I'm trying to change a color setting in bridge

I'm trying to change a color setting in bridge and I get the following message "Suite color management is not enable"
How do I enable it???

I'm new to CS4 and bought a book called "Adobe Photoshop CS4 one-on-one and when installing it it has me change the color settings in Photoshop which I was able to do. Then it tell me if I own the full Creative Suite 4 to change the setting in Adobe Bridge. Question, I have Adobe Photoshop CS4, is that the full Creative Suite Package??

Similar Messages

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color.

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color. I click on a new color and press enter and nothing happens...not sure what I am doing wrong.

What do you currently see?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Do you have the menu bar?
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Do you have any toolbars visible at all?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

I am trying to change the color of a background layer and it will not accept the color I want

I am trying to change the color of a background layer and it will not accept the color I want

If you want to get help you may have to provide a lot more details about what you are doing (which tools or commands do you use, what exactly happens when it fails, …)?

Trying to change the color of a single cell

hi, I am trying to change the color of a single cell when mouse moves over it, but couldn't do it. i even tried my own renderer, but it doesn't work. can anybody help ?

Here is what I am trying to do. I am displaying some data in a java JTable retrieved from a table in database. What is needed is when user moves his mouse over any cell in the third column, the cursor should change to hand cursor and possibly the background color should also change, to indicate the user that this cell is clickable. I have to show some other report when user clicks any cell in column three. The code follows as
import java.awt.*;
import java.sql.*;
import javax.swing.*;
import java.awt.event.*;
import javax.sql.rowset.*;
import javax.swing.table.*;
public class MouseMotionInTable extends JFrame
public static void main(String[] args)
MouseMotionInTable f = new MouseMotionInTable();
Toolkit tk = Toolkit.getDefaultToolkit();
Dimension dim = tk.getScreenSize();
int w = dim.width;
int h = dim.height;
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.setBounds((w-600)/2, (h-300)/2, 600, 300);
f.setVisible(true);
MouseMotionInTable()
Connection con = null;
CachedRowSet crs = null;
try
   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
   con = DriverManager.getConnection("jdbc:odbc:FMS", "", "");
   Statement st = con.createStatement();
   String query = "SELECT ItemName, Alias, ItemReOrderQuty, ItemMeasure FROM ItemInfo";
   ResultSet rs = st.executeQuery(query);
   crs = new com.sun.rowset.CachedRowSetImpl();
   crs.populate(rs);
   st.close();
catch (SQLException e)
   e.printStackTrace();
catch (ClassNotFoundException e)
   e.printStackTrace();
finally
   if(con != null)
    try
     con.close();
    catch (SQLException e)
     e.printStackTrace();
DBTableModel model = new DBTableModel(crs);
table = new JTable(model);
JPanel center = new JPanel();
center.setLayout(new BorderLayout());
center.add(new JScrollPane(table), BorderLayout.CENTER);
add(center, BorderLayout.CENTER);
table.addMouseMotionListener(new MouseMotionAdapter()
   public void mouseMoved(MouseEvent me)
    int col = table.columnAtPoint(new Point(me.getX(), me.getY()));
    int row = table.rowAtPoint(new Point(me.getX(), me.getY()));
    if(col == 2)
     Object val = table.getValueAt(row, col);
     boolean isSelect = table.isCellSelected(row, col);
     boolean focus = table.isCellSelected(row, col);
     TableCellRenderer cellRender = table.getCellRenderer(row, col);
     Component comp = cellRender.getTableCellRendererComponent(table, val, isSelect, focus, row, col);
     comp.setCursor(new Cursor(Cursor.HAND_CURSOR));
     comp.setBackground(Color.yellow);
private JTable table;
class DBTableModel extends AbstractTableModel
ResultSet rs;
ResultSetMetaData rsMeta;
DBTableModel(ResultSet rs)
try
   this.rs = rs;
   rsMeta = rs.getMetaData();
catch(SQLException e)
   e.printStackTrace();
public int getColumnCount()
try
   return rsMeta.getColumnCount();
catch(SQLException e)
   e.printStackTrace();
return -1;
public String getColumnName(int c)
try
   return rsMeta.getColumnName(c+1);
catch(SQLException e)
   e.printStackTrace();
return "";
public int getRowCount()
try
   rs.last();
   return rs.getRow();
catch(SQLException e)
   e.printStackTrace();
return -1;
public Object getValueAt(int r, int c)
try
   rs.absolute(r+1);
   return rs.getObject(c+1);
catch(SQLException e)
   e.printStackTrace();
return "";
public boolean isCellEditable(int r, int c)
return false;
public Class getColumnClass(int c)
return getValueAt(0,c).getClass();
}

