I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

Similar Messages

My external hard drive will no longer connect to my macpro......any ideas on how to solve this problem??

My external hard drive will no longer connect to my macbook pro via FW800........Any ideas on how to solve this??

Reset the SMC, see this Apple note: http://support.apple.com/kb/HT3964
Also reset the PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
In most cases, those two actions will fix the port issue. If it's still an issue, you may need to see if the external hard drive can connect to another system, to ensure it's not having problems.

HT203167 got a new mac pro, went to sync in 20 songs from i phone, only one got there. my phone is saying all 20 are on i cloud, any ideas?

I recently had my Dell crash, I had hundreds of songs lost, but did have roughly 30 songs that I had bought on I Tunes on my I Phone. I bought a new Mac Book Pro, went to sync in my I Phone to the MacBook Pro to get those 30 songs. Only one song went through. Any idea of how to get the rest? I know that when I had my I Phone, I repeadately forgot my I Tunes password and had to make new ones, don't know what my username was, I do now. Also, I bought the majority of those songs with a different I Phone than the one I currently have. Any advice would be appreciated, the last four on my credit card is 8514

How exactly was the music transferred to the new computer?
The correct way is to copy the ENTIRE iTunes folder from the old computer to the new computer. If it was transferred properly there are no issues with syncing to the iOS device.

I received this error: "iTunes could not connect to the iTunes Store. An unknown error occurred (-3212). Make sure your network connection is active and try again." We are connected. Any ideas on how to solve this?

I downloaded iTunes. I was going to put an MP3 lecture on iTunes so I could put it on our new iPad but I got the message:
"iTunes could not connect to the iTunes store. An unknown error occurred (-3212). Make sure your network connection is active and try again." I was able to get on this site so I know the connection is fine. Any ideas how to fix this?
Thanks.

Hello Buck
If you are having issues with the iTunes store, check out the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I am battling to connect my MacBook Pro to my new Samsung D7000 Smart tv. Both the tv and the macbook are on the same wireless network. Any ideas on how to solve this problem?

How do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?

My suggestion is to get the magic trackpad, magic keyboard and magic wand and connect a DVI to HDMI cable and use the MBP in clamshell (closed) mode. This will allow you to run 1080P into the TV and essentially use the Samsung as a HUGE monitor. At that point you can use the TV itself to display whatever you want off the laptop or simply switch inputs and stream stuff out of smarthub as usual. I tried to connect mine via allshare (by the way samsung has the free allshare download of software for the PC but not the mac.) and while i DID have some succes (under windws) i had to run a non secure connection and in the end the cool factor wasn't worth the hassle, to me anyway. It was sort of a "cool i did it" now why bother..... Hope this helps.

HT201412 My home button does not respond on my iPad 3. Any ideas on how to solve this problem?

I just received a new iPad 3. The home button does not respond. Any ideas?

return it to have it checked for malfunction. Might be a transport defect . ( Although I never heard of such a severe case on brandnew Apple Hardware )

My iMac 20 inch 2.4 has developed a very annoying flicker. It looks like somebody is messing with the brightness but than really quick. Any ideas on how to solve this problem ?

My almost four year old iMac 20 inch 2.4 ghz Intel Core 2 Duo has recently been giving me a headache. The screen is flickering a lot. It looks like somebody is messing with the screen brightness at a really fast rate. I have no idea what it could be but have tried to recalibrate the screen, stopped certain dashboard apps, even changed the desktop picture and screensaver. Has anybody else had the same problem or could somebody help me in getting rid of this flicker. It feels like it is a software issue as it happens intermittently rather than continuous.
Pleas help me !
Gersom

My almost four year old iMac 20 inch 2.4 ghz Intel Core 2 Duo has recently been giving me a headache. The screen is flickering a lot. It looks like somebody is messing with the screen brightness at a really fast rate. I have no idea what it could be but have tried to recalibrate the screen, stopped certain dashboard apps, even changed the desktop picture and screensaver. Has anybody else had the same problem or could somebody help me in getting rid of this flicker. It feels like it is a software issue as it happens intermittently rather than continuous.
Pleas help me !
Gersom

When Firefox begins, I get the message that Firefox has stopped working. Making it impossible to do any of the troubleshooting procedures. Turning off computer and rebooting do not help. Any ideas about how to solve this problem?

Everything was working fine and when I switched from email back to Firefox the problem started. Nothing new had been added before it experienced this problem. I also have IE on the computer, so I can get to this site.

You need "sysinternal's process explorer", it is free and can replace the Microsoft process explorer, that you get by "CTRL+ALT+DELETE". Either program will allow you to kill the instances of FF that didn't die as they should have, when you closed them. Sysinternal is easier to use, it is a graphic display with many options. Do not push "CTRL+ALT+DELETE" twice unless you want to reboot, that is its default behaviour under Microsoft.

Have just downloaded the new iSO6 and now my facetime will not work. I have checked the settings and all looks fine. Any ideas on how to solve this problem?

Have just downloaded iSO6 to my ipad and now facetime will not work properly. It will take incoming but will not allow to make a call. Could anyone offer suggestions to the problem please?

Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari

Adobe Acrobat Standard 9.5 Install Error: "Error applying transforms please ensure specified transform paths are valid". Any ideas on how to fix this?

I had Acrobat Standard 9.5 on a laptop that broke. Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”. Any ideas on how to fix this?

Rahul,
No error numbers other than the message I mentioned previously.
I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
When I unzip the Acrobat file this is what is in the setup ini file:
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroStan.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
Thoughts?
Thanks again,
Tom

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari

Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found. Do you have any idea on how to bypass this authentication ?? Regards, Gilson

Hi ... After I have installed IOS 6 on my Iphone 4, the WiFi connection is trying to authenticate in the Apple site but the page is not found.
Do you have any idea on how to bypass this authentication ??
Regards,
Gilson

Hi...
After I have wait for 30 minutes without do anything, the wifi interface worked.
I don't know if Apple could fix the issue on their site or the reboot of the Iphone solved the problem.
I'm installing IOS 6 on the Iphone 4 of my wife. Let's see if the behaviour is the same.
I will post the informations after finish the installation.
Gilson

My iPod touch 4th gen iOS5.1.1 can't be recognised by my computer and I have tried different cables and usb ports but nothing has worked. The iPod is brand new and was only opened today. Any ideas on how to fix this?

I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables. There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?

Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad.

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

Similar Messages

Maybe you are looking for