I'm looking for a high quality teleseminar service for mac

i need a teleseminar service that fully functions with macbook. i've been told that gotowebinar can't be recorded on a mac. any suggestions from teleseminar producers?

Anything can be recorded that isn't copyrighted on the Mac. Look only as far as SnapZ Pro:
http://www.ambrosiasw.com/utilities/snapzprox/
If they give you permission to otherwise record copyrighted content with Windows, look at these methods of running Windows on your Mac:
https://discussions.apple.com/docs/DOC-2741

Similar Messages

I am looking for a high quality video converter from MTS or M2TS format to MAC...there are loads of softwares claiming they can do it but all turned out to be disappointing qualitywise...any idea?

I am looking for a high quality video converter from MTS or M2TS format to MAC...many softwares claim they can do it but turn out to be disappointing (low quality...).
Please advice if you know of any solution or serious test forums.
Thanks!

Also, you didn't say for what purpose you need them converted, but this thread might ofer a clue:
https://discussions.apple.com/message/21389296#21389296

Why the apple told about this system for the new iphone 6 but the mine no see the change...?1:28 p.m. Wi-Fi calling is a new feature for making high-quality calls when cell conditions are poor.

Hi apple. in the Keynotes about the new iphone you say..
1:28 p.m.
Wi-Fi calling is a new feature for making high-quality calls when cell conditions are poor.
The question is Work That? i no see the change for me POOR signal here on my office..
my carrier att. have very Poor Signal here on Aguadilla PR.. i take this PHone for this keynotes about the wifi calling is a new feature...
please i need a new respont.. and check the security about iphone Someone call reply the text messenger from the Block area.

It sounds as if you only had one line with an upgrade available. So you can only upgrade one line. For you to upgrade as well, you will have to wait until your upgrade is available. You can check that at MyVerizon. That's just how it works. All carriers and phone brands are the same. I have to wait until February to upgrade. The only thing you can do to get the new iPhone, is add a new line. But then you're paying for a line you don't need.

What is the best video converter for high quality MPEG-4 for Apple TV?

What is the best video converter for high quality MPEG-4 for Apple TV?

Handbrake won't convert AVI files, But there are many more than those mentioned that will
The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
Message was edited by: Winston Churchill

Hi i have tryed looking for my high definition device driver for my acer

Hi i have tryed looking for my high definition device driver for my acer
I have looked on the acar web site and i cant find it at all i am on windows 7 and the updates didn't install it
can some 1 help me find it plz or give me a website to get it

You might want to repost your inquiry to the Acer experts in the
Acer Notebook Support Forum.
Carey Frisch

Any suggestions for good free web hosting service for my IWeb page, other than MObileMe

Any suggestions for good free web hosting service for my IWeb page, other than MobileMe?

MobileMe is not free.
Search : free webhosting
You can narrow the results by being more specific by adding town, province or country.
You can also start by checking out your own ISP.
Or be free as in here : www.000webhost.com
Here's mine : http://dailynews.webege.com/

I'm looking for a high quality image of the flower in the iPhone 5 the website.

There is a flower that is used in the apple website, for the iPhone 5. It is purple and yellow. I've been looking all over the web for it but cannot find an image of it that doesn't have a glare on it. I guess it is owned by apple, but I was wondering if anyone knew where I could find a high quality image of it. Unfortunately it is not included with the iPhone 5.

Hi(Bonjour)!
I see on photo to movie spec page that you can export in full 1920 X 1080 H.264 codec, a high quality format usable in FCE.
http://www.lqgraphics.com/software/phototomovieoverview.php
By the way, how do you deliver your HD sequence from your mac to your HD TV set ?
Michel Boissonneault

High quality format conversion for .mod files?

I'm using MPEG Streamclip to convert .mod files to formats acceptable to FCE 3.0. I've tried a few dozen possibilities, but the files are either unreasonably huge (687 MB for 23 seconds of video) or of poor quality. Does anyone know of a high quality format that requires something on the order of 3.6 MB/min? A previous post (http://discussions.apple.com/thread.jspa?messageID=4815749&#4815749) recommends DV or HDV, but MPEG Streamclip gives many options for DV. Any help would be much appreciated.

