I'm in the process of creating a WiFi network from my IMac to my LG HDTV.  I am incorporating a LG WiFi capable Blu-ray player and will purchase an Apple Express or Apple Extreme router. I need some advise on using this aquipment.

I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV.  Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme).  What is the correct way to connect these units?  It seem self explanitory,but I'm checking my thinking.  My HDTV is about 20' from where the airport router will be installed with a wall between them.  Has anyone created this network?  Is this the best way to create a WiFi network?

I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV.  Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme).  What is the correct way to connect these units?  It seem self explanitory,but I'm checking my thinking.  My HDTV is about 20' from where the airport router will be installed with a wall between them.  Has anyone created this network?  Is this the best way to create a WiFi network?

Similar Messages

  • Can i use the apple tv3 to connect a blu-ray player to the internet through the ethernet port?

    I Have a blu-ray player which can access teh internet but only through a wired connection. Unfortunately, do to some renovating a can't really pass a wire from my router to the player. I was thinking of getting the express base station and hooking up an ethernet cable and getting it to connect that wy. However, for just an extra 10$ i can get teh apple tv and started to wonder if it would do the same.
    Anybody know if i connect an an ethernet cable between my blu-ray player and apple tv3 if it will be able to connect to the internet?
    Thanks for you help!

    Your blu-ray play can't play to your AppleTV, neither using a wired connection or wi-fi.
    AppleTV only support compressed format.  Therefore, your AppleTV require your content to be within your iTunes library and on the supported format; http://www.apple.com/appletv/specs.html
    There are however wireless devices on which you can plug an HDMI cable.  I don't know the price of such wireless devices but you'll find them on the net.

  • How do I use my Airport Express with a Blu-ray player?

    Hello, first post, long time lurker. Have a question, hope someone can help me
    I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
    What do I have to set up on the airport express to be able to give the blu-ray player internet?
    I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

    Welcome to the discussion area, mareithree!
    You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

  • Trying to connect Sony Blu Ray player to MI424WR router wired through in-wall connection, help!

    Maybe someone can help me. My house has some pre-wired cat5e plugs in the walls. I have my MI424WR router upstairs and my Sony blu ray player downstairs. I first connected the router and blu ray player to the wall with cat5e cables, no luck. I then tried using a cat5e crossover cable from the router to the wall, no luck. The Sony blu ray player has everything set to auto, but do I need to configure something? Can someone help me figure out what is not working? Thank you.

    AEConfidential wrote:
    Shouldn't the wiring in the wall act like a hub with the router plugged into one wall jack?
    No.  cat5 wiring doesn't work that way.  Unlike phone wiring where all the wires are connected together, cat5 wiring connects point-to-point between two Ethernet devices.  You need a continuous cat5 path from the blu-ray player to the router.  The patch panel merely provides a termination point for each cable. 
    The easiest thing to do to get this working is to take a cat5 patch cord and use it as a jumper from the jack going to the blu-ray player and the jack going to the Actiontec router.  That will give you a continuous connection between the two devices.
    Longer term, if you want to add devices in other rooms that have a cat5 cable, you will need to add a switch as viafax999 suggested.
    http://en.wikipedia.org/wiki/Ethernet_switch
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=30&Tpk=ethernet%20switch&Order=PRICE
    You will need to connect the jack going to the Actiontec router as well as the jack going to each room where you want an Ethernet connection to the switch.  The number of rooms you want active will determine how many ports you need on the switch.

  • Does Yosemite support Blu-Ray disc and 4K playback on the iMac with a 4K player?

    If I plug a Blu-Ray or 4K player into an iMac, will Yosemite support playback?  What additional software is needed and available?

    It's hard to say considering Apple hasn't supported Blu-ray yet and the downloaded Blu-ray resources are really not what we exactly want. The most directly way is to install Mac Blu-ray player and Blu-ray drive. Macgo is the best now to support 4K Blu-ray and Yosemite.

  • I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    In addition to RyanJC's comments, the 802.11n AirPort Express Base Station (AXn) can store up to five different http://docs.info.apple.com/article.html?artnum=108081 configuration profiles. You will need to use the AirPort Utility to create & save these profiles.
    To create a new profile:
    Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click "+" to create a new profile; give it a name, and then, click OK.
    Set options, such as network name, passwords, Internet connection method, etc.
    When done setting the options, click Update.
    To switch profiles:
    Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
    Just remember to switch to the desired configuration profile before removing power from the AX.

