I'm using a Macbook Pro Retina. I'm connected using a wifi and FaceTime works perfectly. But if I open Safari(or Chrome, or Firefox or any other brower) it said: you're not connected to the internet. I've also an iPhone that works fine on the same wifi.

Could it be  because I'm using the same IP address over 2 devices? How can I set them differently?
Thank you very much.

Hi.
Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply

Similar Messages

  • Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

    Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

    On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

    I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

  • Hi, I have a latest Macbook Pro Retina. I connect its hdmi port to a DisportPort of HP Compaq LA2205wg external monitor, but no signal at all. Could anybody help me

    Hi, I have a latest Macbook Pro Retina. I connect its hdmi port to a DisportPort of HP Compaq LA2205wg external monitor, but no signal at all. Could anybody help me

    I could be *very* wrong but did not know you could output from HDMI into displayport consistently with no issues.
    Try a mDP to DP cable like this (the mDP end will go directly into the thunderbolt port of your laptop)
    http://www.monoprice.com/Product?c_id=102&cp_id=10246&cs_id=1024606&p_id=6006&se q=1&format=2

  • My macbook pro says I am connected to the internet but won't load pages

    my macbook pro says I am connected to the internet with a strong signal but it won't load any pages.  The internet works fine on my iPhone and other computers so it must be an issue with my macbook.  Any suggestions??

    Change your router channel number.  Most times this works & is all you have to do. 
    See KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    ============================
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using Linsys router contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.
     

  • My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

    My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

    Same issue here too.  I will try reinstalling the firmware update.  This has happend to me twice.  The only way to correct the issue was to reboot.
    Thanks!

  • HT4796 Can Windows 7 be installed on my new MacBook Pro, through my network connection?  The disc would be in my Windows desktop.

    Can Windows 7 be installed on my new MacBook Pro, through my network connection?  The disc would be in my Windows desktop.

    I wouldn't recommend installing through a network connection.
    For a Virtual Machine:
    If you have the Win 7 media (DVD), use an app like PowerISO or MagicISO to make an ISO file of the install disc and use that.
    For BootCamp:
    Use the original install media and BootCamp Assistant, to install from your DVD Drive.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • Macbook pro had coffee spilled on it 2 weeks ago, all works fine except monitor display.

    Macbook pro had coffee spilled on it two weeks ago; all working fine now except for the monitor, display is dim and photos not appearing properly. Any suggestions? Apple said would cost too much to repair, anyone had any luck with outside repair facilities? thanks.

    I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
    http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
    then here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

  • I have a MacBook Pro "Core i7" 2.7 13" Early 2011 and osx mountain lion, but i can't make the Airplay Mirroring option appear in the menu bar

    I have a MacBook Pro "Core i7" 2.7 13" Early 2011 and osx mountain lion, but i can't make the Airplay Mirroring option appear in the menu bar. Help please!!!

    Go to system preferences below screen>display and click show mirroring menu

  • Everytime I open Safari it downloads a series of blank.aspx files into my downloads folder. Anyone having the same problem?

    Everytime I open Safari it downloads a series of blank.aspx files into my downloads folder. Anyone having the same problem?

    Has there been a fix for this yet?  I am downloading close to 150 blank aspx files every 15 minutes.  I have tried the fix from Carolyn Samit and the AdBlock seems to be working thus far, but when it is not working it launches Adobe Dreamweaver.  Which is going berzerker.
    Any help would be much appreciated.
    Thanks to all on this community.

  • My new macbook pro retina won't connect to my iPhone 4s via bluetooth

    Just bought macbook pro retina. have had iPhone 4s for two years and use it to tether my iPad to regularly no problem. however the macbook pro won't connect to the iPhone via bluetooth. it recognises it's there and a connection code is displayed, but when I enter the code it won't connect and the phone insists that I agree to 'forget this device'. how do I enable tethering so I can use the 3g signal to browse on my laptop whilst travelling please?