They come from a Panasonic SDR-H200. The .mod clip in MPEG Streamclip looks great. Here's the information MPEG Streamclip gives for the clip:
Type: MPEG program stream
Duration: 0:00:23
Data Size: 12.48 MB
Bit Rate: 4.45 Mbps
Video Tracks:
224 MPEG-2, 704 × 480, 4:3, 29.97 fps, 9.54 Mbps, upper field first
Audio Tracks:
128 AC3 2/0, 48 kHz, 256 kbps
Stream Files:
MOV001.MOD (12.48 MB)

What techniques for storing high quality & low size songs in iTunes

I use iTunes with an 80gb ipod for music on my Home Theater system. For this, I'd like to use Apple Lossless files (higher quality & I can afford the big files).
For the family iPods, I'd like to use 320kbps (good enough for iPods & small file size).
What are good techniques for keeping both size files on my iMac? I'd like this to be as simple as possible.

This is often asked and there is not any simple technique. The choices are to either keep two separate libraries (that would be my preference), or to keep separate playlists within a single library.
Note that once you get set up, any new files you add to the library will have to be manually handled to make sure that the 320 version gets added to the additional library/playlists.

High Quality Wide Screen for YouTube - PLEASE HELP!

I am using a Panasonic PV-GS400 camera in wide-screen mode (this is another topic, but the camera still outputs 720 x 480 video, my understanding is that it is called "anamorphic wide screen"). I had figured out some settings to get my videos to appear in "High Quality" mode, wide screen (16:9) in YouTube, but the last couple of times I have tried these settings, they didn't work. Here's what I used:
- Windows Media 856 x 480 frame size
- Frame rate 29.97kbps
- Pixel aspect ratio - square (1.0)
- 2 encoding passes
I got the 856 x 480 ratio from another website. I don't really understand why the pixel aspect ratio needs to be square, but when I tried 16:9 aspect ratio, the video is letterboxed. I also don't understand the two different project modes for PE7 (when creating a new project you can choose the format 4:3 or 16:9). Maybe someone can explain how the widescreen project setting works. Perhaps it is something similar to how my camera does widescreen but the videos are still 720 x 480.
At any rate, if someone has settings that will reliably produce wide screen videos that appear in YouTube's "high quality" mode, I'd appreciate it! Thanks.

As we often say on this forum, the biggest challenge with working with YouTube is that, as soon as someone figures it out, YouTube changes the rules again.
Here's what we've posted to the FAQs at the top of this forum.
http://www.adobeforums.com/webx/.59b6efbd/1

Ideal settings for warm, high quality voice over?

Are there ideal settings to get a high quality voice over? I am using a good Samson mic, but need guidance with the settings? I don't suppose there is an existing preset that could be applied for this--I imagine I'll have to create one.
Thanks.

There are plent of presets that will add ambience to the voice over, but to make it "warm" and not sound "recorded" isn't easy if at all possible using the presets in SB.
The best solution is to make sure the voice track is recorded at as close to "studio quality" as you can get before adding it.
"Egg crate" foam, carpet, fiberglass, mic baffling, all help to minimize background noise and that slight echo that can turn what would otherwise be a really good voice over into an amateurish sounding affair.

Sequence preset H.264 Extreme High Quality (XHQ) 50Mbps for JVC GY-HM 850e

Hi there,
I'm wondering if there is ( or coming soon) a sequence preset for the new JVC GY-HM850e for editing in the H.264 Extreme High Quality (XHQ) 50Mbps mode.
I'm using Adobe premiere CS 6
Regards,
Martin Beeren

It's not that CS6 isn't 'supported'. You can still get help for it, it will still receive bug fixes and whatever updates are needed to work with new Operating Systems. But CC is the latest version, and it's pretty common practice for companies to put new features only in the newest version.
It's common for hardware, too. How often do you see the dealer adding new features to the car you bought last year? Normally you need to buy this year's model to get the new features. The only difference is that you can no longer buy, you have to lease. Some don't like that and will do without the new features. But the warranty on last year's model is still good.
Once again, you can get the needed sequence by right clicking on a clip in the bin and selecting New Sequence from Clip.

