I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM

Hello all,
I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM running 10.4.8. When I go to burn a DVD I get one of two codes 0X8002006D, 0X80020022, why is that a 3,000 CPU cant burn a DVD. My Mac is total up to date with all software and firmware. I saw in the Discussions that I'm not the first person to have this issue but I don't see an answer from Apple, I'm pretty sure it not the DVDs (Memorex DVD-R 16X) because my ****** pc can burn them and it was a 100 pack that I used about 50 from it that I burn on both Macs and the ****** PC. I also have a Dual 2 GHz PowerPC G5 with 2.5 GB DDR SDRAM running 10.4.8 which is also unable to burn them and it also comes up with the same errors. I have not had this issue until I updated my Macs to 10.4.8, PLEASE HELP.
Thanks,
Coons

Yes I can play CDs and DVDs but I was not able to burn a 4.01GB folder, I have since decreased the folder size to 3.75 and was able to burn the DVD. I'm creating another just to double check, my G5 was unable to complete the task and I also gave a shot at a 2.77GB folder and it failed I also gave a 200Mb file a chance but it still did not burn. I was able to burn the same 200MB file on a CD, PLEASE I NEED HELP.

Similar Messages

Burning DVDs on my Macbook Pro 10.6.8

Can someone please help? I cannot burn any DVDs. I keep getting the following error message: (error code 0x8002006E). Thanks

Don't know what the error code means, but if you're unable to burn DVDs, it could be that your SuperDrive just isn't that "super" any longer. You may want to take your machine to your local Apple Store or an AASP and have them diagnose the problem: if it turns out that you need a new SuperDrive, you'll be much better financially getting a new one from OWC and installing it yourself (instructions on OWC's website).
The first thing you may want to try is just using another disc, though: perhaps from a different vendor? I've been using Verbatim discs for over 11 years now and have only had one bad one in the bunch...
Try another disc - or a different brand. If the problem persists, take the machine in for diagnostics. If it's a drive failure, just get a new one from OWC and install it yourself. Quite simple.
Good luck,
Clinton

Burn DVD-9 on Macbook Pro?

I have the last model of Macbook Pro (2.6 GHz Intel Core Duo) before the current unibody design, with the MATSHITA DVD-R UJ-875 drive. The DVDSP manual seems to say that I can burn DVD-9 discs with my system. Can anyone confirm this?
And if yes, can anyone recommend a reasonably priced supplier for this type of disc?

Go to System Profiler>System Hardware>Disk Burning.
Look in DVD -Write
If you see this - DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Your drive supports double layer burning.
Been using Verbatim DVD+R DL inkjet printable disks for a while with no issues. I think I got them through tapeonline.com. They also stock Taiyo Yuden DVDs for a reasonable price.
x

Audio problems from burning DVD's from Macbook Pro?

Hey guys,
So lately I have been having problems with burning DVD. I use either iDVD or Roxio Toast Titanium 11 too burn movies to play on my television. After burnign them I notice all of them have audio problems. It's as if the audio is faint for the dialogue but when background music plays its blaring! I checked my TV and its definitely not my Television because sound plays from both speakers. I was wondering if any other Macbook users had this problem or users of either of these programs had this problem because it's such a hassle burning movies without really enjoying them.
Any help is greatly appreciated!

Try the Importing & Burning in iTunes for Mac Forum

Unable to burn DVDs because I renamed the drive the project and burn files are on. Please help.

I am unable to burn DVDs because, not thinking, I renamed the external drive the project is on. How do I fix the problem in DVD Studio Pro 4? I changed the name back on the drive, the files show as linked, but it won't burn. I've tried to refresh the assets, didn't help. Relink is not available to try. I tried to go to file/advanced burn & build, but it was not available either. I'm new to all this so am very afraid to trash the preferences, not knowing if I'm going to do other harm.
Thanks,
Trish C

Reimport the files and drop them into the project.
Your links should work.
x

Unable to burn DVDs on iMac. Folders dragged to DVD window appear as documents. DVDs from same package burned OK last year. Using Lion. CDs burn OK.

Unable to burn DVDs on 2009 iMac ( Lion ). Folders and any files dragged to DVD window appear as blank documents.
Burned DVDs from same package ( Memorex ) last year OK. CDs burn OK. DVDs are several years old, if that matters.