Trying to change the color of the title?

Through the Titles feature, I've created a title. It has come out white. Now I want to change the color.
I went to Help and it says to "Select the title in the Project Browser, and then click Show Fonts in the viewer. The iMovie Font Panel opens."
I selected the title, but then I could not find anything that says "Show Fonts." Can someone help? Thanks.

James Snedeker wrote:
.. how do I create my own titles with which I can change the colors/fonts/etc?
if you don't need the title over video, use any 'paint'.app to create your own title design (btw: Keynote offers nice templates...), import 'chart' as a still.
if you need the title over video, follow advice and get some inspiration on my site:
http://sites.google.com/site/karstenschluter/imovie09tricks
btw: if the DevTools are installed on your Mac, and you're familiar with the tool QuartzComposer, you can change font and color in all 'effected' titles.. but tricky

Trying to change new tab setting to open a specific website every time

When I have a window of Firefox open, and I click to open a "New Tab", I am wanting the new tab to default to Google. Right now, it goes straight to www.trovi.com (a search engine I've actually never heard of until this issue surfaced). I've made Google my home page. I've changed my default search engine to Google. I've updated every setting I can think of, but I'm clearly missing something...because still, when I click to open a new tab, it goes to trovi.com and not Google. I've restarted Firefox. I've completely shut down my computer, turned it back on, and then checked the settings to see if they worked...which they don't. I would even be ok if clicking "New Tab" opened up to a display of recently visited pages in tile format. I just really need trovi.com to go away from my "new page", and am struggling to find out how to do so. I've read the support boards, tried some of the suggestions...nothing is working. Any help you provide will be *greatly* appreciated. Thanks so much in advance for your time & efforts.

See:
*http://malwaretips.com/blogs/trovi-com-removal/

I am trying to change the color background in the Sports Theme of Imovie 11

I am using the Pre-Set Theme (Sports) and want to change the theme color from blue to green. Any ideas of how to do this?

No unfortunately those themes are baked right into iMovie and not to be altered unfortunately. In a manner of speaking, What you see is ALL that you get. Everybody gets the same color no matter what.

Trying to change the bios setting.

I have been trying for days to access the bios on my Notebook Pavilion g series. I have tried f2,f6, and f10. I am shutting down completely and starting over. I have tried to restart and push the function keys. Nothing works. I have tried to do a bios update and got error that it failed. System tune-up failed as well. Please help! Thanks.

You are getting into dangerous territory with a failed bios update. If the bios is corrupt, you may not be able to even fix you machine without someone reflashing your bios or buying a replacement mother board. I think you probably had a failed bios update because your system was not stable when you tried it. Try a hard reset:
http://h10010.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01684768&product=1132551
Then try only one piece of memory at a time. All during the boot up try to tap the F10 key about a 1 sec pattern.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Error message when trying to change brush colors.

Using CS6 beta and everytime I use the color picker or hit the x or d key I get this message: could not complete your request because of a program error.
Using Windows 7 64 bi and CS5 works fine.