  • HT201210 at the end of iOS6 download,my ipod touch says 'update failed'.i need some help to resolve this problem. thanks

    at the end of iOS6 download,my ipod touch says 'update failed'.i need some help to resolve this problem. thanks

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to iTunes and update via iTunes. Others have had the same problem.

  • How to automate the process of creating BIAR files

    Dear All,
    Is there any way I can automate the process of creating BIAR files from the repository (Crystal / Webi reports)?

    Hi
    please check the administration guide for BO XI 3.1 (look in the chapter BIAR command line tool)
    [http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf]
    You can generate BIAR files from the command line and thus automate this at OS level.
    Regards,
    Stratos

  • The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use.  Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

    The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use.  Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
    Thanks,
    David W

    There are multiple answers and solutions if you look just to the right under the heading of More Like This.

  • What is the process of creating a Proforma Invoice

    Hi,
    Could any body tell me what is the process of creating a Proforma Invoice.
    Thanks,
    srinivas.

    Hi,
    Once after delivery and shipment created using T-codes
    Delivery - CNS0 / VL01N
    Shipment - VT01N
    the performa Invoice has to be created using T-code VF01.
    In VF01,
    Enter Billing Type, Billing dt, Pricing dt..
    Enter All the deliveries included for a shipment under Document column.
    Then save.
    U will get Performa Invoice..
    Regards,
    Prem

  • I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

    I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read.  Both formats are, of course, readily recognized and indexed by Spotlight.  Journal articles have two essential components with regards to a database:  the topical content of the article itself, and the cited references to other scientific literature.  While a PDF merely lists these references, the HTML version has, in addition, links to the cited items.  Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight.  Embedded URL's are, of course, ignored by Spotlight.  As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them.  Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
      In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight.  This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items"  (along with "Get URLs From Web Pages") give unsatisfactory results.  When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step.  A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed.  Is there a way for Automator to do this?

    Hi,
    With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
    That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
    "I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson  EMP-TW2000 projector. This projector is HD compatible.
    To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
    I prefer option 2, so my question is: which would be the preferred export preset?
    Project specs:
                        - 1920x1080 sq pix  (16:9)
                        - 25 fps
                        - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
    To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video  (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
    So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
    I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
    Please give it a look.
    Thanks,
    Jef

  • Need some advise

    Hi All,
    I need some advise from you JAVA gurus. Here is the situation:
    Our Java development team developed an application running on Weblogic 8.1 SP3. The application is contained in the ear file....which is perfect. They now wanted to go live in about 3 months from now. We were discussing plans how to it live but running into a major show stopper.
    Our Linux/Unix weblogic support group do not support/ allow running any singleton java processes except whatever is running as weblogic instances.
    Application development has a requirement to run these 5-7 singleton small little java program (currently i do not know exactly what these small little java processes does).
    We have proposed that the application team should own these processes and they have to run it outside of the BEA weblogic servers (i.e these singleton processes are not allowed to run on our common Unix machines running WLS8.1 sp3).
    We have only ONE option:
    1) Run these small little singleton java processes somewhere else that will be owned by application team.
    Questions:
    1) What are the problems that may arise if these singleton processes do not co-exist with where the application server runs (hosting the application ear file)?
    2) Is there any other ways of circumventing this problem (any other ways based on your expertise) ?
    3) Also, iam trying to understand these singleton processes, so what questions should i ask before i have a head to head discussions with the application team ?
    [any watch list??]
    Thanks for all your help.
    Take care.

    duffymo/others,
    I was initially confused with the term "singleton" ...what i meant to say was "stand along java processes". So, there is nothing singleton but this application has few stand alone java processes that the Linux/Unix team do NOT want to run where the weblogic managed instances are running.
    So, say my weblogic servers are running on Host A and Host B each having 3-3 each BEA weblogic managed instances CLUSTERED...then these stand alone java processes IS NOT ALLOWED to run there.
    I hope this time i am much clearer .... :)
    Iam sorry .... i was totally confused with this term called "singleton" as i incorrectly misinterpreted as stand alone java processes ....sorry about that again.

