I'm trying to reset my ipad from ITunes after i disabled it but it keeps telling me that it can't complete it because it has a passcode please help!!

I'm trying to reset my ipad from ITunes after i disabled it but it keeps telling me that it can't complete it because it has a passcode please help!!

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Similar Messages

  • TS1424 I keep trying to make purchase on my games but it keeps telling me that it can't complete punches, cant connect to itunes store, connection error.... This is an continues issue I'm having. Why?

    I have 2 iPads and on my way of getting another, I use the same iTunes account for them both is that an issue? If yes! Why?

    This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum.
    Note, however, that iTunes has never been supported on the 64-bit version of Windows XP, so you're on your own to attempt to get it working.
    Regards.

  • I am trying to set up a new iTunes account on my PC, but it keeps telling me I'm not old enough. I'm 35 years old! Any suggestions?

    I am trying to set up a new itunes account on my PC and whe I fill out all the information and hit submit, it says that I'm not old enough to have an account.  I've tried it with difference birth years, but still get the same response.  Any suggestions?

    The SMTP settings are separate from the POP or IMAP settings within Mail.app (which can be a little confusing), and the SMTP settings are incorrect.  That could be some combination of the username or password, the SMTP server name, the TCP port, whether or not SSL is in use or not.  It's more common to have SSL enabled.  All have to be correct.  The required SMTP server settings do vary by mail provider, unfortunately.  You can use Connection Doctor to get more details on the particular error; Window > Connection Doctor, then open the drawer for a look at additional details.  If you're not able to resolve the error from that output and from the mail provider's available documentation, and establish the connection, please scrub any personal details from the detailed diagnostics, and post that output here.

  • We are a family of 6 - 2 parents and 4 children.. We have an iMac, 3 macbooks, a Macbook Pro and an iPad. We all want to be able to share the itunes library, but it keeps telling us that it can't authorize more than 5 computers.  What can we do???

    How can we home share with more than 5 computers?? We are a family of 6 and each has his/her own computer.

    You can't. But iDevices don't count. So you should be able to share the 5 computers.

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201210 I am trying to update my ipad 2 but it keeps telling me that it isn't eligible for the requested build how can i fix this problem

    I am trying to update my ipad 2 but it keeps telling me that it isn't eligible for the requested build how can i fix this problem

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Copied from this website.
    http://support.apple.com/kb/TS3694#error3194

  • I have downloaded Lightroom5 and Photoshop CC2014 last week. I'm trying to transfert a photo from Lightroom to Photoshop for treatment but Photoshop keep crashing.

    I have downloaded Lightroom5 and Photoshop CC2014 last week. I'm trying to transfert a photo from Lightroom to Photoshop for treatment but Photoshop keep crashing. What is the problem?

    I have downloaded Lightroom5 and Photoshop CC2014 last week. I'm trying to transfert a photo from Lightroom to Photoshop for treatment but Photoshop keep crashing. What is the problem?

  • \Hi, \I am trying to dowload some films from itunes to a new laptop but I am getting a message telling me I need to authorise this computer.....how do I do this?

    \I am trying to download some films and TV programmes from Itunes to a new laptop but I am being told that I need to authorise this computer. How can I do this?
    Thanks/

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • I've synced iPad with iTunes, but it keeps telling me that there are purchases on my iPad that need to be transferred?

    I've synced iPad with iTunes, but it keeps telling me that there are purchases on my iPad that need to be transferred before I can run the iOS update or I will lose them.  What should I do?  How do I figure out what purchases have not been transferred?   I went into iTunes on my Mac and ran "Check for available downloads" and I still get same message. 

    The 'cehck for available downloads' checks if there is anything in the store that you haven't yet downloaded, it won't copy anything from the iPad. Have you tried doing File > Devices > Transfer Purchases ?

  • HT1351 Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".

    Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".iTunes is the only thing open on my computer so I don't understand what this could mean.  If anybody could help me out that would be great. Thanks

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • HT1339 I have tried all the troubleshooting tips online but my Classic ipod doesnt work. My Itunes keeps telling me that it cannot restore the ipod because the ipod is busy. What can I do?

    I have tried all the troubleshooting tips online but my Classic ipod doesnt work. My Itunes keeps telling me that it cannot restore the ipod because the ipod is busy. What can I do?

    Have you tried rebooting for the Mac and iPod to see if that helps? To reset the iPod, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    It wouldn't hurt to also try plugging the iPod into another USB port and use a different USB sync cable.
    B-rock

  • HT1918 I ve just bought a gift card from Belgium but I m living in Netherlands and I have an Iphone 4S subscription in Netherlands. What can I do to use the gift card? It is telling me that I can't use it because it's from Belgium.

    I ve just bought a gift card from Belgium but I m living in Netherlands and I have an Iphone 4S subscription in Netherlands. What can I do to use the gift card? It is telling me that I can't use it because it's from Belgium. i find it really stupid not to be able to use it?!
    please give me a hand over here
    plus i ve bought the gift card from a supermarket so its kind of hard to get my money back now :|

    Gift cards are country specific.  You cannot use them in another country.

  • Trying to sync my iphone with itunes on my new pc and it is telling me that my comp is not authorized. how do i authorize it?

    trying to sync my iphone with itunes on my new pc and it is telling me that my comp is not authorized. how do i authorize it?

    Follow the directions here:
    https://discussions.apple.com/docs/DOC-3141

  • I am trying to compress an 18GB quicktime movie for youtube/vimeo sharing but Compressor keeps telling me it's failed. Any ideas?

    I am trying to compress an 18GB quicktime movie for youtube/vimeo sharing but Compressor keeps telling me it's failed. Any ideas?

    make sure you have sufficient drive space on your target drive.  Make sure you have a minimum of 15% free space on your startup drive.  What format is the original quicktime movie?

  • Hi, I'm trying to to export/import a XML file in the CP8, but it keeps telling me "Cannot import XML".

    Hi, I'm trying to to export/import a XML file in the CP8, but it keeps telling me "Cannot import XML".  To solve the problem I already tried following things:
    1. Exported the file and then attempted to reimport the unedited file into a copy of the CP-project
    2. Edited only a single character (using Notepad++) and once again tried to import the XML-file in the project.
    3. Renamed the XML-file and the CP-project.  Is there anyone who has solved this problem? 
    /J

    Pasted this same reply/reference in your LinkedIn group post...
    Try this thread (re: Run As Admin)
    Import Captions in Captivate 5 - not working?

Maybe you are looking for

  • Hiding a intermediate node in a Jtree without hiding leaf nodes

    Hi who can help me out of this problem. What my prob is dat i m interrested in hiding few intermediate nodes in JTree without hiding their children. Thanks Rakesh

  • How to use Cinema4D lite with no opening After Effects CC ?

    How to use Cinema4D lite with no opening After Effects CC ? Is that possible ? Open a 3D object Photoshop-type in After Effects CC (without C4D) It is also possible? thanks xav

  • Speical chars in xml

    i got text with the char for example(marked in red) i try to parse the content that inside the xml select cast(XMLMessage as XML).query('MSG/MESSAGE').value('.', 'nvarchar(MAX)') as Content from table1 where id=10 and i get the error XML parsing: lin

  • Exit from an embedded component

    Hi, I have 2 components, C1 and C2. C1 has got 2 views of its own, after which C2 is called. So, in the navigational diagram of C1's window, C2's interface view is embedded and its inbound interface view plug is fired on an action in C1's view. All w

  • I have a problem with updates

    I want to update my Flash player but it installs the SAME version than the one I've got already! SOMEBODY HELP ME PLEASE!!!!!!!!!!