I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!
I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is! Can anyone help??
You selected Encrypt iPhone Backups in iTunes. Then you entered a password.
It would be that specific password it is asking for.
See here:
https://discussions.apple.com/thread/3284065?start=0&tstart=0
Similar Messages
-
Does anybody know if the ipad air 1 is using yosemite or something different? I don't know what type of safari i should install because it disappeared from the ipad. Thanks!
YYosemite is a Mac OS and it doesn't run on an iPad. You cannot delete or install Safari on the iPad. It is on your device somewhere.
Swipe from screen to screen to look for it.
Check Settings>General>Restrictions and make sure that you didn't disable it.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad. Settings>General>Reset>Reset Home Screen Layout. -
I lost my iPhone so I used the find my iPhone app on my ipad but I need to verify that it's me on my iPhone so I don't know what to do
Apple ID: Associating and verifying email addresses with your Apple ID
-
Hi Experts,
Since from 15 days I am working on one Dashboard with BEX query, now I have completed that I am able to run that till yesterday. But today my SAP USER ID expired(every 15 days it expires). I have updated same password in all places(CMC OLAP, UNV,IDT) and tried to open the same XLF (which was running fine till yesterday ) after opening that if I tried to edit query or tried to add query or clicked on preview....all ending with locking of my SAP USER ID(SBOP) ..............Don't know what the damn thing happening please seng if you know any solution.
Experts need help to solve this issue urgently .........:)
Thanks in AdvanceHi Mahantesh,
We have faced same scenario,this is happening due to SAP User ID password change.
Stop all the BO work and change the password of SAP everywhere used.Any single point will lock it again.
Try this.This has worked for us.
Regards,
Javed -
Anyone knows how to stop this update? Or how to continue the update so that my Macbook can be shut down or restarted...
Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.
-
I've been typing my password and email correctly for the past hour and the **** message keeps on appearing....this happened after I got an update for the iOS6.....can someone please help me resolve this? T^T
Thanks.I had a similar issue but mine said cannot verify username and password as it was aparently incorrect!
To resolve this i went to generals: App store and clicked on my apple id. when a pop up shows click on view Applie id account. There select the payment process and select NONE in the type of card instead of your visa or mastercard. save it and then you can try getting into facetime., It should be good. It worked for me. Good luck. Lemme know how it goes -
I haven't heard of this problem with any other people so I need help please now. Thanks
To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.
-
Since installing iCloud, my iPhone 3GS no longer syncs with my Outlook2010 Calendar and Outlook2010 Contacts. I don't know what else to try, short of resetting the iPhone and completely reloading as a new device. Any ideas, anyone?
It's good to know. The Apple instructions for loading iCloud on a PC just seem to have either overlooked or hidden this limit. The larger problem is that it partially works: partially and erratically. So clean-up is great fun.
-
I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.
Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do -
hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. I'm really upset about lossing it, if anyone one knows how to fix the problem or another way of tracking my phone that would be great.
The iphone 5 can only be located if connected to a data or mobile network. If in Airplane mode or switched off, it can't be found.
Check this article for more info:
iCloud: Troubleshooting the Find My iPhone app -
yesterday my charger was working fine, all day long I got home and go to plug it in and it's not working, I let my phone die and it starts working like the battery symbol shows up but once the phone is on it stops working. I've tried a couple of leads but I know they aren't proper apple and it still doesn't work, my friend said I've probably fried the battery but I'm not sure, but I know since I got the phone the battery hasn't been all that good, it charges quickly but then also dies quickly, I really don't know what to do and I really need some help, should I get a new lead or replace my phone because I have insurance?
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If nothiing above helped, restore the iPhone to factory settings > Use iTunes to restore your iOS device to factory settings -
My iPhone 4 has been recently stolen :( and I am wondering how can I be able to blocked my iPhone 4 so the one steal it cannot use my phone pls let me know what to do thanks.
Apple does not get involved with lost or stolen items. A carrier may offer IMEI blocking (non in the USA currently do, but elsewhere some do). Your carrier would already know your IMEI number anyway, so just contact them and ask them about it.
It is VERY good that you had a passcode lock on the device. That means your personal information will be safe. And yes, after 10 failed attempts (each with increasing time out between allowing another attempt) the device will permanently lock them out until they restore the device in iTunes. Anyone can go ahead and restore your iPhone as new in iTunes, but that also wipes everything off it and restores it to new condition - which does mean they can go off and use it as theirs, but at least all your data is gone.
Did you file a police report it was stolen? Also your carrier should be told (and ask them about IMEI blocking). Sorry it is gone, but you did the best thing possible to protect yourself and your information when you set up that passcode lock. -
Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?
Hi Amanda,
Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
I would advise you to check the Applications folder and see if your software is in there.
Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
Troubleshooting permissions issues in Mac OS X
http://support.apple.com/kb/ht2963
You may need to contact Adobe Support if this does not resolve your issue:
http://helpx.adobe.com/photoshop.html
Hope this information helps!
- Judy -
When performing the new iPhone(IOS6) update I received an error message - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. Will I lose everything if it goes back to factory settings. Right now my phone wont do anything. It is just showing a cable, an arrow and the iTunes logo.
If you restore from backup.
You should have made sure that everything was on your computer bef ore updating anyway. Did you fail to do that?
All pics taken with iphone should be imported to your computer regularly as you would with any digital camera, most especially before any update/restore/etc. Did you fail to do that? -
I have like 4-5 teeny tiny dots in the screen of my iphone i don't know what they are from. I can only see some of them when I tilt my phone a certain way. And they are little bitty but I am wondering what they are from
my total library is 680 mb, nowhere close to the 2.08 in the pictures folder. I am obviously messing up.
Actually you’re not.
The iPhoto Window reports the size of the library that would result if you exported all the current versions +and nothing else+ to a folder on the desktop.
The iPhoto Library Folder contains the Original, Modified and thumbnail versions of your pics. It also contains various cache and database files +all of which are necessary+ for the working of the Library.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
You can run a Library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD
Maybe you are looking for
-
Open PO Quantity and Open PR Quantity
Dear Friends, How can we get Open PO Quantity and Open PR Quantity?. I used 2LIS_02_ITM, 2LIS_02_SCL to 0PUR_C01 Cube and 0PUR_DS03 DSO and I have done lots of R & D by using restrictions i.e. Delivery Completed indicator, I'm getting GR Qty, but not
-
How to catch error or exception for FM JOB_OPEN in code
Hi, i am calling the FM 'JOB_OPEN' in my code to catch the error message when sy-subrc ne 0 but it is giving dump as there is nothing coming in sy-msgid, sy-msgtype. but when i just run this FM in SE37 then I am able to get the error for example when
-
Why pages is not seen as installed when I have it already installed in my mbp?
I'll appreciate help for this, also I have to open twice a pages file always........is there a way just to double click a pages file once and open it? Thanks!
-
Data source Enhancement for Sales Item
Dear SDN Mates, We are enhancing the data source 2LIS_11_VAITM, when i try to enchance extraction structure it is not allowing to enhance. Showing a message :"2LIS_11_VAITM does not allow enhancing or append structure" Mates if you came across these
-
Condition type NAVS calculation
When i create PO's : Condition type NAVS is been calculated as 0 for some PO's and for other PO's it gives value X. Can somebody help where does the calculation takes place for this Condition type, i tried searching for the existing routines for th