  • Need some help in debugging this exported script

    Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
    Forward engineering generated DDL script
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
    DROP TABLE [dbo].[Table1]
    GO
    CREATE TABLE [dbo].[Table1] (
    [test] CHAR(10) NOT NULL
    , [test2] CHAR(10) NULL
    GO
    ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
    [test]
    GO
    GO
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
    DROP TABLE [dbo].[Table2]
    GO
    CREATE TABLE [dbo].[Table2] (
    [test2] CHAR(10) NOT NULL
    GO
    ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
    [test2]
    GO
    GO
    ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
    [test2]
    REFERENCES [dbo].[Table2] (
    [test2]
    GO
    GO
    When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table1;
    END IF;
    END;
    CREATE TABLE Table1
    test CHAR(10) NOT NULL,
    test2 CHAR(10)
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table1_PK PRIMARY KEY( test );
    --SQLDEV:Following Line Not Recognized
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table2;
    END IF;
    END;
    CREATE TABLE Table2
    test2 CHAR(10) NOT NULL
    ALTER TABLE Table2
    ADD
    CONSTRAINT Table2_PK PRIMARY KEY( test2 );
    --SQLDEV:Following Line Not Recognized
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
    --SQLDEV:Following Line Not Recognized
    ;

    Pl do not post duplicates - Need some help in debugging this script

  • Need some hints on using dbms_crypto

    Hello,
    I need some hints on using the dbms_crypto package to generate some password for the OID userpassword attribute. The passwordstring is stored in a format {CRYPT}dasdasdawdww, {SHA}jfsklefjskldjkdlkldf, {MD4}dfdsfgsdgdfewwe or {MD5}fsdfsdadsgdfg where the keyword in the curly brackets describes the encryption methods. I think CRYPT means DES, SHA means SHA-1.
    The key for the DES encryption for UNIX password authentification is in the first 2 letters of the encrypted string. I wanna have an encryption function which encrypts the clear type passwords in the right format like this perl script:
    #!/bin/perl
    print crypt($ARGV[0],"HS");
    #: crypt.pl Test123 # program fetch
    HSF0Sx2zdrLoQ
    Regards
    Holger

