I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.
I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!
I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!
Similar Messages
-
The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
I paid $20 for Keynote for my MAC mini. I made a presentation and now I want to send it to my iPad. Do I have to buy an iPad version of Keynote to be able to play the presentation on the iPad.
evelyn fromfrankland river wrote:
... have to buy an iPad version of Keynote to be able to play the presentation on the iPad.
Yes... -
I am trying to restore my Mac OS after a hard drive failure and my password is no longer recognized, however I can log in by double clicking on the Lion Icon? How can I reset my password
First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combinationcommand-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions. -
Help! Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week and the shop didn't update it back to Mavricks which I had previously done...and now my Mac won't let me past the log in screen even with correct password entered. It just spins like I'm logging in and then goes back to the user log in screen. I did the process where I restarted and pressed control S and created a new user and password, but once created same issue and can't get passed that screen.
Super frustrated and any help is appreciated!I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan. -
Sophos found this on my mac mini (early 2009) - OSX/FkCodec-A and could not clean it up. I am running Yosemite 10.10 and the path and filename for this Trojan is /Volumes/macvexe/macvexe.app/Contents/MacOS/mac.installer. Could someone please tell me how to get rid of it as Sophos is unable to remove and Trash can remove it.
outdoor,
How did you originally install iWork on the Mac Pro? was it preinstalled? The machine seems old enough that you should have an original install DVD that came with the mac pro.
Amazon has the install DVDs for iWork '09:
http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=i Work+%2709
To move tables between sheets you can select the table, copy, then paste after activating (by clicking) the destination sheet. If you really mean move, then use the cut command (rather than copy).
To copy... use the menu item "Edit > Copy"
To cut... use the menu item "Edit > Cut"
Then paste in the destination -
Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.
Hey jamesarm97 & diegofoto,
On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks,
Matt M. -
My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC. I hate to spend another $179 if this is just something I'm doing wrong. Please help
I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11. -
i have a mac mini (without sd/sdhc card slot) and a sony cx160e camcorder and i want to import 50p video files, but i don't want to convert my video's. How can i import my video's?
Connect the camera to the computer with a USB cable and use the camera as the card reader. Make sure the camera is in playback mode.
-
Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out
Hi Elaine
Here si what I do:
Since I tend to message with teh same people I leave the messages available to me. If you are in one conversation with "Karen" and want to message with "Kathy" tap the message back arrow and select Kathy.
As always just be careful to rememeber who you are messaging to! -
Since I have installed Lion onto my iMac it's impossible to to copy any video file from the mac to an external support (ups-stick, Timecapsule). What's happened? What can I do?
If you just did upgrade Lion, give it some time. I recall having similar problems and some articles mention heavy background work after install - such as re-indexing for Spotlight etc. I couldn't even copy from folder to folder or e.g. iphoto to folder on the same disk. Went away after a day or two though.
I do however still have a problem with AFP access to one of the lion machines - kills it's network adaptors rather quickly. No luck solving this so far :| -
Hi. I tried all the steps above but I still cannot open any of my apps. They close instantaneously. Any one have any insight? Thanks!
This happened after I got my carrier to unlock my phone.Hi, I tried all the steps listed in these forums and they didn't work (I deleted the apps and added them back, I dled a new app, I signed in and out of my acct, I synced my phone, I did a reset holding down the power and home button, etc.). Finally I just restored the phone and added back the apps I wanted. That took care of it. Thanks.
-
Ever since Firefox updated the last time, my games won't load on Pogo, I have to play them in Internet Explorer, they were working fine before.
Mozilla are aware of the issue in Firefox 3.6.14 and are working on a fix, no timescale but they are planning on a quick release. Firefox 3.6.15 will fix the issue with some Java applets not working, which has caused many Pogo games to stop functioning.
-
My iphone 4s is no longer making sound when i have an incoming call or message after installing ios7.... any help?
It still vibrates but no calling sounds or message sounds. It's not on mute and the speakers are working... I can hear music etc.
Oh yeah no keypad noises either.Same thing has happened to me. I have tried every trick that's been posted here. I just ran out of options. Galaxy phone is starting to look better by the minute.
-
Lion server on Mac mini server stop responding to ssh and VNC (other services like mail, ical works well)
Version is Lion server 10.7.4
When I attach a monitor to it, I saw all the buttons and menus stopped responding too. I can only push and hold the power button on the box to shutdown.
It only started happening recently.
Anyone has any clue?
Thanks for the help in advance!!!Found that the second hard drive is broken. I have to go to the apple store to have it replaced.
I had to press the power button to turn the server off for several times, then the broken hard drive went disappeared. After that, I had to disable the Spotlight. Then the server went back to work normally.
Now I made a CCC copy of the primary hard drive, and would like to have the server run on the external raid disk (connected through thunderbolt). Does anyone have previous experience with it? Any expectable drawback or issue with this setup?
Maybe you are looking for
-
customer paid advance payment along with cheque in sap we will do post in f-29 bank dr to prepaid of customer where we mention customer cheque no in sap. how to identify this cheque is cleared other than brs
-
To change Font size and style in a cell
HI! . I would to know if it is possible to change to the source and the text of alv. I have seen that with class CL_SALV_WD_UIE_TEXT_VIEW and method SET_DESIGN, Font size and style in a cell can be changed, but i don´t know how do it and what objects
-
Microsoft update invited me to update to 14.1.4 today but the process fails with the following error: "Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume."
-
I'm having this problem since few releases ago, whenever I start FF, it always fails to sync, showing this line on the bottom "Sync encountered an error while syncing: Incorrect account name or password. Sync will automatically retry this action". Fi
-
Engraving with a unicode character
didn't know where the best place to ask this question was... i'm about to replace my 5th gen ipod with an 80GB ipod classic. i want to get it engraved with a unicode character (ॐ), but when i type it into the "Line 1" field it doesn't show up. It sho