I'm on a mac and my printer won't print

I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all in one) but the printer won't print. My printer has been working just fine and now it won't print. Am I doing something wrong. This happened once before and I got frustrated with and left it for about 2 days, I had tried everything I could think of, unplugging for an hour or more, uninstalling and reinstalling, checked ink levels they were fine. Then all of a sudden it started to work again. I just turned on my computer and printer and amazingly it just started to print. Has anyone else had this problem? If so what did you do? Or does anyone have any suggestions of what I may be doing wrong!
Thanks
This question was solved.
View Solution.

Do you have HP software installed (in your Applications folder)? If so and you got it from the printer CD, let's get rid of it:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Now, run a Software Update.
Next, remove and re-install the printer in System Preferences, Print & Fax.
You do not need the software now since Snow Leopard has both print & scan drivers built-in. Scan from Preview or Image Capture apps. Scanning from the front panel of the printer does not yet work.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

I have a Mac and use an EPSON NX510 printer. I would like my printer to only print in black ink unless I otherwise indicate. How do I do this?

I have a Mac and use an EPSON NX510 printer. I would like to print in black ink only and cannot locate how to do this?

You usually find an option to print in black and white or gray scale in the settings of your printer that come up when you choose "print" in the file menu of the program you are using at the time.
BUT, if what you want to do is print with only black ink because you are out of ink in one of the color cartridges, that is usually not possible. For some reason I can't remember, printers makers prevent the use of the printer as soon as one of the color cartridges is empty.

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

We installed a new router and changed the name of the router. Now my HP C4500 printer won't print.

Our cable company installed a new wireless router and changed the name of the router. Now my HP C4500 printer won't print from my laptop.
I can't find any ot the Set Up stuff I used initially.
Is there any way to get my printer to work again...wirelessly?

Get the latest software for your printer from the "Support & Drivers" link at the top of this page. When you start the installation it will ask what kind of installation you would like. Choose "Wireless" or "Network" then click "Next".
Eventually it will ask you to plug in a USB cable to the printer temporarily to communicate the new router's info to the printer. Make sure to not plug in the USB until it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have OSX 10.6.8 and my new HP 6700 printer won't print until I "empty print file!" What does that command mean? How do I do it?

I have OSX 10.6.8 and my new HP Officejet 6700 all-in-one printer won't print until I "empty print file!" What does "empty print file" mean. How do I do it?

Go to System Preferences>Print & Fax>Open Print Queue, select(highlight) any jobs and delete them. Do this for all printers in the left side bar (select printer when you click Open Print Queue)
Hope this helps

Plz help Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

Plz help
Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

/var is a hidden folder, so you mustn't remove the folder.
The only solution is to reinstall OS X. If you have OS X Lion or Mountain Lion, use OS X Recovery > http://support.apple.com/kb/HT4718
Hold Command and R keys while your MacBook is starting and reinstall OS X. You won't lose anything. If you have a backup, you can restore it after starting in OS X Recovery instead of reinstalling Mac OS X, so you will save a lot of time

Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

Plz help
Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

Reinstall OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

B210a Printer won't print yellow and anything yellow based.

I just replaced all of the ink cartridges on my Photosmart Plus B210a printer (genuine cartridges by the way) and now the printer won’t print yellow or any yellow based color (green, orange etc). Help?

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My HP Photosmart C7280 All-in-One printer won´t print out documents, just pictures ...

My HP Photosmart C7280 All-in-One printer won´t print out documents, just pictures. I´ve used the printer, since it was new on the marked, and it has worked perfectly until a few weeks back. There is no problem printing out pictures, but only blank pages comes out when I´m printing out documents. Regardless if it is Word, Excel etc.
I´ve never used anything else than original cartridges, and the printer is used on Mac OS X 10.7.4. I´ve tried to reinstall the printer several times without any success.
Can anyone help me?

Hello,
Please print a Self - Test report.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01448018&cc=us&dlc=en&lc=en&product=3204785&tmp...
Can you see any of the colors as appear on the report sample?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

After upgrade to snow leopard, my printer won't print

I recently upgraded my operating software to snow leopard, but now my wireless printer won't print any jobs coming from my Mac. The printer icon is still in the dock, but every time I try to print something I get an error message, and it won't print. When I go to my system preferences, it is still listed there.
Anyone have any ideas?

Because you control what's posted in your profile, not what the computer is running. Go here and update your product info.

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document. I need to keep printing a blank page or any other page to get my previous documents completely printed. Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010. I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that. Any help would be greatly appreciated!!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

All in one printer won't print black ink - colour only

My all in one printer won't print in black right now - colour only - even though the black ink is new. It will print a couple of black ink pages and then reverts to colour. If I give it a rest it will print a couple more black pages and then again, in colour - I think something needs cleaning but I don't know what - any help is much appreciated! Val

Please read this post then provide some details. What printer model? What operating system? Is the black cartridge an original HP or a third party or refill/renamufactured cartridge? (The symptom is typical of a poorly refilled cartrdige....)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer won't print full page

my hp m601 printer won't print full page from web browser , it's not working even if i'll change landscape nor portrait

@ti_Sh
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I'm on a mac and my printer won't print

Similar Messages

Maybe you are looking for