A few common troubleshooting solutions:
Restart Photoshop and/or your computer.
Make sure your operating system and drivers, including your graphics driver, is up to date. (Check with the manufacturers website).
Reset Photoshop's preferences: http://forums.adobe.com/message/4209421#4209421

Changing background color in JTable, only changes one row at a time...

I'm trying to change the color of rows when the 5th column meets certain criteria. I think I'm very close, but I've hit a wall.
What's happening is the row will change color as intended when the text in the 5th column is "KEY WORD", but when I type "KEY WORD" in a different column it will set the first row back to the regular colors. I can easily see why it's doing this, everytime something is changed it rerenders every cell, and the listener only checks the cell that was just changed if it met the "KEY WORD" condition, so it sets every cell (including the previous row that still meets the condition) to the normal colors. I can't come up with a good approach to changing the color for ALL rows that meet the condition. Any help would be appreciated.
In this part of the CellRenderer:
        if (isSelected)
            color = Color.red;
        else
            color = Color.blue;
        if (hasFocus)
            color = Color.yellow;
        //row that meets special conditions
        if(row == specRow && col == specCol)
            color = color.white; I was thinking an approach would be to set them to their current color except for the one that meets special conditions, but the two problems with that are I can't figure out how to getColor() from the table, and I'm not sure how I would initially set the colors.
Here's the rest of the relevant code:
    public void tableChanged(TableModelEvent e)
        int firstRow = e.getFirstRow();
        int lastRow = e.getLastRow();
        int colIndex = e.getColumn();
        if(colIndex == 4)
            String value = (String)centerTable.getValueAt(firstRow, colIndex);
            // check for our special selection criteria
            if(value.equals("KEY WORD"))
                for(int j = 0; j < centerTable.getColumnCount(); j++)
                    CellRenderer renderer =
                        (CellRenderer)centerTable.getCellRenderer(firstRow, j);
                    renderer.setSpecialSelection(firstRow, j);
import javax.swing.table.*;
import javax.swing.*;
import java.awt.Component;
import java.awt.Color;
public class CellRenderer extends DefaultTableCellRenderer
    int specRow, specCol;
    public CellRenderer()
        specRow = -1;
        specCol = -1;
    public Component getTableCellRendererComponent(JTable table,
                                                   Object value,
                                                   boolean isSelected,
                                                   boolean hasFocus,
                                                   int row, int col)
        setHorizontalAlignment(JLabel.CENTER);
        Color color = Color.green;
        if (isSelected)
            color = Color.red;
        else
            color = Color.blue;
        if (hasFocus)
            color = Color.yellow;
        if(row == specRow && col == specCol)
            color = color.white;
        //setForeground(color);
        setBackground(color);
        setText((String)value);
        return this;
    public void setSpecialSelection(int row, int col)
        specRow = row;
        specCol = col;
}If I'm still stuck and more of my code is needed, I'll put together a smaller program that will isolate the problem tomorrow.

