I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth
I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!
update directly, Product updates
Similar Messages
-
I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
MikeHi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support -
Hi All,
I'm trying to deploy SCOM 2012 R2 agent onto a domain controller and I get the following error "Product: Microsoft Monitoring Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.)."
I've installed the agent successfully onto 4 other domain controllers with out any issues.</p><p>The domain controllers are all VM's running on VMWare and are Windows Server 2012 R2.
I've rebuilt the Perfmon Counters based on this article: https://support.microsoft.com/en-us/kb/2554336?a=wsignin1.0
I've also enabled verbose logging on the msi installation:
InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft Monitoring Agent\Agent\
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft Monitoring Agent\Agent\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
Any help on this would be great.Hi Stefan,
I've successfully installed the agent. The server needed a reboot after fixing the corrupt perfmon counters.
I know have a issue with the agent on the domain controller. It kkeeps on greying out and have used hslockdown to allow the local system access by using the following command.
HSLockdown.exe "ManagementGroupName" /A "NT AUTHORITY\Authenticated Users"
Further digging into the issue I see in the SCOM Management Server the following error "The entity servername is not heartbeating"
Written a SQL query to gather more information. SQL query I used is:
SELECT
ME.FullName,
HSO.StartDateTime AS OutageStartDateTime,
DATEDIFF (DD, hso.StartDateTime, GETDATE()) AS OutageDays,
HSO.ReasonCode,
DS.Name AS ReasonString
FROM vManagedEntity AS ME
INNER JOIN vHealthServiceOutage AS HSO ON HSO.ManagedEntityRowId = ME.ManagedEntityRowId
INNER JOIN vStringResource AS SR ON HSO.ReasonCode =
REPLACE(LEFT(SR.StringResourceSystemName, LEN(SR.StringResourceSystemName)
– CHARINDEX(‘.’, REVERSE(SR.StringResourceSystemName))), ‘System.Availability.StateData.Reasons.’, ”)
INNER JOIN vDisplayString AS DS ON DS.ElementGuid = SR.StringResourceGuid
WHERE (SR.StringResourceSystemName LIKE ‘System.Availability.StateData.Reasons.[0-9]%’)
AND DS.LanguageCode = ‘ENU’
AND ME.FullName like ‘%SERVER NAME%’ –Change name here or leave %% for ALL SERVERS
ORDER BY OutageStartDateTime
This gives me the following reason behind the failure : "The heartbeat from System Center Management Service is missing."
Have I missed anything? The agent is running fine, however SCOM is reporting that the heartbeat is missing.
Any help on this would be great. -
I have a website; www.designed4submariners.com. On several pages, I have created links to images which are located in a upload file folder. Each time I click on one of those links on the active website (using Firefox as browser), a dialog box appears asking me: What should Firefox do with this file? Beneath the question is a pull down menu which has "TextEdit (defualt)" selected next to a radio button. The image file will open in a browser window when I select Firefox from that pull down menu. I can not tell Firefox to open all similar files using Firefox. How can I resolve this issue as I must go through the same process each time I attempt to open one of those links.
Your response identifies the issue exactly! My website is hosted by GoDaddy. I have forwarded your linked information to their tech department. The URL below my signature is the site having the problem I've outlined when attempting to access linked images.
Thank you
Vincent G. Flaherty, Principal
Hamilton 1:1 Communications, LLC
410 Fern Road
Orwigsburg, PA 17961-9210
Tel: (267) 261-8693
Designed for Submarines:
http://www.designed4submariners.com -
Photoshop CS5.5 freezes after 10 seconds of use every time
Hey everyone,
So weve been going nuts over this! Essentially I work for a big company, and we all have company laptops that we use to work on, which all have essentially the same programs installed on them. I have a Dell Latitude E6530, its running Windows 7, has a Corei7 vPro inside. Im running Adobe Production Premium CS5.5, and all the programs work perfectly fine (like I use Flash and Illustrator as well with no issues.) except for Photoshop.
When I boot up Photoshop (either version, 32 or 64), Ill be able to use it for about 10 seconds and then it will freeze. It will stay frozen until I actually go in and Task Manager the program off. It does not crash. This literally works with anything I do in Photoshop, I could literally have nothing open and go to the Preferences menu, and it will freeze there. I have tried looking up this problem online and I havent seen it as specified as this, I have seen it where people do something specific, like go to save, and it freezes AND crashes. Mine just freezes after ANYTHING I do after 10 seconds of use.
More about my set up. I have 3 monitors linked to my laptop. I initially thought maybe cutting it down to 2 or 1 might help, because it seemed to yesterday for a moment, but today I tried it and I had the same issue. I also have Symantic Encryption on my laptop, but so does everyone else and they can all run Photoshop completely fine. Weve updated the drivers and updated Photoshop and everything to the latest versions.
Does anyone know if Im just doing something very simple wrong that Im overlooking? I have seriously never had an issue this bad with Photoshop before. Let me know if you need any other information. Thanks for your help!Yes, basically we have all the default fonts installed on our computers, but we use a program called Universal Type Client to get the fonts we need, and UTC grabs fonts from a server and temporarily makes them usable on our computer. But everyone has this software so I dont think that would have anything to do with it.
Could it possibly have something to do with my Video Drivers or Graphic Cards? Our tech guy mentioned it was strange that my computer had two different things (I believe he said I have a CORE i7 vPro and Nvidia NVS 5200M or something and that they may be competing?) or the amount of monitors Im using? -
Windows 7 SP1 x32 bit fail to install Windows SP 1 with error code: 0x80070643/0x800F0829
Hi All,
I'm unable to install MS Service Pack 1 in Windows 7 Professional 32 bit, failing with error code: 0x80070643/0x800F0829.
