I'm having trouble pairing a PayPal Here device with my iPhone 6

I am having trouble connecting anything via Bluetooth to my iPhone 6+
Last night it was pairing with a PayPal Here device however I had to remove it from the list of Bluetooth devices as it was not working properly. There was a software update being downloaded to my phone but it was stuck on step 2 of 5 for over an hour.
Tonight my Bluetooth is not connecting to anything - the wheel has been spinning, trying to connect, for more than an hour.
I am unsure if the device needs to be updated or the app needs to be updated
Please help

Hi A.M.E.
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots. 
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Cheers,
- Judy

Similar Messages

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • Hi! I have an x-mini headset which im having trouble pairing to my iPhone 5s with bluetooth, any tips please?

    Hi! I have an x-mini headset which im having trouble pairing to my iPhone 5s with bluetooth, any tips please?

    Cellular calling doesn't yet work reliably.
    Make sure you've followed the instructions in this support article. Note that both iCloud and FaceTime on the Mac must be signed in to the same Apple ID; those are two separate steps. Also note that the Mac and the phone must be connected to the same Wi-Fi network. Ethernet won't work. Trying to pair the phone to the Mac as a Bluetooth device won't work either.
    If cellular calling still doesn't work, sign out of FaceTime and sign back in. You may have to do the same on the phone. The email address that you use as your Apple ID must be able to receive FaceTime calls.

  • HT1577 i'm having trouble getting music to load completely on my iphone i purchased.

    i'm having trouble getting music to load completely on my iphone i purchased.

    Welcome to the Apple Community.
    Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
    If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

  • HT1694 I am having trouble setting up my hotmail account on my iphone 5s

    I am having trouble setting up my hotmail account on my Iphone. I've tried many times and still saying UNABLE TO VERIFY YOUR ACCOUNT ? Any suggestions?

    Just use the 'gmail' option when setting it up. There should be no reason to set up incoming/outgoing servers.  Google is killing support for Google Sync (i.e. Gmail set up as an Exchange account) for non corporate customers.

  • Having trouble loading ATT and CenturyLink sites with safari now, anyone else having this problem?

    having trouble loading ATT and CenturyLink sites with safari now, anyone else having this problem?

    Howdy MacRocker,
    Thanks for using Apple Support Communities.
    To start with troubleshooting an issue like this where you're unable to load certain websites in Safari, I suggest that you clear out your browser history and website data.
    Safari 8 (Yosemite): Clear your browsing history
    Happy Holidays!
    Alex H.

  • I cannot pair my Macbook Air (Yosemite) with my iPhone or iPad via Bluetooth.

    I cannot pair my Macbook Air (Yosemite) with my iPhone or iPad via Bluetooth. It is recognising the devices but 'connection unsuccessful'

    That is correct.  Macs do not pair to iPhones, iPads, etc.
    However, pairlng is not required to get Handoff to work.  Both devices must have Bluetooth on, but they need not (indeed cannot) be paired.
    OS X Yosemite: Pick up where you left off with Handoff
    You must be using supported devices:
    OS X Yosemite: supported devices for Handoff, Instant Hotspot, Phone Calling, SMS, and AirDrop

  • I am new to iphone., want to transfer some files from my LG  KM900 via bluetooth, having trouble pairing, is it possible

    Hi there,
    New to the iphone, and love it, but I would like to send a couple of files and photos to it from my previous phone via bluetooth... My previous phone was an LG KM900 and im having difficulty pairing with it... saying its not supported.,
    Can someone give me a list of compatible bluetooth(able) phones, and i will do it through a third party...
    Many thanks and I do hope there is a way to do this
    regards
    Debz

    This is not a feature of the iphone or iOS.
    Bluetooth is supported for stereo headsets/speakers, handsfree telephone
    devices/headsets, some keyboards, some peer-to-peer apps from the app
    store and internet tethering where provided by the carrier.
    Other than this it will not connect to a phone/computer/device.  (thanks to ckuan for the wording)
    You could try emailing the files/photos from the LG and then open the emails
    on the iPhone. Depending on the type of file, the iPhone should be able to at
    least view the contents - editing will require an app capable of dealing with that
    particular type of file. Photos should be viewable unless in proprietary format.

  • Anyone having trouble sharing large images via email with Aperture 3 and OSX 10.7.2?

    I am having trouble sharing images via email with Aperture 3. No matter what size I have in the preferences, the image is thumbnail size. The requested size flashes on the email a couple of times but the small size remains and is sent. I am using OSX 10.7.2. Any suggestions how I may send larger sizes?
    oldgranddad

    I have taught many how to use GUI-based computers.  The number of controls they are aware of on the screen always progresses, usually linearly with the amount of time they spend actively learning the GUI.  Beginners are totally flummoxed that windows can hide other windows.  A step beyond that, they are amazed that they can resize windows using the mouse cursor.  Those two are trivial to most users today, but they illustrate 1. that there is nothing "intuitive" about the GUI, and 2. that the amount one perceives is dependant on the amount one knows. IME, this has nothing to do with age, and everything to do with experience using a GUI.
    Here is a good hint:  if you are using a Mac and can't figure out how to do something, look for something to click.    If you find something that seems promising, try "{Option}+clicking".
    The interface is richer than any one person can master.  Frank's statement "most times we all fail to see everything " is, imho, _always_ true.  We never see everything, even in the grossly limited resolution of our computer screens.

