I'm trying to add a header beside my logo and center the header only

I'm trying to add a header beside my logo and center the header only

Have you got a code for your master-head?  If not try something like this:
HTML goes like this:
<div id="masthead">
<div id="logo">
</div>
<div id="header">
  Header Goes Here </div>
</div>
Your CSS goes like this:
#masthead {
min-width: 600px;
#logo {
float: left;
width: 200px;
#header {
margin-left:200px;
text-align: center;
If this not what you want then please post a link of your work you have already done so that basic CSS code can be given to center your text.

Similar Messages

  • I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

    I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.  I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it.  Any ideas on what to do?

    Thanks but that doesn't give me the information I need.  I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use.  My Apple ID can be varified, just not the email that they will contact me with.

  • SharePoint 2010 Allow User to Add Comments to Files in a Library and to the Header of the Web-Page

    (1) I need to allow an end-user to be able to add comments to files either when they are added to a library or after they are added. I didn't see a Column available for adding to a Document Library for "Comments".
    (2) I need the same user to be able to add text/comments to the Header of the web-page that contains the library (above the library at the top of the screen).
    When I (the SP Admin) add the "Content Editor Web-Part" to the top of the web-page that contains the Document Library, the Toolbar disappears. The Content Editor Web-Part would be ideal to allow the end-user to add comments to the Header, but I
    really need the Toolbar available.
    Is there another Web-Part that I could use for allowing comments to be added to the Header of a web-page without disabling the Toolbar, or is there a known-fix for allowing the Toolbar to be available and functional after adding a Content Editor Web-Part?
    JCashon

    Hi,
    According to your post, my understanding is that you want to add Comments to Files in a Library and to the Header of the Web-Page.
    (1)If you use the document content type in the library, it will contain the “Comments” field automatically. When you add the document, you can enter the conments. You can also edit the “Comments” field after the document added.
    (2)If you add the add the "Content Editor Web-Part" to the AllItem.aspx Page, you can add the text to the web part as the Header.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • TS3694 Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?

    Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?

    Hi luxmi01,
    Here is some information and troubleshooting on the permissions issues you are seeing:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Cheers!
    - Ari

  • I am trying to add music to my slide show and I get this error:

    I am trying to add music to my slide show and I get this error:  The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed.  I went to the Adobe site and downloaded a codec program, and restarted but still got the same error.  Any help would be much appreciated.
    Anne

    Thank you - I followed the instructions attached to your response, and I deleted the artwork from the three songs that I want to use, however, when I drag them into Photoshop I am still getting the same error message.  I also don't see an option to convert the song to an MP3.  I tried going to File and Get Info, and there isn't an option.  I also tried right click on the song, but didn't see anything there either...?

  • Hi experts,  Since i am trying to add a new field in pa0006 ...the sap stan

    Hi experts,
    Since i am trying to add a new field in pa0006 ...the sap standard view t528c has been modified..how can i restore the old view(total fields has been changed)

    Check the version mangement and retrive the request with your old changes.

  • HT4571 I have been trying to add data to my I pad and when I add it it goes to a page that says error. Is there another way to add data?

    I have been trying to add data to my I pad and when I add it it goes to a page that says error. Is there another way to add data?

    The installer is over 5Gb's and could take many hours to download.
    Check the download status in the App Store application.

  • Trying to add a signature on my apple email but the preferences will not let me select a signature...any suggestions

    Trying to add a signature on my apple email but the preferences will not let me select a signature...any suggestions

    copping out wrote:
    Trying to add a signature on my apple email but the preferences will not let me select a signature...any suggestions
    Lion or Snow Leopard?
    Either way go to Mail>Preferences>Signatures
    And make one.

  • I was trying to add music onto my new ipod, and my itunes said it needs version 10.6.3. i then downloaded it, then it said it requires mac os x version 10.6.8. what does that mean?

    i was trying to add music onto my new ipod, and my itunes said it needs version 10.6.3. i then downloaded it, then it said it requires mac os x version 10.6.8. what does that mean?

    If it's a fourth generation or earlier model, you need to download iTunes 10.6.3; the newer versions won't run on 10.5.8.
    If it's a fifth generation iPod touch, you need to buy a Mac OS X 10.6 DVD, which requires an Intel Mac, and then run Software Update. This also works with earlier iPods but isn't the best solution.
    (73177)

  • I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

    i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

    Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
    I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
    If your existing router is not an Apple AirPort Base Station, the Express:
    can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
    can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
    Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
    To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click.  Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

  • I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and paste and doing the header separately from the text.

    I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and pasting   the header separately from the text. I know there is a way besides a screen shot but I've spend hours trying to find it.

    Smurfslayer wrote:
    For the particularly persnickety types you might want to expose the full headers in the email message as well.  It's easy enough to do, from mail's 'menu' select "view"; then "message"; then all headers.
    Another option you could use is a screen capture using Grab.
    Activate Grab, then shift + command + w (for a window screen shot).  Then confirm the window selection and click the mail message. 
    Dave
    Why are you addressing this to me...?
    I am not the OP...

  • I recently tried to import 2 CDs but on one, only the first 4 songs imported and on the second, only the first 6 imported.  The CDs work fine in a CD player.  Any suggestions?

    I recently tried to import 2 CDs but on one, only the first 4 songs imported and on the other, only the first 6 songs imported.  The CDs work fine in a CD player.  Any suggestions?

    Rip the CDs with another program on your computer, and add the resulting MP3s to your iTunes library.  (If you use Windows Media Player for this purpose, make sure the Rip Setting is on MP3, or else it will default to a useless format known as WMA.)

  • My iPhone is acting up again; freezing up during phone calls and now the head phone jack intermittently doesn't work.

    I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
    Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
    <Re-Titled By Host>

    The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
    I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
    I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
    Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out.

  • Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

    tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

    Hey there Alex,
    Welcome to Apple Support Communities.
    It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
    iCloud: iCloud Control Panel setup cannot be started - Apple Support
    So long,
    -Jason

  • TS1503 Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

    Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

    Hi there AnthPy,
    You may find the troubleshooting steps in the article below helpful.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    -Griff W. 

Maybe you are looking for

  • Print queue doesn't open (and preference button doesn't work either)

    Okay, this has been my only problem since upgrading to Leopard and it's kind of annoying. For some reason I have not been able to get my print queues to ever open up since upgrading. I have three printers currently installed: • Apple LaserWriter 16/6

  • Permission issues in sql window authentication

    Is it possible to grant a Windows group access to SQL Server rather than individual Windows logins  which has only read/write permission on table data in sqlserver.I am getting error while logged in by using window authentication.

  • DST - Choose the key from the allowed namespace

    Hi everyone. I am trying to add the new Timezone setting as per note 919538. When I do, I get a message "Choose the key from the allowed namespace". Another search in OSS said that this can only be correct with a support pack. Does anyone else have e

  • Working with naming redundancy of MTS files

    I am new to working with MTS files in prelude and eventually Premiere and have a few questions about the proper workflow.  I would be very grateful for any wisdom. first off background on the project: - We have .mts files from several different consu

  • Maximum Number of Mirrored Databases Decreases as Number of Available Cores Increases?

    Hi, I wonder if you can help me. We're planning a large in-house mirroring deployment and are concerned we may (at some point) run into the limits described in the following KB article: http://support.microsoft.com/kb/2001270/en-gb. Based on the form