I'm using a macbook pro with version 10.6.8 installed. whenever i try to install my software updates, it immediately asks me to restart my computer to finish the installation. after doing so and signing back on to my account no updates have been installed
I'm using a macbook pro with version 10.6.8 installed. Whenever I try to install my software updates, it immediately asks me to restart my computer to finish the installation. After doing so and signing back on to my account, nothing has changed and no updates have been installed. It still says the same 8 items need to be installed, and the same process occurs again. Any idea how I can fix this?
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac
Similar Messages
-
Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11
Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari -
Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanksYes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?
There's info here on setting up separate libraries and user accounts. You won't have to reload (or re-import) all the music, just copy it.
The reason I suggest separate accounts on the Mac is because if you have the two libraries under the same user account, iTunes will also open the last library that was open in that account, and you'll always have to be mindful of which library that is. If you open iTunes and find it's not your library, you'll have quit, relaunch holding the option key and select the other library.
No, you won't have to log in and out of the Mac. (If I'm understanding your question here.) Multiple accounts can be logged in at the same time. And with fast user switching, you can toggle between user accounts.
I'll admit that maintaining the two libraries gets a little tricky, because if you share all the same music, you'll have to add it to one and update the other. (That won't happen automatically.) But I think Home Sharing makes this much easier to do.
Hope that helps! -
I am using a Macbook Pro with OS X Yosemite 10.10.2. I am unable to open encrypted emails using webmail. I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader. When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available."
I am using a Macbook Pro with OS X Yosemite 10.10.2. I am unable to open encrypted emails using webmail. I have verified my certificates are loaded in the keychain for my military common access card while using a CAC reader. When I try to view the message it gives me the error saying "content can't be displayed because the S/MIME control isn't available."
-
At the moment i'm using my macbook pro with an ethernet cable = where i'm now i don't have wi-fi -> now i'm trying to do a wi-fi hotspot for my iphone through my macbook pro, but it's doesn't work - please help me!
Theres almost a trick to it for first time users, goto SETTINGS...General......Cellular (if Verizon) ....Personal Hotspot, turn it on.....turn on wifi on your Mac, select your Iphone. Enter password.
If you take too long doing it, youll need turn turn off and on real quick the "personal hotspot" slider on the Phone.......then go quick again thur the Mac. -
I use Acrobat Pro X1. I use a macbook Pro with Yosemite. Was working fine. Last time I launched the software, I got this Abrobat Application Manager poping up and overriding the Acrobat launch asking to buy or try Acrobat DC. I can't make it go away, even when I press the privacy link. Please don't tell me this is some malware bug. Should I uninstall the current AX1Pro and reinstall it. This is very frustrating.
preznikoffAmac.comHi Peter,
Use the camera icon to post a screenshot when you reply:
Does the pop up window have 'License this software' button. If so then please click and activate it.
Regards,
Rave -
I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I want to place an image in the Note section of my Contact book . I use a MacBook Pro with Yosemite 10.10 . I am NOT talking about using an image to identify the contact, just an image that contains some information relevant to the contact. I have tried copying and pasting, dragging and dropping.
From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista -
I am using a MacBook Pro with 16GB ram. PS opens but I cannot get any files to open. I need some h
I am using a MacBook Pro with 16GB ram. PS CS6 opens but I cannot get any files to open. I need some help please
What files? How do you try to open them? From where? What else can yyou tell us? You need to provide more info.
Mylenium -
I have a podcast that isn't updating with the weekly podcast. I called the company that submits them and they say it's on itunes as they have been submitting them. Any suggestions?
Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
Hey there.
Please help me.
Whenever i try to sync apps, tones, music etc, it says me to authorize my computer. But i had already authorized it and had even signed into my account. Can you please help me? I am facing this problems since long. please.
It goes like this.
Whenever i connect my iPhone5, it starts to sync. later when it reaches the 4th stage of 'Tranferring Purchases' it stops and says me to Authorize my computer.
But i had already authorized it and even signed my apple id.
Moreover, i have only authorized 1 out of my 5 computers.
Please help me.
I have been facing this from long.
Thank You.Hi Rameez,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is asking you to authorize your computer repeatedly:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best,
Jeremy -
Using a Macbook Pro and OSX 10.9.2. When I am typing an email, it fills my trash folder with multiple copies of the email before I send it. I can have over 10 copies every time. How can I keep this from happening and filling my trash folder? I did not have these issues with previous version of OSX.
writing Email produced in multiples in all mail
Multi Copies of Drafts To Gmail Server -
Using a MacBook Pro with Aperture 3
Anyone using the newest 13" MacBook Pro with Aperture 3? I'm wondering how you like the performance of that laptop with AP 3. Are you using the 2.4 or 2.6 GHz?
I'm considering a new Mac and want to know how this holds up with Aperture.
Thanks.micro43 wrote:
Did post #2 not already answer this? I would think someone who actually uses this machine would be more inclined to give you an accurate answer...
The point is that there is no per se "accurate answer" to the general performance question. E.g. we hear performance complaints regarding all kinds of boxes stronger than the 13" MBP as well as some reports of users satisfied with MBs or Minis. The more feedback the OP gets the better able he/she is to come to a satisfactory personal conclusion.
Personally I consider the display an important part of what characterizes graphics app performance. Any +"actual user"+ has already decided against the additional *70% more pixels of the 15" size* with high-rez matte display and also has conluded that glossy is OK for them. IMO a potential new buyer of a laptop for graphics should have those differences firmly in mind when decision making. *Clearly a trip to physically compare 13" glossy vs. the 15" size with high-rez matte display is in order.*
A user like cbandes doing the heavy work on a MP with real display is much more likely to be happy with the tiny glossy 13" display part-time in the field than is someone trying to run a full pro Aperture workflow from a 13" MBP. Personally I like pixels and dislike glossy, so I would never go from 1.7M matte pixels to 1M glossy pixels just to save 1.1 pound of weight. IMO. -
Can I decide which graphics chip I can use in MacBook Pro with Retina?
I have a MacBook Pro with Retina display. I have the 15inch model so I have the Intel HD 4000 as well as the NVIDIA GeForce GT 650M. My computers automatically decides which graphics chip to use which I now I normal BUT I was wondering how and if I would be able to choose which graphics chip I would like to use.
Most of the time, your computer will switch between graphic chips automatically - so you're right, you don't have to choose. However, in certain situations, your machine will get too hot or you'll get too much drain on your battery. In that case, you may have to choose the chip: in that case, gfxCardStatus http://gfx.io is a good application to download. It's free.
Maybe you are looking for
-
How to upload MYSQL tables to Linux server
I have been testing a PHP/MYSQL site on my own local apache server, now am ready to upload to internet. My hosting company is Papazilla.com which is an exact clone of GoDaddy.com. I used the GoDaddy/Papazilla interface to create 3 tables that my site
-
Droid Ultra, my contacts list disappeared How do I get it back on my phone?
My contacts list used to reside on the bottom bar of my phone next to the telephone. How do I get it back?
-
How can I get CDP neighbor information from access point reports in Cisco Prime 2.0
How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in t
-
Absolute Layout and Invocation Interface
Hi again :) I hav just another Problem. I Made a Gui and want to call it from a C prog throug the Java Invocation Interface. When I use GridbagLayout or flowlayout everything works fine. But when i use Absloute Layout nothing is shown and the Java Gu
-
Feature Idea: Export Sitemap to PDF
Dear People and Adobe Muse Dev Team, I've been using Muse (currently v6.0, Build 751) for about a month now and realizing good results with the app. Thank you. One new feature that I know I can put to good use for my clients and I'm thinking other d