  • HT201210 having trouble restoring my I pad device

    Having trouble restoring my i pad 2 . When I attempt to use safari the screen has a black film and wont allow me to access the web, although I can see all the web addresses All the other areas work properly. So I tried to restore my i pad but I was not able to. Any help would be appreciated . Thanks 
       bill

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I am having trouble keeping wifi connection on my ipad2 and iPhone 5. AT

    I Am having trouble keeping my wifi connection on iPhone 5 but especially ipad2. Have had IPad checked out and is fine. At
    &T has changed the router 3 times but no help.  Will a different router other than AT&T solve this problem and if so, which one.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am having trouble in the app store after upgrading to iPhone 5 and iOS 6

    I am having trouble since upgrading from iPhone 4s to iPhone 5.  The "restore" feature never completed after activation of the new phone (it was close, only "find my iphone" app did not complete - it looked like it is forever trying to download).  But now, when I have tried to update apps, or even purchase new (free or paid) apps, the store does not let me.  It flashes error messages on my screen so quickly they cannot be read (the first is something about signing in to the store with an apple ID).  I have seen other similar threads and have tried logging out and into the app store from the settings menu.
    I also cannot get any of my music to transfer to the iPhone (from the icloud).  It seems to be trying to but I just get the spinning wheel of death.
    Any thoughts or help out there would be much appreciated.
    Thanks

    Hello there, Missy.
    First thing I would recommend is to check your downloads queue to make sure there is not an interrupted download per the following Knowledge Base article:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If your download was interrupted using your iPhone, iPad, or iPod touch
    1. From the Home screen, tap the iTunes app.
    2. For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    3. Enter your account name and password if prompted.
    4. Tap the blue download arrow to resume.
    If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
    For Apps, you can also try tapping on the application icon to resume the download, as outline in this featured discussion:
    App updates won't download on my...: Apple Support Communities
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    via whatheck
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I'm having trouble sharing my i pod list with my other computer. I authorized both computer's, but list is not showing up in my laptop. (2nd generation Ipod nano)

    I'm having trouble sharing my Ipod list with my other computer. ( lap top) I authorized both computer's for home sharing but the list is not showing up on my laptop. My I pod is a second generation nano. So how do I get it to show up on my laptop?.  Also I only have two computer's but it's authorized with 4, two were old computer's, how do I take them off the list without deauthorizing all 4 computer's,? Or do I have to deauthorize all 4 and then authorize the two I have now? my desk top pc is operating on vista, and my laptop is operating on 7. Does that make a difference? HELP! thank you.

    iTunes Store: About authorization and deauthorization
    iTunes 10 for Windows: Authorize a computer to play iTunes Store purchases
    iTunes: Frequently asked questions about viewing and syncing videos
    iTunes 10 for Windows: authorize
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows

  • I am having trouble using analog triggering on PFI0 with PCI-6110

    I am having trouble with analog triggering. I am trying to use PFI0 as an anlog input for triggering purposes and this is on a PCI-6110 card. I am outputing a 10Hz 5Vpp triangle wave signal from an analog output channel and inputing it into PFI0. I am configuring the trigger with the code listed at the bottom. When I start the data acquisition is not triggered. If I increase the frequency up to about 480-500Hz then the trigger will start and then I can actually move the frequency back to 10Hz and it will continue to trigger. Also if I leave the code the same and the waveform the same but switch the trigger type to cwaiHWdigital then it will trigger at the 10Hz level. I suspect that this may have something to do with the coupling of the PFI0 input but I am not sure if this is the case and if it is I do not know how to configure the coupling of PFI0 in measurement studio VB. Any thoughts would be appreciated.
    cwaiDAQ2.StartCondition.Source = "PFI0"
    cwaiDAQ2.StopCondition.Type = cwaiContinuous
    cwaiDAQ2.StartCondition.Type = cwaiHWAnalog
    cwaiDAQ2.StartCondition.Mode = cwaiFalling
    cwaiDAQ2.StartCondition.Level = 2
    cwaiDAQ2.Configure
    cwaiDAQ2.Start

    I tried increasing the voltage and this did not seem to have nay affect on the frequency that it started triggering. I also tried to lower the trigger level. As far as trying other PFI's I dont believe I can. As fas as I can tell PFI0 is the only one that can be used as an analog input and analog trigger.
    I looked at the article in the knowledge base 2ZD9B3W3 and it seems to be a similar problem. I tried to replicate the code in my program but I really have no experience with NI_DAQ function calls in visual basic so maybe I am doing it incorrectly. I did not get any errors but the NI_DAQ function calls are mixed in with CWAI measurement studio function calls so maybe when I configure cwai it resets what I have just changed with NI_DAQ. I could really use some specific direction on how to succesfully set PFI0 to DC coupling with the CWAI control or how to mix measurement studio and NI_DAQ functions.

  • I am having trouble using Facetime. When connecting with known users the connection drops out just as the other person accepts my call

    I am having trouble with Facetime. On answering my call by another party the connection immediately fails

    Hello alancc1942,
    The following article provdies some useful troubleshooting steps that can help resolve such issues with FaceTime.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Cheers,
    Allen

Maybe you are looking for