I'm no good at setting this thing up, and I need some help.

I have the WAP54G. Basically, I have my Mac (the iMac), a Toshiba laptop with Windows, and an older model PC with Windows. Comcast refused to help when they came over to install our internet, but I have a coax cable running into our modem, and an ethernet cable running from the modem into the Mac.
What we're wanting to do is just run the ethernet cable into the wireless router, and that should just give us all internet access. Right? I mean, it seems to want to work for the Mac minus one problem: it says Linksys requires a password.
My moron roommate tossed whatever instructions came with the router, and I didn't really have much luck with the whole live chat or Mac FAQs. So I'm coming here. Remember, I've never hooked up wireless routers before and what I've already said is about all I know about them: that they apparently need passwords. I've got no idea what it's wanting or how I find it.
Can somebody please help me? This is very frustrating since I have to keep unhooking my internet and re-hooking up the router just to test stuff.
Thanks.

Go to Linksys Download page and download the userguide for your router.
Greetings from Northern Ontario, Canada

Similar Messages

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

I'm not that good with computers and I need some help....

I downloaded Adobe Reader 9.3.3 for windows 7 so I could print out sheet music (pdf file). When I try to open it using Adobe Reader, this pops up:
"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association for this program in the Default Programs control panel"
and I need to know what to do, to fix it. It might be a small problem, but I have no idea what to do. so could someone tell me in detail, how I'm supposed to fix this? thanks,

Felix2000 wrote:
Actually, when I open Adobe Reader (just by itself) the same message appears, and if I close the pop-up, adobe reader closes.
That is very unusual - it appears that the Reader is not installed correctly. Can you open Control Panel, then Add/Remove Programs, and uninstall Adobe Reader. Then reinstall it from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.3/enu/AdbeRdr933_en_US.exe

Just got a new printer and i,m new to all this and i need some help please

Hello everyone since i,m new here and i,m trying to fined out how to fined how to get the printer claim code for my new printer as this is my first time useing 1 please could someone help me fined it as its doing my head in.
My printer is a HP Deskjet 1510 All-in-one series . Thank you

Hi,
Is this the one ?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c03775352#N132
No, it doesn't have claim code. Only printers with ePrint enable/ready have claim codes.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock

We have a set of oracle clients running on T5220 zones that need some help

Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PM

Hello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

Error 1603: Need some help with this one

When installing iTunes I first get an error box saying
"Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
The second one (after I click on Ignore on the last box) I get it this one:
"Error: -1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for more information"
Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
Anyway I really need some help with this, anyone got any ideas?
Greets,
Sixten
Windows XP Pro

Do you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper.

My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me

My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me

I thought i was the only one!! but its happening on my ipad! and i dont even want to try on my iphone uhhh its annoying!

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
You can also send my answer to [email protected]
Thanks in advance for all who will help.
slovebk

refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
http://support.apple.com/kb/HT1380
Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
Have a nice day!

Need some help in debugging this exported script

Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;

Pl do not post duplicates - Need some help in debugging this script

My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter, My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter

i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help

Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.

Hi, can anyone help me out with this, I need some help on designing GUI for e-learning coursewares. Some tutorials or some helpful sites will do.

I need some help with the GUI design.

Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium

I'm no good at setting this thing up, and I need some help.

Similar Messages

Maybe you are looking for