That worked perfectly for what I was trying to do, but I've run into another problem. I'd like to change the row height when the conditions are met. What I discovered is that this creates an infinite loop since the resizing triggers the renderer, which resizes the row again, etc,. What would be the proper way to do this?
Here's the modified code from the program given in the link. All I did was declare the table for the class, and modify the if so I could add the "table.setRowHeight(row, 30);" line.
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.border.*;
public class TableRowRenderingTip extends JPanel
    JTable table;
    public TableRowRenderingTip()
        Object[] columnNames = {"Type", "Company", "Shares", "Price", "Boolean"};
        Object[][] data =
            {"Buy", "IBM", new Integer(1000), new Double(80.5), Boolean.TRUE},
            {"Sell", "Dell", new Integer(2000), new Double(6.25), Boolean.FALSE},
            {"Short Sell", "Apple", new Integer(3000), new Double(7.35), Boolean.TRUE},
            {"Buy", "MicroSoft", new Integer(4000), new Double(27.50), Boolean.FALSE},
            {"Short Sell", "Cisco", new Integer(5000), new Double(20), Boolean.TRUE}
        DefaultTableModel model = new DefaultTableModel(data, columnNames)
            public Class getColumnClass(int column)
                return getValueAt(0, column).getClass();
        JTabbedPane tabbedPane = new JTabbedPane();
        tabbedPane.addTab("Alternating", createAlternating(model));
        tabbedPane.addTab("Border", createBorder(model));
        tabbedPane.addTab("Data", createData(model));
        add( tabbedPane );
    private JComponent createAlternating(DefaultTableModel model)
        JTable table = new JTable( model )
            public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
                Component c = super.prepareRenderer(renderer, row, column);
                // Alternate row color
                if (!isRowSelected(row))
                    c.setBackground(row % 2 == 0 ? getBackground() : Color.LIGHT_GRAY);
                return c;
        table.setPreferredScrollableViewportSize(table.getPreferredSize());
        table.changeSelection(0, 0, false, false);
        return new JScrollPane( table );
    private JComponent createBorder(DefaultTableModel model)
        JTable table = new JTable( model )
            private Border outside = new MatteBorder(1, 0, 1, 0, Color.RED);
            private Border inside = new EmptyBorder(0, 1, 0, 1);
            private Border highlight = new CompoundBorder(outside, inside);
            public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
                Component c = super.prepareRenderer(renderer, row, column);
                JComponent jc = (JComponent)c;
                // Add a border to the selected row
                if (isRowSelected(row))
                    jc.setBorder( highlight );
                return c;
        table.setPreferredScrollableViewportSize(table.getPreferredSize());
        table.changeSelection(0, 0, false, false);
        return new JScrollPane( table );
    public JComponent createData(DefaultTableModel model)
        table = new JTable( model )
            public Component prepareRenderer(TableCellRenderer renderer, int row, int column)
                Component c = super.prepareRenderer(renderer, row, column);
                // Color row based on a cell value
                if (!isRowSelected(row))
                    c.setBackground(getBackground());
                    String type = (String)getModel().getValueAt(row, 0);
                    if ("Buy".equals(type)) {
                        table.setRowHeight(row, 30);
                        c.setBackground(Color.GREEN);
                    if ("Sell".equals(type)) c.setBackground(Color.YELLOW);
                return c;
        table.setPreferredScrollableViewportSize(table.getPreferredSize());
        table.changeSelection(0, 0, false, false);
        return new JScrollPane( table );
    public static void main(String[] args)
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
    public static void createAndShowGUI()
        JFrame.setDefaultLookAndFeelDecorated(true);
        JFrame frame = new JFrame("Table Row Rendering");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.add( new TableRowRenderingTip() );
        frame.pack();
        frame.setLocationRelativeTo(null);
        frame.setVisible(true);
}Edited by: scavok on Apr 26, 2010 6:43 PM

