for People! (Below is my Feedback to Apple's Customer Survey:) Apple needs to provide crucial information, about our receipt records. We buy programs, or apps, but later

  • I am trying to delete a Time Machine backup from a Time Capsule.

    I am trying to delete a Time Machine backup from a Time Capsule.  The file is about 400GB and my MacBook has been trying to delete it for 5h now. It still says "deleting" but has not given me a "time remaining" yet. Any idea of what I could do????

  • Lock Box Configuration

    Can anybody told me Configuration for Lockbox in SAP FI module.

  • Log In Failed - Enter New Password

    Hi Guys, I've been using TB for a while now, along with the several email accounts, including: Hotmail, Outlook, Mail.com & to a lesser degree Supanet !? Every now and then, when trying to Send, I get the message "Log In Failed - Enter New Password".

  • [SOLVED] Problems with setting default printer in Libreoffice

    Everytime I print in Libreoffice it complains about me not having set the default printer. Where do I do that in Libreoffice or is it refferring to my setup in cups? Also in systemsettings under KDE4 when I try to manage my printer and I try to set i