    Hello,
    meanwhile I made some investigations on the Problem
    I tried this code:
    DECLARE
    input_string       VARCHAR2 (200) :=  'Test123';
    output_string      VARCHAR2 (200);
    encrypted_raw      RAW (2000);             -- stores encrypted binary text
    decrypted_raw      RAW (2000);             -- stores decrypted binary text
    num_key_bytes      NUMBER := 256/8;        -- key length 256 bits (32 bytes)
    key_bytes_raw      RAW (32);               -- stores 256-bit encryption key
    encryption_type    PLS_INTEGER :=          -- total encryption type
                             DBMS_CRYPTO.ENCRYPT_DES
                           + DBMS_CRYPTO.CHAIN_CBC
                           + DBMS_CRYPTO.PAD_PKCS5;
    BEGIN
            DBMS_OUTPUT.PUT_LINE ( 'Original string: ' || input_string);
            key_bytes_raw := UTL_I18N.STRING_TO_RAW ( 'HS' );
            encrypted_raw := DBMS_CRYPTO.ENCRYPT
                            src => UTL_I18N.STRING_TO_RAW (input_string,  'AL32UTF8'
                            typ => encryption_type,
                            key => key_bytes_raw
    -- The encrypted value "encrypted_raw" can be used here
            DBMS_OUTPUT.PUT_LINE ( 'Encrypted string: ' || encrypted_raw);
            decrypted_raw := DBMS_CRYPTO.DECRYPT
                            src => encrypted_raw,
                            typ => encryption_type,
                            key => key_bytes_raw
            DBMS_OUTPUT.PUT_LINE ('Decrypted string: ' || UTL_I18N.RAW_TO_CHAR (decr
    ypted_raw, 'AL32UTF8'));
            DBMS_OUTPUT.PUT_LINE ('Encrypted Char string: ' || UTL_I18N.RAW_TO_CHAR
    (encrypted_raw, 'AL32UTF8'));
    END;
    /and got these error messages:
    ERROR at line 1:
    ORA-28234: key length too short
    ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 3
    ORA-06512: at "SYS.DBMS_CRYPTO", line 10
    ORA-06512: at line 15In the next try:
    DECLARE
    input_string       VARCHAR2 (200) :=  'Test123';
    output_string      VARCHAR2 (200);
    encrypted_raw      RAW (2000);             -- stores encrypted binary text
    decrypted_raw      RAW (2000);             -- stores decrypted binary text
    num_key_bytes      NUMBER := 256/8;        -- key length 256 bits (32 bytes)
    key_bytes_raw      RAW (32);               -- stores 256-bit encryption key
    encryption_type    PLS_INTEGER :=          -- total encryption type
                             DBMS_CRYPTO.ENCRYPT_DES
                           + DBMS_CRYPTO.CHAIN_CBC
                           + DBMS_CRYPTO.PAD_PKCS5;
    BEGIN
            DBMS_OUTPUT.PUT_LINE ( 'Original string: ' || input_string);
            key_bytes_raw := UTL_I18N.STRING_TO_RAW ( 'HS12345678901234' );
            encrypted_raw := DBMS_CRYPTO.ENCRYPT
                            src => UTL_I18N.STRING_TO_RAW (input_string,  'AL32UTF8'
                            typ => encryption_type,
                            key => key_bytes_raw
    -- The encrypted value "encrypted_raw" can be used here
            DBMS_OUTPUT.PUT_LINE ( 'Encrypted string: ' || encrypted_raw);
            decrypted_raw := DBMS_CRYPTO.DECRYPT
                            src => encrypted_raw,
                            typ => encryption_type,
                            key => key_bytes_raw
            DBMS_OUTPUT.PUT_LINE ('Decrypted string: ' || UTL_I18N.RAW_TO_CHAR (decr
    ypted_raw, 'AL32UTF8'));
            DBMS_OUTPUT.PUT_LINE ('Encrypted Char string: ' || UTL_I18N.RAW_TO_CHAR
    (encrypted_raw, 'AL32UTF8'));
    END;
    /I got some results which have nothing in common with the perl script:
    Original string: Test123
    Encrypted string: DE5668CD7762074C
    Decrypted string: Test123
    Encrypted Char string: ?h?bL
    PL/SQL procedure successfully completed.Come to think of it I doubt if DBMS_CRYPTO is the right way to solve my problem. Any further hints?
    Regards Holger

  • From the Apple TV, I chose netflix from the main menu. I then chose the show Prison Break.  Only 22 episodes from Season 1 are displayed.  When chosing NetFlix from my Blue Ray player I see all the episodes.

    From the Apple TV, I chose netflix from the main menu. I then chose the show Prison Break.  Only 22 episodes from Season 1 are displayed.  When chosing NetFlix from my Blue Ray player I see all the episodes.

    Those are all the episodes for that season, if you want to view another season you need to select it

Maybe you are looking for

  • Text Fadein/Fadeou in DW CS3

    Hi, I was watching a DW CS3 video on youtube about the Fade In and Fade Out behavior. Is that behavior available as a plug-in for DW8? My best regards.

  • Script doesn't work, if GUI subscreens are collapsed

    Hello all, I am to code some scripts to automate some boring, but necessary steps in trainings. Unfortunately my scripts don't work ("The control cound not be found by ID"), if the GUI looks different compared to the reording phase (e.g. other tabs a

  • DB Console service does not start

    Hi, I have installed database 11.1.0.6.0 on W2K Professional and from the command line I have configured Database Control console using the sentence "emca -config dbcontrol db". I have not created a repository. Now I'm trying to start the service usi

  • Computer won't come out of Sleep mode

    I just bought my first apple computer.  It worked great for 2 days.  Now it goes into a sleep mode and I can't wake it up. 

  • Creating Multi-Column API radiogroup based on LOV

    Hi everyone! I was wondering whether or not it is possible to create a 3 column radiogroup based on the APEX_ITEM.RADIOGROUP API in APEX 3.0? For instance, my radiogroup is based on a user's interest level and is supposed to look like: oTest oProduct