Changing fields color in CL_GUI_ALV_GRID using class

Hi,
I've written a lot of posts but still I have problem with changing color for CL_GUI_ALV_GRID.
I have class ZKSL_CL_4_17_ALV_GRID_OO with 3 methods : SELECT, HANDLE_DBL_CLICK AND DISPLAY_ALV
I want to change fields color every time I double click on IT.
METHOD SELECT.
   DATA:
         lt_sflight                TYPE TABLE OF           zkslt_sflight,
         ls_layout                 TYPE                    lvc_s_layo,
         lr_custom_container       TYPE REF TO             cl_gui_custom_container,
         lr_my_class               TYPE REF TO             zksl_cl_4_17_alv_grid_oo.
   SELECT * FROM zkslt_sflight INTO TABLE mt_sflight
      WHERE carrid    = iv_carrid AND
          ( fldate    IN it_date OR
            price     IN it_price OR
            planetype IN it_type )
CALL FUNCTION 'Z_KSL_SCREEN'.
ENDMETHOD.
from FM z_ksl_screen i call screen 400 and from status_400 output I call method DISPLAY_ALV
METHOD display_alv.
   DATA:
          lr_custom_container       TYPE REF TO             cl_gui_custom_container,
          lt_sflight                TYPE TABLE OF           zkslt_sflight,
          lt_catalog                TYPE STANDARD TABLE OF lvc_s_fcat,
          ls_catalog                LIKE LINE OF            lt_catalog,
          ls_layout                 type                    slis_layout_alv,
          lr_my_class               TYPE REF TO             zksl_cl_4_17_alv_grid_oo.
   CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
     EXPORTING
       i_structure_name = 'ZKSLT_SFLIGHT'
     CHANGING
       ct_fieldcat      = lt_catalog[].
************BULID LAYOUT
   ls_layout-no_input = 'X'.
   ls_layout-colwidth_optimize = 'X'.
   ls_layout-totals_text       = 'Totals(201)'.
   ls_layout-info_fieldname    = 'LINE_COLOR'.
   IF mr_gui_alv_grid IS INITIAL. "-----------------------------------if----------------------&
     CREATE OBJECT: lr_custom_container
       EXPORTING
         container_name = 'DISPLAY',
         lr_my_class.
     CREATE OBJECT mr_gui_alv_grid
       EXPORTING
         i_parent = lr_custom_container.
     SET HANDLER lr_my_class->handle_dbl_click FOR mr_gui_alv_grid.
     CALL METHOD mr_gui_alv_grid->set_table_for_first_display
       EXPORTING
         i_structure_name = 'ZKSLT_SFLIGHT'
        is_layout        =   ls_layout
         i_save           = 'A'
       CHANGING
         it_outtab        = Mt_sflight
         it_fieldcatalog = lt_catalog.
   ELSE.     "-------------------------------------------------ELSE---------------------&
     mr_gui_alv_grid->refresh_table_display( ) .
   ENDIF.
ENDMETHOD.
In handler i am trying to change fields color and call method display sending new out_table
CALL METHOD me->display_alv
     CHANGING
       ct_fieldcat = lt_fieldcat.
Please give me some easy advice how to do that.
thank you in advice.

Thank you Klaus for your reply,
The problem is that I need to make this using classes.
I tried to make my structure data with LVC_T_SCOL as you wrote,
a field of table type LVC_T_SCOL in the structure of your output table
DATA BEGIN OF lt_data.
       INCLUDE STRUCTURE sflight.
       DATA cellcolors TYPE lvc_t_scol .
   DATA END OF lt_data.
TYPES: BEGIN OF mtt_tab.
*         INCLUDE STRUCTURE ZKLST_sflight. " I get error that I cannot use ref to abap dic
           INCLUDE TYPE ZKSLT_SFLIGHT.
           TYPES: cellcolors TYPE lvc_t_scol ,
             END OF mtt_tab.
After making type mtt_tab
i declare data   lt_tab                    TYPE STANDARD TABLE OF mtt_tab.
and when I try to copy table mt_sflight (it is atribut of calss) like below
LOOP AT mt_sflight INTO ls_mt .
*   READ TABLE lt_tab INDEX sy-tabix ASSIGNING <ls_tab>.
*   MOVE-CORRESPONDING <ls_mt> TO <ls_tab>.
*    UPDATE lt_tab FROM TABLE mt_sflight.
     MOVE-CORRESPONDING ls_mt to lt_tab.
   ENDLOOP.
I am getting error "lt_tab is not internal str or table with header"
Can you help me with this?

How do I change the color of the users name after they sign in?

I am trying to change the color of the users name after they have signed in on the top right hand corner. When you hove over the login it shows up "Welcome (Users name) Log Out", The "welcome" and "log out" are in white and I know how to change them, but trying to find out how to change the name so it appears a different color is getting the better of me. Please help.

