I'm trying to install CS2 on a mac OS X 10.9.4 but get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported.
I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?
It means what it says - it's not compatible with modern Macs. You need to buy a current version.
Mylenium
Similar Messages
-
I want to install a never used CS 2 SW pack from my old compan,y but get the msg “You cannot open the app “Adobe Installer” because PowerPC applications are no longer supported". How can I install this so far never installed, expensive SW?
you need to use a compatible computer,os. eg, System requirements | Photoshop
-
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app. I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported." Is there a work around?? Thanks in advance for any help that can be provided.
The only workaround would be to purchase the current version of iLife apps from the App Store.
Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application. -
when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.
The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2) -
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?GrandmaGG wrote:
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?
Do you have iLife '11 Discs or did you download it from the App Store? -
Tried to install a new game that I bought (Xiii) for my MBP. All system req have been met and exceeded, however when trying to install it I get an error message saying "You can’t open the application “XIII Install” because PowerPC applications are no longer supported."
I have since read online that the operating software Yosemite has got rid of PowerPC applications, meaning I can't install my new game.
Is there anything simple that I can do to get this game to work. I'll be gutted if not as I have opened the game therefore the shop will not give a full refund, I'm sure .
Regards
SimonA lot longer ago than that. PowerPC apps haven't been supported since Lion, 10.7.x.
You may have just purchased the game, but the developers obviously haven't kept up to date with the requirements for newer versions of the Mac OS.
You have three options, depending on how old your Mac is.
1) If it were ever able to boot directly to Snow Leopard, you could create a separate partition and install SL onto that partition. Make sure to turn on the option during the installation to install Rosetta. That is OS X's PPC emulator.
2) If your Mac is too new to install Snow Leopard, then you can purchase and install Snow Leopard Server within a VM, such as Parallels, VirtualBox, or Vmware.
3) Use a separate older Mac for running outdated software. -
I spent ages digging out the disc as it was installed on my old iMac and it clearly states that it does not require a Power PC.
I also tried upgrading to imovie 11 but all my old movies won't import.
I've heard from others in these forums that iMovie 6 is the only way to resolve this and people have described how they are running it on Lion.
So how can I get iMovie 6 to run?Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)
You will find that the above applies to any PPC-only software including old iLife. You can purchase the new iLife versions on the App Store. -
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody. -
I am trying to install print controller and printer -but get this error message when trying to use the installer:
You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
Any help and/or suggestions would be greatly appreciated
Thanks!I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c -
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"
Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales.. -
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
GiraffeHero wrote:
I just got a new MacbookPro using Mavericks OS. When I tried to load Filemaker Pro I got this message: You can't open the application Filemaker Pro.app because Power PC applications are no longer supported. This is a disaster.
Ralph Landry1 wrote:
The only viable solution is to upgrade to the latest versions of the PPC legacy software that will run under Mavericks.
Except for the other viable solution:
If you are unable or unwilling to upgrade to a version of Filemaker that runs natively under Mavercks, you can run your existing version of Filemaker by installing Snow Leopard Server into Parallels:
[Click on image to enlarge]
Installing Snow Leopard Server into Parallels for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564
Maybe you are looking for
-
Hi, I am using ME2L transaction for pulling PO report. Can some one tell how transfer this data in tabuler format of excel. I have transfered the output from spool to excel it does not seems to be working. Can anyone guide me or give me an transactio
-
TV Out stops after 1 minute of playback
I have a Nano 4g and have problems with the TV out function. I can get the TV out to work with the 30pin video component cable, but after 1 minute of playback the Nano shuts down and the video stops. When I go in to restart the video the video out to
-
Bonjour everyone! This is a problem that i'm having major difficulty with, I've just imported about 30gb's worth of video (i know right?) and it's really bringing the amount of space I have on my HDD down, so I was wondering if there's a way to put a
-
Hi all, Hope you guys can help me out with this issue. I have 3 level racks and at the 1st level all the bins should allocate a specific material say I have 5 bins and materials A, B, C, D, E, should be placed in there in that order say 1, 2, 3, 4, 5
-
Message types for ALE distribution
Hi, I am working on SRM 7.0. I need to copy the org structure from one client to another. For that I am using the ALE distribution model. Can anyone please let me know all the message types reqired for transferring the org structure. Thanks, Bhakti