I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?
I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?
Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-AHow should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A -
My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.
Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti’s MacBook Pro.sparsebundle” is already in use. Any suggestions?
I am trying to back up my Macbook Pro to a time capsule attached to my iMac. When I first installed the Time Capsule, all backups went well.Reboot the TC.. it has got lost.. or reboot the whole network.. restart in correct order. .modem router.. TC.. clients.
It suddenly will reappear.. you might need to reboot it again in a few days. .such is apple software today.
Some more info C12. http://pondini.org/TM/Troubleshooting.html -
Back up disk image could not be created
HELP!!!
I HAD A POWER CUT OVER XMAS AND NOW WHEN MY COMP TRIES TO BACK UP TO MY TIME CAPSULE AN ERROR MSG POPS UP SAYING "BACK UP DISK IMAGE COULD NOT BE CREATED" I DONT KNOW WHAT TO DO...ADVISE PLEASE!don't know your network set up but take the modem power down first then the remainder of the network wait a few then power back up modem first.
-
HT3275 the back up disk image could not be created (error 30) what does that mean?
I have a error message poping up stating time machine couldnt complete backup to GOFLEXHOME. The backup disk image could not be created (error 30)
For all things Time Machine see Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
The auto backup to my time machine has developed a glitch which prevents the backing up of the iMac. The message is as follows:
'The backup disk image "/volumes/data/Name iMac(7).sparsebundle" is already in use.
Any ideas on how to fix.Welcome to Apple Support Communities
Restart the iMac and Time Capsule. In most of the cases, this should solve that problem. If it doesn't work, read > http://pondini.org/TM/C12.html -
My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
How do I correct this problem?Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it. -
I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9. -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.
Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.
Maybe you are looking for
-
Website providing IP of any skype account to anyon...
I am shocked to find a website that is currently allowing anyone for free to find an IP of any Skype account they type in. It finds my IP and my friends and is correct. It also then goes to allow you to flood the IP to bring the users internet to a h
-
How to prevent images from loading?
I am working on creating a web gallery in Dreamweaver CS3. The thumbnails are in a horizontal strip within a layer above the full sized image layer, in other words the strip is hiding part of the image, but only when the image is in a vertical orie
-
Not Allowing "Next Patch" To Change Set
I'm trying to solve a simple problem with MainStage 3. I've got a number of sets with multiple patches in each, and I want to be able to switch back and forth between patches within sets without the danger of accidentally switching sets, since each
-
Empty Attachment after sending with JAVAMAIL
Hey! In my stand-alone-application works like a observer and i have the following problem: I send a zipfile that contains a xsl-document. I also us the AES256 encryption for the Zip-File. So my apllication send a mail depending on the database-tables
-
Hi, I want to add a discoverer viewer function to my menu to load all available workbooks shared with a user. I can use the seeded AMS_LAUNCH_DISCO to load specific workbooks but what would be the parameter to view all workbooks the same as if you'd