Hi blackroseuk7,
You can use firebug to inspect the element to see what div to target and from there you can set the color with CSS.
Hope this helps!
Carol - BCGurus.com

Change frame color of brushed canvas theme

Dear all, is there a way to change the frame color of the brushed canvas theme? I've been trying to change the color to align it with my used colors but it looks like the background is a complete image. Any kind of help is highly appreciated.
PS: I'm using the newest version of keynote in Yosemite

Reading your post again I realise what you mean by frame.
The "frame" can't be altered on its own, the background is a single image file so the whole image is changed when altering colour.
A quick but rough Workaround is to place a rectangular shape on the slide, sized to cover the whole slide. Set with no fill, a coloured border around 50 pixels in width and the opacity reduced. It looks a bit muddy however.

Changing Tab Color

I have been struggling for a while with trying to change the color of a tab, after it's been displayed. Some background is that i have a multi tab window. If something happens in one of the windows, I want to bring attention to that tab and color the tab red.
I am dynamically adding the tabs to the tab navigator from database table. I read them in with their data and when I have them all I build up the tab navigator. My TabObject is really a Canvas that I have extended.
                private function AddTabsToTabNavigator():void
                    var lIsFirst:Boolean = true;
                    for each ( var lTab:TabHandler in mTabDictionary )
                        // Create our Frame Canvas that we are going to add to the Tab Navigator
                        var lTabItem:TabObject         = new TabObject();
                        lTabItem.name                  = lTab.GetTabName();
                        lTabItem.SetRefreshTime(lTab.GetTabRefreshInterval());
//lTabItem.setStyle( "tabStyleName", "tabStyleGreen" );
//lTabItem.styleName = Constants.TAB_STYLE_GREEN;
//TAB_NAVIGATOR.invalidateDisplayList();
lTabItem.setStyle( "backgroundColor", "green");
                        TAB_NAVIGATOR.addChild( lTabItem );
I've tried a number of things comented out here. I have a CSS and I can set the initial color of the tab no problem.
mx|TabNavigator
    tab-width: 110;
    horizontal-gap: 3;
    tabStyleName: tabStyleYellow;
    selectedTabTextStyleName: tabSelectedText;
.tabStyleYellow
    font-size: 10;
    corner-radius: 10;
    fill-colors: yellow, #FFFFFF; /* #9D9DA0, #FFFFFF */
    fill-alphas: 1.0, 1.0;
    background-color: #FFFFFF; /*6486AC*/
But I don't see how I can go back and change the tab color.   Am I missing something
Here is another way I've tried.
                public function ChangeTabStyle( aTabName:String, aStyleName:String ):void
                     var lActiveTab:TabObject = TAB_NAVIGATOR.getChildByName( aTabName ) as TabObject;
//                    var lTab:DisplayObject = TAB_NAVIGATOR.getChildAt( mCurrentTabSelected ) as Tab
                    if ( null != lActiveTab )
                        lActiveTab.setStyle( "tabStyleName", "tabStyleBlue" );
//                        lActiveTab.styleName = aStyleName;
//                        lActiveTab.setStyle("fillColors", ["red", "white"]);
//                        lActiveTab.setStyle("backgroundColor", "red");

