I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

My current softward is: Mac OS X Lion 10.7.5 (11G63)
When I attempt to use the Filezilla connection wizard I get the following message:
Connecting to probe.filezilla-project.org
Response: 220 FZ router and firewall tester ready
USER FileZilla
Response: 331 Give any password.
PASS 3.7.1.1
Response: 230 logged on.
Checking for correct external IP address
Retrieving external IP address from http://ip.filezilla-project.org/ip.php
Checking for correct external IP address
IP 27.0.19.56 ch-a-bj-fg
Response: 200 OK
PREP 52470
Response: 200 Using port 52470, data token 1871898076
PORT 27,0,19,56,204,246
Response: 200 PORT command successful
LIST
Response: 150 opening data connection
Response: 503 Failure of data connection.
Server sent unexpected reply.
Connection closed
When I attempt to login Host/Username/Password myself I get the following message:
Status:          Resolving address of amyhoney.com
Status:          Connecting to 184.168.54.1:21...
Status:          Connection established, waiting for welcome message...
Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response:          220-You are user number 12 of 500 allowed.
Response:          220-Local time is now 04:05. Server port: 21.
Response:          220-This is a private system - No anonymous login
Response:          220 You will be disconnected after 3 minutes of inactivity.
Command:          USER 5475****
Response:          331 User 5475**** OK. Password required
Command:          PASS ********************
Response:          530 Login authentication failed
Error:          Critical error
Error:          Could not connect to server
Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
HELP!!

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Similar Messages

HT204380 My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this

My iPhone and iPad are set up under the same account and when I try to FaceTime with the iPad or vice versa it says face time is busy and will not connect, how do I fix this

I can call my ipad with my iphone alll the time. That's how I check up on my kids at home when I"m at work. You just set up to your iphone's facetime setting with your phone number and set up your ipad's facetime settings with your apple id (in this case it's your email)

I'm trying to import contacts from Outlook to mac address book. I've exported as a CSV but when i try to open with the Address book import tool, the file is greyed out and can't be imported

I'm trying to import contacts from Outlook to Mac address book. I've exported as a CSV but when I try to open with the Address book import tool, the file is greyed out and can't be imported. Any ideas?
Thanks,
Ian

If you can't get the exported .csv file to work you might consider using Migration Assistant: http://support.apple.com/kb/HT2518, particular if you need to move more than just your contacts. There is some granularity in the options on what to transfer but I'm not sure if you can choose to just your migrate contacts.

I transfer all my games from my iphone to my pad, but the game progress is lost.... i signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???

I transfered all my games from my iphone4s to my ipad, but the game progress is lost.... I signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???

Hi bubbles213,
The best way to move information from one iOS device to another is to back up the device using iCloud or iTunes (or both), and then restoring the new device from it. This article will walk you through the steps:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Cheers,
- Judy

When I try to work with the publish window of lightroom cc, I am told that I do not have permissions to perform operations (remove picture, etc.)

When I try to work with thhe publish window of lightroom cc, I am told that I do not have permissions to perform operations (remove picture, etc.). I also notice that when the particular picture is selected, another show in its place, and I cannot change the collection.

To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Have an Epson workforce 600 worked fine until new router and Lion installed. Now when I try and scan with the all in one I get a "POWER PC APPLICATIONS ARE NO LONGER SUPPORTED" and my IMAC does not recognize that the Epson is a multi function printer.

Installed a new router. Installed Lion. Have an Epson Workforce 600 multi function printer. Two problems.
1. I cannot get Lion to recognize that the Epson is a multi function printer. There is no scan option on the "print/Scan" popup window.
2. When I try and use the epson scan utility I get: POWER PC APPLICATIONS ARE NOT LONGER SUPPORTED.
I have tried EPSON support with no real luck as they say it is Apple upgrades that are the problem.
Apple support was quite rude..said it was not their problem and that I should call epson. Told the I did but it made no difference just got the same reply.
Have no idea what to do.....seems I cannot find out which multi-function printers Lion supports.

daolbuzzard1 wrote:
Epson Workforce 600 multi function printer
Not to give you another run around, but you need new printer drivers from Epson for your printer so it works in Lion.
Now it could be that they are working on it, or that they could have decided not to provide new drivers in order for you to force upgrade.
The only thing a user can do is decide very carefully BEFORE upgrading to a newer Apple operating system, make sure that all their current hardware and software works and make a decision for themselves.
Since you upgraded to Lion, you can go back to Snow Leopard and your PPC software will work.
Do you need instructions?

I cannot get the i to work when i try to capitaliize with the left shift key

When i try to use the i key and the left shift, nothing appears-so to use the first person "I" i need to use the right shift. This started after i had had my computer for about 3 weeks.-what gives? is it a setting, or do i need a new keyboard?

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(59274)

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESK

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud Connection

Hi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit

Hello,when i login with the account of my wife it does not unable her music files.could you help me please?

I have an imac osx 10.9.5 and 3,4GHz intel core i7
When i login with the account of my wife in itunes, it does not show me the music files from her library,but only the music files from mine.
What do i have to do?

i mean log into iTunes Store,but i have solve this issue by myself.
Thank you for your support.

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

Why can't i login with the account i just created???? I am missing an important session!!!!

why can't i login with the account i just created???? I am missing an important session!!!!

Hello ljp1,
What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
Try going through these troubleshooting steps to see if it helps resolve the issue.
http://goo.gl/TTH2s
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Can't Login with the User Administrator or the User root

Today i Download the tarantella secure global desktop version 4.2.977 when finish say i can login with the username Administrator and the password of root but i can login only give me again the windows to enter username and password what can i do with this

this is a bug with the 977 build. new build was release today to address this issue.
http://swforum.sun.com/jive/forum.jspa?forumID=217
as a quick workaround, copy /etc/pam.d/passwd file to /etc/pam.d/tarantella

HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?

HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?
I understand the instructions to create a new account id (apple id) from the old aol account. However, does this mean my purchases will be split into 2 accounts; or does the fact that I currently see everything under my apple id (regardless of the purchased by username) mean this will all still appear in my current account as it does now?

You see them where when you login your non-AOL account ?
If you currently have two accounts (the AOL username account and an email address account) then you will continue to have two accounts, and nothing should change when you update the AOL account to be an email address (apart from how you access that account).
You will just be renaming the account to have an email address for accessing it, not creating a new account.

How to conf in Hyperion, so the system couldn't login with the same user

Hai.....
how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
rgds
uka fp

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

I'm trying to use FaceTime but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration. Is there anything I can do?

I'm trying to use FaceTime from my IMac OS Version 10.8.5 but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration. Is there anything I can do?

There is no official public documentation of that alert as far as I know.
If you're trying to sign in to FaceTime, try to sign in to iMessage in the Messages application, or vice versa.
Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative.

I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

Similar Messages

Maybe you are looking for