    Only thing I could suggest would be to "Reset Network Settings" on the phone (Settings> General> Reset>) . Of course, this will forget and delete any saved Wi-Fi or network configurations, but if that's not a problem for you then, maybe worth a shot.
    Although saying that, I think iCloud remembers old settings (if you are connected and sharing network configurations), so may not be a total loss.

  • Anyone having issues with their MacBook Pro Retina losing network connections?

    I have been having a problem in which my internet connection, which will be working normally prior to closing the Mac, will not reconnect after it's woken up.  I have to go so far as to reset my Time Machine AND Macbook to restore the connection.  I noticed the most recent update for Mountain Lion also included some mention of a specific patch for Macbook Pro Retina's.  Does anyone know of a documented issue?

    Some recent updates from Apple might affect your problem, but I can't be sure.  How long have you been having the problem?
    I have to go so far as to reset my Time Machine AND Macbook to restore the connection.
    Don't confuse "Time Capsule", an Apple Wi-Fi base station, with "Time Machine", backup software included with OS X since version 10.5.  Your problem involves the former, not the latter.

  • WRT1900AC and Macbook Pro Retina - refuses to connect with Wireless N

    I have the first generation Macbook Pro Retina, and just recently upgraded my D-Link D-655 for the Linksys WRT1900AC.  I also put the router on the first floor (the D-Link was in the basement) because there were some huge holes in wireless coverage I hoped to fix.
    To my dismay, the thing will not negotiate a connection with ANY wireless N device as wireless N.  When I set it to wireless-N only on 5 GHz, nothing will connect to it, and same with 2.4 GHz.  My macbook's system report shows the network as being Wireless G on the 2.4 band and wireless A on the 5 GHz.
    I have 50 MBPs internet here, and when I plug directly into the router, I get that.  However, I am maxing out at 20 MBPs over wireless with both my macbook and my Samsung Galaxy S4.
    I'm about at wits end, my next step is to return this thing.  I have been on hold with support for 20 minutes, which is freakin eerie because they have no hold music or talking so it's just dead silent.
    This morning I spent an hour on a live chat with support, and nothing she had me do made it better, and in fact any changes made it drop from 20-21 MBPs down to 16-17 maximum.
    On her advice, I re-installed the firmware, downloading from online, and this had absolutely no effect.  Any other ideas to try?  I get these crappy connection speeds sitting 3 feet away from it.  I live in a house, so no massive interference from neighbors (only 2 other wifi networks are visible)
    Solved!
    Go to Solution.

    let me be clear here: I had the same slow speed with both my mac and my galaxy s4, it is not a mac problem.  I had disabled media prioritization and the WMM thing in the settings for media prioritization.  Yes I am sure I am connecting to the right SSID.  The old router is DIR-655.  Part of the reason I wanted to upgrade is it disconnected my galaxy s4 every 2 minutes (and many people have had that problem, a quick google search verified that the router just doesn't like galaxy s4).  OS X 10.7.5 but as I said my Galaxy has the same issue - it does not connect as wireless N, and when I make the router Wireless N only, not one of the computers in the house can connect to it.  That includes a Mac Mini, Galaxy S4, Macbook Air, Macbook Pro Retina, and a Chromecast (which only works on the 2.4 band, but same issue there).

  • Macbook Pro Retina display laptop to Dell 1409X projector doesn't work

    Macbook Pro Retina display laptop to Dell 1409X projector – I use OSX 10.9 & I've cabled from my thunder port (mini display port) via apple's adapter to a vga cable to a Dell 1409X projector.  But the projected display is different from the computer display. The cursor is controlled from my trackpad, but is only seen in the projection display. Also the dock items are only seen in the projection display. But when I select any application (ex, Word file or a jpeg image) it is only seen on the laptop. Meanwhile the projected display shows items from my screensaver, always different from what is shown on the laptop.
    Thanks for any help.
    Earl

    Hi earlherr!
    Try using the information in this article to help you troubleshoot this issue with your connection to an external monitor:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for