I'm new to iPad and have downloaded the Nook app but don't know how to use it to get Nook books to download from my account at BN.
I am new to iPad and have downloaded the Nook app. How do I use it to read the Nook books are that in my account from Barnes&Noble?
From http://www.barnesandnoble.com/ebooks/help-faqs.asp#NOOKapp
How do I download my books to my device? I get a message "Safari cannot Download".Launch the NOOK app software to trigger the automatic syncing of your purchases to your device. You can also manually tap the 'gear' button in the lower right-hand corner of the navigation bar and then hit Account Settings. This will open a screen to allow you to enter your login information which includes your account name and password. Press Go and your information will be verified and then the contents of your on-line NOOK Library will be listed for you. Then just browse your book listings and tap on the book you'd like to download to your device. A popup will confirm your request. Press OK and the book will download to your device in the background, and you'll be notified when it has finished downloading.
Similar Messages
-
Can I transfer an e-book from my Mac laptop to my iPhone? I have installed the iBook app, but don't know if I can transfer my e-books.
Be careful with the transfer talk. Keynote for the pad and the mac are slightly different- so make sure the template they plan to sell you will work on the pad, as opposed to a mac.
If you can get it as a file, you can e mail it to your self, or stick it in drobobx and bring it down, or use your normal syncing device.
How are you syncing your pad now, with a PC?
if they are selling it for the pad, they must have a way to get it to you. So spend some time on their website and see if they have some good instructions for you. -
Google Maps dowloaded, but don't know how to use it or find what I just downloaded?
just bought a blackberry curve and know nothing about it. I went to google maps and clicked download, and it finished downloading and now I do not know how to use google maps or find where it is on my phone. How do I find where it is on my phone? (When I finished downloading it asked if I wanted to "run" or something else, I checked the other box - Also, if I go back to google and try to download google maps again it says it was already downloaded on my phone!)
I do know how to use google maps on a computer, just not on my phone.Assuming that it downloaded and installed ok on your Curve, the first step is to find the application icon. Depending on your theme you're using, you may need to press the menu button to display the full list of applications. Do that by pressing the button to the right of the trackball (with the dots).
The google maps icon is kind of orange and looks like a little folded map. After you click on that, it's pretty straight forward. Click on the menu button to search for a location and get directions.
Hope that's not too basic of instructions. Besides from email, google maps is the thing I use the most. Verizon cripples the GPS, but the approximate location based on cell towers is still super useful. Enjoy! -
The file I copied is the "profiles" file. If that's not the correct one, please point me in the right direction.
Thanks.Is there no ANSWER TO THIS PROBLEM?
-
how do I back up my iphone. I am on my itunes and I have a new I phone and have transfered the all contacts but my apps are not transferrring?
Configuration.
-
I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.
I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.
-
i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated
Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen. -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
I just downloaded 3 podcast items into my iPod shuffle but don't know how to listen to it. It plays the music list but don't know how to get to my podcast list to play it..
jfromnj wrote:
I purchased and downloaded the Family Pack of IWork. I recently purchased another computer (MacBook Pro) and I want to be able to use IWork on the new
computer but don't know how to go about it. The only thing on the Apple home page is to purchase either the item or trial pack. I don't think I should have to purchase anything since a family pack covers 5 computers in the same household. Please, if someone knows how to go about this and what I need to do so please let me know. Thank you.
You didn't keep the download for future use? -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I downloaded Firefox 6.o but don't know how to install it.
I got the "bar" to download the latest version of Firefox for AOL and did all I could to download. I got a box the said "save" or cancel and hit save. It is in my download list but did not install and I don't know how.
https://support.mozilla.com/en-US/kb/Installing+Firefox+on+Windows
-
I need to check the information i have into the cloud boy i don't know how to reach it.
I Need to check the information i've in Icloud but i don't know how to reach it.
Go to http://icloud.com and log in. Whatever is in iCloud that c an be seen, should be able to be seen from there. Other things may need to be restored directly to a device to be seen though.
-
Although I can download the additional content im not able to use it as i dont know if this should appear as a new plug in or an audio unit.
The additional content relates to the stuff that is already included with Logic. So, for example, when you download extra kits for Drummer, they go into the folder that has the So-Cal kit and the other kit that downloads when you do the intial install of Logic.
Same with Bass instruments, Guitar instruments, Orchestral stuff. If you had a look at what came with Logic in the initial install, and then looked in those same places afterwards, there's a whole bunch more stuff in there. -
I upgraded the version of iTunes about a week ago but have not logged on since. when trying today I have received the following message -
"This version of iTunes has not been correctly localized for this language. Please run the English version".
I though I would try to update the version from the Apple site but to do so I have to log into iTunes which is the problem.
Any help would be greatly appreciated!
Thanks,
RonnieStart by trying to repair iTunes from the programs and features control panel.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Since this product is no longer supported by the manufacturer, I hope that someone out there will be able to help me find a way to get my calendar and contacts restored to the desktop. My handheld sat unused for a very long time, but my desktop calendar and contacts were current up until my hard drive crashed. I was able to recover the PalmOne files from the crashed hard drive but all I can see are *.dat files. When I try to import or restore, the *.dat is not a supported file extension. HELP! I have the original installation CD. Thank you
Post relates to: Zire 31
This question was solved.
View Solution..dat are the actual working files Palm Desktop is looking for - you can't import them.
Just create a user in Palm Desktop and copy the .dat files (that have more than 1k of data) over the existing address.dat and datebook.dat (or calendar.dat, I forget which existed on your device).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Maybe you are looking for
-
Creating a directory tree with a JTree???
I want to display in a JPanel the directory structure of my disk, like Windows Explorer. I suppose I have to do it with a JTree, isn't it? But do you know how? The default model only takes strings introduced by me. Thank you very much.
-
Hi, I have a column "Date1" in a table. On the form I define it as Datetime datatye. I have the format mask of 'HH24:MI' on that column. Iam not able to query on that field. Tried adding the foll. code ' AND TO_CHAR(MY_TABLE.MY_TIME, ''HH24:MI'') = T
-
How to define selectedRowKeys for a table?
Hi, I have a table defined in jsff page and it is not defined using searchResultsIterator. Instead it is defined using CollectionModel. How can I define the selectedRowKeys attribute for this table? Table code: <af:table value="#{pageFlowScope.PipePr
-
Can I user JDeveloper (BPEL) with other (e.g. JBoss) AppServer?
Assume I use JDeveloper to create some BPEL Web Services Process flow. Can I deploy these BPEL process flow components to other AppServers (.e.g JBOSS) instead of Oracle AppServer ? If yes: Are there adjustments necessary ? Is there a step-by-step gu
-
Hi Guru, We are trying to create in parallel two Financial Statement (Tcode: FSE2) with a specific part in common. Can I create the common part only in one Financial Statement and in a second time can I copy only a node block in the other one? It see