I have been struggling for a while with trying to change the color of a tab, after it's been displayed. Some background is that i have a multi tab window. If something happens in one of the windows, I want to bring attention to that tab and color the tab red.
I am dynamically adding the tabs to the tab navigator from database table. I read them in with their data and when I have them all I build up the tab navigator. My TabObject is really a Canvas that I have extended.
                private function AddTabsToTabNavigator():void
                    var lIsFirst:Boolean = true;
                    for each ( var lTab:TabHandler in mTabDictionary )
                        // Create our Frame Canvas that we are going to add to the Tab Navigator
                        var lTabItem:TabObject         = new TabObject();
                        lTabItem.name                  = lTab.GetTabName();
                        lTabItem.SetRefreshTime(lTab.GetTabRefreshInterval());
//lTabItem.setStyle( "tabStyleName", "tabStyleGreen" );
//lTabItem.styleName = Constants.TAB_STYLE_GREEN;
//TAB_NAVIGATOR.invalidateDisplayList();
lTabItem.setStyle( "backgroundColor", "green");
                        TAB_NAVIGATOR.addChild( lTabItem );
I've tried a number of things comented out here. I have a CSS and I can set the initial color of the tab no problem.
mx|TabNavigator
    tab-width: 110;
    horizontal-gap: 3;
    tabStyleName: tabStyleYellow;
    selectedTabTextStyleName: tabSelectedText;
.tabStyleYellow
    font-size: 10;
    corner-radius: 10;
    fill-colors: yellow, #FFFFFF; /* #9D9DA0, #FFFFFF */
    fill-alphas: 1.0, 1.0;
    background-color: #FFFFFF; /*6486AC*/
But I don't see how I can go back and change the tab color.   Am I missing something
Here is another way I've tried.
                public function ChangeTabStyle( aTabName:String, aStyleName:String ):void
                     var lActiveTab:TabObject = TAB_NAVIGATOR.getChildByName( aTabName ) as TabObject;
//                    var lTab:DisplayObject = TAB_NAVIGATOR.getChildAt( mCurrentTabSelected ) as Tab
                    if ( null != lActiveTab )
                        lActiveTab.setStyle( "tabStyleName", "tabStyleBlue" );
//                        lActiveTab.styleName = aStyleName;
//                        lActiveTab.setStyle("fillColors", ["red", "white"]);
//                        lActiveTab.setStyle("backgroundColor", "red");

ID CS3 - Cannot change image color (imported using "Place")

Hello. I'm using ID CS3, Windows XP, SP3.
I am new to ID CS3, coming from PageMaker 6.5, and when I converted one of our brochures, everything looked great. In fact, we have some images that are tif's (I think this means it's a bitmap). The images are black and white (they are apples). Our print process is Black and a Spot Color, so the apple images are the spot color.
The converted PageMaker6.5 apples are great, they are the spot color, and when I change the spot color, they change too. If I add a new apple image through the Place command, even the exact same file, it imports as black and white, not with the spot color. In PageMaker6.5, this is how it worked, and then I would select the image and then select the spot color. In CS3, when I select the image, and select the color, it either colors the stroke or fill. Obviously I don't want the stroke, and the fill doesn't affect the apple, only the white behind the apple, so I end up with a still black apple on a colored background in the rest of the frame.
What I want is:
Background: Paper or None
Apple: Spot Color (at this point, any color would be fine)
I have tried applying styles, object/character/paragraph, I have tried the Object->Image Color Setting as found on Adobe help area, except this option is grayed out. I have tried Place, and while selecting the file, selecting "Show Import Options" but it grays out all options when the pop-up box appears. I can't figure out what else to do.
Also, I can't change the PageMaker6.5 apples to any other color, they are stuck on spot color.
The problem seems to be I am not targeting the black part of the image itself, yet I can not figure out how to do so. The images are made in Photoshop 6. Thank you for any help you can give (I also have an import jpg file, which has the exact problem of any color changes are to the white background (fill) or the stroke. But again I am unable to change the black part of the image).

Thanks, in an odd way it worked...
I dragged like you said. The entire frame became the Spot Color (meaning I could no longer see anything but a large solid block of Green). So I went to Edit->Undo, and it undid the large solid block of green, leaving the previously black image now green, exactly what I wanted. While I don't understand why the Undo command fixed it, I'm happy with the results.
Thanks.
Edit - I did it again to another apple, this time it worked perfectly without the undo command. The first time, my cursor became a hand. The second time, it stayed an arrow with a small block under it. Regardless of what happened the first time, thanks again.

I'm trying to change a color setting in bridge

Similar Messages

Maybe you are looking for