Need advice for starting a Managed Cloud Service for Small Businesses

I hope this is in the right forum. I have done a lot of research and searching but havent found anything that specifically answers, in total, what I am wanting to accomplish. I live in a small town and want to start a Managed Cloud Services for
small to small-medium business in my area (2-30 users for each business). I want to market this to have businesses replace their in-house server(s) to virtual ones I would host in a local Data Center with my own equipment that I would maintain. I
am just starting off so I don't have any clients I do this for currently, but I get asked about this frequently. I want to run a 2012 R2 Domain Controller and a Hyper-V 2012 R2 server. The virtual servers I will host are going to be for AD, RDS,
FTP, and files. Software examples that people are going to be using these virtual servers for are Quickbooks, Sage Accounting, Remote Desktop or RemoteApp, custom CRM or small database software, Office 2013, etc. No Exchange currently but will
probably configure something for that in the future (maybe run 1-3 virtually for now if someone asks, but will only do it if the user base is fairly small ~under 10 users). I only have 1 static IP to work with over a 100Mbps connection up and down.
For hardware, I am figuring something along the lines of this:
(1) 1U, single CPU w/2-4 cores, 8GB, 2x73GB SAS 10k RAID 1, Dual PSU, running Windows Server 2012 R2
Domain Controller
(1) 2U, 2x 8-core Xeon ~2.6Ghz, 80GB RAM, 8x600GB SAS 15k in Raid 10 for Storage (VHDX files, etc), RAID 1 small Basic drives (or USB stick) for OS, Dual PSU, Quad GB Nic which I can use for load balancing/teaming, Hyper-V
2012 R2
Hyper-V Virtual Server
(1) GB Unmanaged Network Switch & (1) Cisco 5510 Firewall
Most of my questions are about the best way to configure this. I am planning on managing my Hyper-V from the physical Domain Controller server. Each virtual server will have RDS & (possibly) AD services on a single server.
1) I want to replicate the physical Domain Controller. Should I get another server or just virtualize the replica in Hyper-V? I understand that if the Hyper-V goes down, so does my DC replica.
2) Should I use my Domain Controller to manage ALL users on each virtual Server, by creating separate Organizational Units for each business?
3) Should I setup my domain controller with Hyper-V management and then each Virtual Server I setup be a separate domain (Ex. mydomain.local, business1.local, business2.local, etc)? Each one has no connection to any
other, completely seperate. Or should I do subdomains (business1.mydomain.local).
4) What I have read is that Subdomains are a pain to manage with user rights, etc. I want to keep each server complete separated from one another over a network connection, I suppose the VLan through Hyper-V options
do this? I dont want wondering users to stumble upon another businesses files (I know they would probably be prompted with a login for that business/domain).
5) For each virtual server, I want to create and have an HTTP subdomain point to that server from my domain name. (Ex: business1.mydomain.com, business2.mydomain.com, etc.) I want them to be able to have access to
only their RemoteApps or be able to type that address in their Remote Desktop program as the host name. This would be for viewing the RemoteApp login page and RemoteApps for that business over HTTP/S through a browser.
6) If I do not have separate DC's in each virtual and my main DC manages each one, is their a way to connect up each companies RemoteApps using a single site that only shows what they are assigned to based upon their login?
(Ex. http://login.mydomain.com which then shows that user what they are assigned on their own virtual server)
7) Since each business will use the same ports for RemoteApp (443) & RDC (3389 unless I change it), how would I setup the subdomains to point to their correct server and not overlap for mess with any of the other servers
since its all over 1 static WAN IP for all servers. Thats why I figured setting up IIS subdomains would solve this.
8) For backups or Hyper-V replication, is it better to have software that backs up the ENTIRE Hyper-V server (Acronis Advanced Backup for Hyper-V) as well as replication or just backups? Or should I do separate file
backup on each virtual with a replica? Can a replica be a slower server since its just a backup? (Ex. 1x 8 core, 80GB, 8x600GB 10k SAS)
9) For the servers that will be using FTP, can I again rely on the subdomains to determine which server to connect to on port 21 without changing each FTP servers ports? I just want each business/person to type in
the subdomain for their business and it connect up to their assigned FTP directory over port 21.
10) If the physical DC manages DNS for all Virtual servers, can I forward sub domain requests to the proper virtual server so they connect to the correct RemoteApp screen etc. Again all I have is 1 IP.
I hope all of these questions make sense. I just want every business to be independent of each other on the Hyper-V, each on their own virtual server, all without changing default ports on each server, each server running RDS, (possibly) AD, (a few) FTP,
and all over a common single WAN IP. Hoping subdomains (possibly managed through IIS on the physical DC) will redirect users to their appropriate virtual server.