The music is a tune that was purchased/downloaded from the iTune store. The slide shows (five of them) consist of digital photos (jpg) that I have taken. The interesting thing is that I also have an eMac (about three years old) that I have created the same iDVD project (identical music & identical slide shows). I have been able to burn a DVD disk of this project on my eMac WITHOUT A PROBLEM. The thing I do not like about the eMac is that I purchased family pack of iLife 6 last year (because I liked some of the new Themes). However, when I installed it on my eMac, for some reason it takes about 5-10 minutes to get iDVD 6 "up and running." Once it has loaded the Themes, however, I am "good to go." I've had this computer into the "Genius Bar" at the local area Apple Store TWICE and they are unable to get it to work more efficiently. The even reinstalled the entire operating system to no avail. So, the solution is to launch iDVD 6 on my eMac and then go do something else for 5-10 minutes. But at least I am able to burn my iDVD projects to DVDs.
With my iMac, iDVD launches quickly but is useless since I am unable to burn my iDVD slide show projects to DVD.
So, as a result, I am pretty much ready to "call it a day" with the iMac and will go back to my eMac.
Thanks for your time.
SCC Jeff

Unable to burn dvds

I am unable to burn dvds. I'm attempting to backup my iphoto library. When I drag and drop I get an alias icon on the dvd, it does not copy. When I go ahead and try and burn, the disk is ejected and i get them message, "an error has occured" This is my first attempt at burning a dvd.
Do I need additional software?

Do you use PLUS or MINUS media?
Take a look at system profiler whether your drive is capable of writing the format you have chosen.

Unable to read burned dvd, unable to format dvd, and unable to burn dvd

Unable to read burned dvd, unable to format dvd, and unable to burn dvd with my HP G62-339WM Notebook PCI have been unable to perform the Windows back up for months without using new discs. But even after using new discs Windows backup tells me that the disc that I previously used that it is asking to insert is not formatted. I also have not been able to read any dvds that I previously burned, instead it will sometimes recognize them as blank and they are not. I also cannot perform a format on new dvd discs nor burn to them. I have been able to read some previously burned discs on another pc but not the discs that were created with Windows backup. I have tried everything. I have uninstalled the device, ran the fix it, tried troubleshooting, checked the registry and could not find the upper and lower filters listed. I am however able to read program software and the autorun pops up. Once in a while the autorun will pop up when a blank disc is inserted but then that is all the further I am able to use it. I don't know what else to do. I really want to be able to at least burn files to back up so that they are not lost forever. Please help!

Fixed it myself - for some reason the La Cie refused to read the media. Had to use another machine to pull the data from the drive, copy it over the network to my iMac and then mount the ISO image.

Can't burn any DVD on my macbook pro

I can't burn any DVD on my macbook pro, also some of previusly burned DVD are not recognized now & cant be mounted. I tryed choosing different software Burn, KKitchen, Titanium Toast 11, LiquidCD, NTIDragonBurn_v4_OSX, ExpressBurn_i (also burn from Finder) and different brands of DVD -- same diagnostics -- Medium error. One brand (TDK DVD+R) is unstable burn one or two disc tnan begin spoil DVD discs. Have you any solutions?
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2,2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
OPTIARC DVD RW AD-5970H:
Firmware Revision:          3APE
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh

Have you read this post? may help you
https://discussions.apple.com/message/18149044#18149044

I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

I'm sure the pros will be along to ask what your settings are. Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs. This could partially be because it includes a template to convert you movie into correct DVD format. I was quite pleased with the outcome after multiple failed attempts using FCPX alone.

How to burn a dvd on a macbook pro that will play on a pc?

how to burn a dvd on a macbook pro that will play on a pc?

Is this a data DVD or a 'movie'?
Clinton

Sense Code Error 31000 while burning DL DVD Encore CS5 Macbook Pro

While attempting to burn a Dual Layer DVD on my Macbook Pro I got this error: "Sense Code 31000" just before it started to burn.
I changed the burn speed, verified my laptop burns DVD+R DL discs. Any help is much appreciated. Must burn a master to duplicated 100 dvds by Friday. Thanks!

Hi,
Sense Code errors are hardware or blank media related.
Try to burn with other blank disc, if it does not work then the problem may be because of burner.
Thanks,
Pankaj Gauba

How do I burn imovie to dvd on my macbook pro that can be read by dvd player to watch on my TV.

How do I burn imovie to dvd on my macbook pro that can be read by dvd player to watch on my TV.

Purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.

Do I need a software to burn dvds to my macbook?

I just wanted to know if I need a certain kind of software to burn dvds to my macbook and create dvd's.
Black Macbook Mac OS X (10.4.7) 2.0 GHZ 1GB Ram 80GB Hardrive

Nsovinsk,
You can use a program called Handbrake which will burn dvd's onto your computer and then you won't have to have the disk anymore to watch it on your MacBook.
It will also put it in a format so you can put the dvd's that you rip onto your iPod which is what I use it for but you can also use Handbrake for what you are wanting also.
It doesn't take that long either, maybe like 20-30 min but thats not bad.
Here's the link:
http://versiontracker.com/dyn/moreinfo/macosx/21117
Hope this is what you where looking for!
Sam

Finder show me that i have a dvd ready to burn, but i didn't have a dvd in my macbook pro!

finder show me that i have a dvd ready to burn, but i didn't have a dvd in my macbook pro!

If you are downloading via iPhoto, the movies should be downloaded directly along with the stills.

I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM

Similar Messages

Maybe you are looking for