I'm trying to set up a canon wireless printer (MG3220) to my iPad and iPhone. I'm using a Motorola modem SBG900. I keep getting the message "no air printer found". What can I do?
I'm trying to set up a canon wireless printer (MG3220) to my iPad and iPhone. I'm using a Motorola modem SBG900. I keep getting the message "no air printer found". What can I do?
Update printer with the latest firmware. They need the latest firmware to Airprint.
Similar Messages
-
I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?
Hello Main Event,
Thank you for using Apple Support Communities!
I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
Take care,
Sterling -
I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Continuing from the original question above...
The full error message reads:
Application Error
General Exception
Name: com.aurigma.imageuploader.ImageUploader
ClassNotFoundException: com.aurigma.imageuploader.ImageUploader.class
This seems to be tied in with an update to Java 7, but my software won't allow me to proceed w/o the update. As soon as I update Java, the system gets corrupted and I just continually get the above message. I've done all I know to do, and I'm on my 4th 'restore', all the way back to June 14th. I really need this resolved, as my livelihood depends, in part on uploading pix I take in the field.
I'm using a 2.3Gh dual-core PC w/ 4 Gs of RAM on a totally updated WIndows XP operating system using Mozilla Firefox.
PLEASE, if there's a fix readily available, or if you can help me find one, I would be most seriously grateful.
Thank you!!!Does this software run in Firefox, or is it a stand-alone program?
Assuming it is a stand-alone program:
If you need to stick with an older version of Java until that software is updated, you can disable Java in your web browers to protect against its vulnerabilities. Naturally this will disable some website features (for example, this uploader on sites that use it). To disable Java in all browsers, you can use the Java control panel, security tab and uncheck the box to use Java in browsers.
(I don't know whether that takes effect immediately or after exiting and restarting the browsers.) -
32 bit mode not checked so guess this is a problem that others are having. How do I fix it Anybody managed to resolve this ?
Hi No I am on 10.9.2 I spoke ot apple support and updated itunes to the latest version but am still getting the message Any ideas?
-
when trying to download photos from my digital cameras I keep getting the message that pics can't be downloaded because of an "unrecognizable format". It shows that they are all jpeg files. One camera is a Canon, the other a Panasonic. I have had these cameras for a few years and have never had a problem downloading.
I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you -
I am so confused. I just downloaded Itunes. I set up an Apple ID with a password. Now I want to buy a song. I can't do it. I keep getting the message: "This Apple ID has not yet been used with the Itunes Store. What am I doing wrong?
You haven't opened an account with that Apple ID in iTunes. Open iTunes and log in. A dialog will appear in which you need to enter your Apple ID and/or password. Below it you should see a link for creating a new account. Click on that link to get started.
-
i cant create a new email address as i keep getting the message Email Not Valid,yet i am doing nothing wrong! Help
Who is the email provider? Not all accounts can be set up as POP3
-
I'm trying to upgrade to iTunes v 10.6 on a windows vista pc and keep getting the error, "Invalid Drive/E". What do I do to get past this?
Open a Windows Command prompt, e.g. Hit Start > Run, type in CMD and press OK.
Type in SUBST E: C:\<enter>
This will map E: to C: until the machine is restarted or you enter SUBST E: /D at the command prompt. Now you can try uninstalling or upgrading the software again.
(If upgrading software which lets you choose a location, install the software in the default location, not on the E:\ drive.)
See here for more info.
tt2 -
I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update." I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?
Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!
-
Trying to download my pictures to IPhoto with my new Nikon S6300 camera keep getting the message the file could not be imported as the file is unreconizable format. I had no problem with my old Canon camera. Please help
I am having the same problem which has happened very infrequently before. Generally it's one photo and happened when my battery died.
However today I tried to download six photos.
None would download including several others for a total of 21 that would not download.
Since I had just installed a new powered hub and added three new external 4T hard drives, I got concerned that it was the hub. Then got really worried that I'd have problems with the data I have been backing up.
However following this sequence of events, I've determined it's not the hub, but still don't know what is causing the problem.
(1) Put a fresh battery in the camera - same results
(1.5) Used a different port in the new hub - same results
(2) Put the card in the card slot in the back of my iMac - no problems except that one image I knew about last week. The six new images imported.
(3) Tried again using the cable - still same error
(4) Changed cables - my husband has the same camera - still same error
(4) Put the card in his camera with his cable - still same error
(5) Put the card in a card reader and used the same slot in the new hub - no problems - same one wouldn't import but message that there are no new photos to import.
(6) Moved the offending one image to the Trash while the card was in the card reader
(7) Put the card back into my camera and used my cable. iPhoto had no error and displayed the message there are no new photos.
Conclusion:
Not the camera
Not the cable
Not the hub
Must remove bad photo from the card
However, I have not had to do that before. I went through several imports on vacation when there was one bad image and just ignored it each time.
Any idea why this is happening now?
Thank you -
I am trying to download EndNoteX4 but keep getting the message 'no mountable file systems'. What does this mean and how do fix it?
jenitsallgood wrote:
I am really unsure as to what I am doing wrong.
Maybe you are doing nothing wrong and the problem is with the disk.
Use SuperDuper or CarbonCopy Cloner
to clone your system to an external drive.
Then boot from your DVD go to Disk Utility and choose your entire drive > top icon in DIsk Utility.
Go to Erase tab. Choose format: Mac OS Extended (Journaled). Click on erase. Now, install Lion and when you get to setup assistant choose to migrate from your external drive.
This is slightly different than baltwo described and slighly longer but if there is any corruption on your disk a more through way to go, IMO.
What baltwo is saying is to clone your volume over to an external hard drive with CCC reformat and clone it back. This will defragment the files and make them all contiguous but will not address any directory problems.
Your choice. You can do it one way, then the other if it doesn't work out for you. -
I keep getting the message that my start up disc is almost full, what can I do?
I keep getting the message that my start up disc is almost full. What can I do?
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
I keep getting the message"an error occurred while trying to access the service". does anyone know what i need to do to resolve this problem. I am trying to convert a PDF file for ms word?
Adobe Reader is free; but you may have paid for the ExportPDF service.
Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
[topic moved to ExportPDF forum] -
I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!
cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.
Maybe you are looking for
-
Querying up AR Customer OA page in read-only mode for a Single Customer
We are building a Custom Form in which associated Customer <defined in AR> would be queried up. Now we want to give an option to the User to view the complete details of the Customer. We would be giving a menu option in Tools 'View Customer' thru whi
-
IBAN number not getting updated in ECC via IDOC CREMAS05
Hi Experts We have a business scenario where the vendor is created in MDM and the data is sent to PI from where the IDOC posts vendor master details to relevant tables in ECC. The IBAN information is provided in the IDoc in segment E1LFBKM-IBAN. How
-
Using iMovie 4. I have already done this movie, from video clips from my camcorder. I have saved the clips, put them on an external drive, but now I had to bring them back onto my desktop to make another version. Some of the clips will import, but mo
-
So I've noticed my MBA has been getting up to 90 degrees+ while gaming (I know these aren't meant for that, but hey, it works so it will). Anyway, I was wondering if such high temps was healthy and if they are okay, and if they are fine, is it health
-
I have lost my iPhone 4S. I did not have the find my iPhone application on my phone. Is there any means of, finding my handset and retrieving photos and contacts?