1. Remove Symantec Endpoint Protection.
2. Run System Update Readiness Tool
3. Install MS SP 1 and fails.
Here is the log file.
https://onedrive.live.com/redir?resid=7627981B9D84362B%211869
Thanks,Hi,
I suggest you download the full package, and try to install it in Clean boot Mode:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-in/download/details.aspx?id=5842
If the issue still persists, please try following command to repair Windows:
SFC /scannow
You can also try the In-place upgrade to clean your Windows and install the update again:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Kate Li
TechNet Community Support -
I'm hoping someone can talk me through this issue; I have not updated in over a year! I am using a Windows 7
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
How do I tell photoshop to stop opening the same document every time I start Photoshop CS6?
Hi all,
Each and every time I start up Photoshop CS6 (running the latest version I think....13.0.1 x64) on my Mac Running 10.7.5
the same document opens up. As if it thinks it crashed and needs to recover it. Im a member of Creative Cloud in case that matters.
I have saved the document and closed it properly and yet - it returns every time I start up the program. Can anyone help?
Its not a killer issue but extremely annoying.
thank you.
-wendy-Yeah - literally can't find anything remotely similar. If anyone knows where I might find the thread to a fix I'd be mightly helpful.
Haven't a clue how to word to it any differently to try to find the answer. -
When I start my computer (Windows) I find a message window on my Home Page (AOL) that tells me somethinglike "It is recommended that you up-date your software to Firefox 4.0 (?)". When I click on the button to up-date, it tells me that it is "connecting to server". Then I watch as the green "up-dating" bars flit across the screen...and flit across the screen...and flit across the screen...and it just keeps going.
Then I click on a button that says "Hide", assuming that the up-date is continuing to do its magic while I am busy elsewhere. This gives me a minimized button that is labelled "Software Update". When I click on that to maximize it again, I find that the "connecting to update server" just keeps going...and going...and going............. Finally I just cancel the whole process.......until next time I go online and the same window tells me to update my software.* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Shuffle updates the same songs every time
this is a problem i've had with the shuffle from 1.0 and itunes 5 and persists even with the latest update and itunes 6.... basically it has 3 songs that it thinks need to be updated when i plugin the shuffle. if i eject and re-insert it, itunes copies the same 3 songs again. at every re-insert the same thing keeps on happening. deleting the songs and copying them over again doesn't solve the problem.
if i completely factory reset it, and load it up with songs, it'll pick anything from 1 to 3 songs to continually update at every insert.
anyone know the cause?
(i have the 1gb shuffle, disk use set to 102mb, itunes reports 112.3mb free)anyone one else with that problem at all or perhaps possible solution??
-
Can anyone help me get my iMac to reboot? I get a gray "curtain" over the light gray start up screen with a message that I need to restart my computer and to hold the power button until it powers off and then press the power button again to restart. It just does this over and over again and won't restart.
Yeah, as necronym stated, it is a hardware issue and more than likely a RAM problem. Disconnect everything from the computer except keyboard and mouse and try again. If it still happens try removing one and/or swapping your RAM sticks over. Keep trying until you have eliminated all possible combinations. Just put a mark on one RAM stick so you know what have tried. If it still fails to boot properly you should probably replace your RAM, but that is no guarantee of success. Have a look at this link for more info on a Kernel Panic.
The X-Lab - http://www.thexlab.com/faqs/kernelpanics.html
Does the display look like this? -
How do I stop this from happening?
Well, this worked on my desktop! But my problem is on my laptop. :-) I'm running XP, but there was no "Username" under Documents and Settings under the C drive. I did a search for those file names and it wasn't there. I found Mozilla Firefox folder under: C\Documents and Settings\ All Users\Start Menu\Programs\Mozilla Firefox. There are 2 - 1 is Mozilla Firefox (shortcut) and the other is Mozilla Firefox (Safe Mode). I did a Mozilla Firefox search and this is all that showed up.
When I click on the shortcut link (the 1st one), it opens up 2 screens of Firefox. One is the "this is embarrassing" screen. The other is "Choose your Persona" screen. I closed it and reopened and it took me to my home page. -
Could you be specific where the files to fix this are?
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
When I click on Yahoo Bookmark Icon & click on Save this page,
I get the normal screen Save To My Bookmarks, etc. I fill out as
normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??At the top of yahoo bookmarks there is a message:
To Yahoo! Bookmarks users:
Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
Hope this helps :) -
Is there anything that can be done to fix this?
Hi joy145,
If you are having issues syncing and would like to manually manage your content, you may find the following article helpful:
Apple Support: Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
If you are still having issues or continually prompted to erase and sync, you may want to try restoring your iPhone to factory settings before moving your data over (either via syncing or manually):
Apple Support: Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
(Note: Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.)
Regards,
- Brenden
Maybe you are looking for
-
USB-6009 Digital Output Current
You need to have all those grounds connected together - USB-6009 Digital Ground, ULN2003 GND, and the power supply ground. In this case it will not matter how they are connected. If they are not connected, then one of the devices could be damaged. L
-
How can I set the finder window to open the same way every time?
Everytime I open Finder it goes back to it's default view which is just too small, but I want to set the finder columns and window so that they open the same exact way every single time. I'm tired of resizing everything. Currently I have to resize ev
-
Adobe flashplayer will not download what can i use
have been trying to download some items that require a flashplayer. What do I need to download?
-
Please help me!!!!!!! what can I do with the message " no service " I have already updated for 5.0.1 (9A406) and nothing happened. Please Help me!!!!! I´m thinking to came back to my nokia. It´s work at least!!!!
-
If i want to implement sap for repetitive manufacturing type, can u please give typical process flow.