If you really want to run your own multi-tenant service provider cloud, Microsoft has defined the whole setup needed.
They call it Infrastructure as a Service Product Line Architecture. You can find the full documentation here -
http://blogs.technet.com/b/yuridiogenes/archive/2014/04/17/infrastructure-as-a-service-product-line-architecture.aspx
There are several different ways of configuring and installing it. Here is a document I authored that provides step-by-step instructions for deploying into a Cisco UCS and EMC VSPEX environment -
http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/UCS_CVDs/ucs_mspc_fasttrack40_phase1.pdf
This document contains the basic infrastructure required to manage a private cloud. I will soon be publishing a document to add the Windows Azure Pack components onto the above configuration. That is what would more easily provide a multi-tenant
experience with a Azure look and feel. It is not Azure, but the Azure pack is a series of applications, some of which came from Azure, the provides Azure-like capabilities only in a service provider type of environment.
Whether you use my document or not (which has actually corrected errors found in the Microsoft documentation), you should take a look at it to see what it takes to put something like this up, if you are really serious about it. It is not a small undertaking.
It requires a lot of moving pieces to be coordinated. Yes, my document is designed to scale to a large environment, but you need the components that are there. No need re-inventing the wheel. Microsoft's documentation is based on a lot of
real hands on experience of their consulting organization that has been doing this for customers for years. This one is also know as Fast Track 4. I've done 2 (2008 R2) and 3 (2012), also and it just keeps getting more complicated based on customer
demands and expectations.
Good luck!
. : | : . : | : . tim

Need to find table for dispute case attachments in service for objects

Hi All,
I have a requirement where i need to find some tables which will hold details of dispute case attachments. After a dispute case is created using UDM_DISPUTE transaction, the concerned person may open that dispute case and can attach some documents/any attachments using services for objects icon at the top left corner of the screen. All i want to know is, in which table (tables related to service object) this attachment details will be stored. Even if the attachments details are stored in service objects related tables, there should be some link for this attachment and dispute case. Please let me know if any of you have some pointers and it would be highly appreciated.
Thanks in advance,
Srilakshmi.

Hi a®s,
Thanks for your reply. An entry is getting created in this table SRGBTBREL whenever an attachment/URL/notes is attached to a dispute case using services for object and the link between this table and dispute case table SCMG_T_CASE_ATTR is INSTID_A. This field holds the value of CASE GUID from SCMG_T_CASE_ATTR. Now my requirement is whenever an attachment is present in a dispute case i need to set a customized checkbox present in UDM_DISPUTE screen so that when an user opens the dispute case he/she can understand some attachment is present for this case by seeing the checkbox. I found the SCMG* badi's are not helpful to set the checkbox. Please let me know if you have any idea on how to implement it.
Thanks in advance,
Srilakshmi.

Any tutorial for building adapters and routing services for JBI container ?

Hi
Thank you for reading my post
is there any tutorial for Sun JBI container ?
I want to know how i can build/deploy JBI components like adapters and routing service for Sun JBI container .
another question is that , is it based on OpenESB ?
thanks

You can find a white paper on writing a JBI service engine here:
http://java.sun.com/integration/reference/techart/DevelopingAServiceEngineComponent-1-2.pdf
Also, there is a lot of information on JBI and Open ESB here:
http://java.sun.com/integration/
You ask if the Sun JBI container is based on Open ESB - it's actually the other way around: Open ESB is based on the Sun JBI container. The JBI container is a JSR208-compliant implementation, and Open ESB builds upon that implementation to add full ESB capabilities.
hope this helps -
mark

I'm looking for a high quality teleseminar service for mac

Similar Messages

Maybe you are looking for