I'm using an older mac (2008 iMac).  Things were fetting slow and I used a program called DupZapper to get rid of a lot of duplicate files.  It worked and my computer is running better.  The only problem is now InDesign crashed at startup.  I have the ori

I'm using an older mac (2008 iMac). Things were getting slow and I used a program called DupZapper to get rid of a lot of duplicate files. It worked and my computer is running better. The only problem is now InDesign crashes at startup. I have the original disks and serial number (CS3)  The error message is "required resources are missing".  Same message if I try to uninstall.  Any clues as to how to re-install?

reset your preferences and retry launching id:  InDesign Help | Setting preferences
if that fails, uninstall (properly with the uninstaller), clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Similar Messages

  • Why does my iMac display keep shutting off?  Computer still running in the background.  I've tried unplugging and restarting, to no avail.

    Why does my iMac display keep shutting off?  Computer still running in the background.  I've tried unplugging and restarting, to no avail.    The computer is well out of warranty - about 7-8 years old, running 10.6.8

    Checked.... the settings had not been inadvertently changed, but I did move the scroll and reset them back to the original.   Hasn't shut off again.... yet.   Will re-post with follow-up one way or the other.   Thanks.

  • Hi, how to load mac without running windows (bootcamp)? The problem is this: the last time i ran the windows, but he hangs and died (can not run further  the logo). now i can not load not windows, not maс! how to be, what to do???

    The problem is this: the last time i ran the windows, but he hangs and died (can not run further  the logo). now i can not load not windows, not maс! how to be, what to do???

    can any body help me, plz!!

  • TS3276 I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

    I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

    I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
    My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As".  So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail.  I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again."
    Here's what I know:
    The server -- Peter's iMac (8) does exist;
    The server -- Peter's iMac (8) is available at this time;
    The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
    The server IP address is correct, as specified in the system sharing preferences;
    The network connection is active when I attempt to connect.
    I'm convinced the problems stem directly from the OS X Yosemite update.  None of this was ever remotely an issue in the previous OS X's -- any of them.  This is maddening!  What can be done?  Apple?? Anyone???

  • I have created a second user on my imac (OSX 10.7.1) and applications won't stay in the dock and my preferences default after restart. Anyone else have this problem?

    I have created a second user on my iMac (OSX 10.7.1) and applications won't stay in the dock and my preferences default after restart. Everything works fine with the main user. Anyone else have this problem?

    Hi again, ;o)
    I found this advice in another thread (here), which you might find helpful...
    Unregistering the iMac from .Mac syncing and re-registering it (replacing the computer's information with the .Mac information) resolved the issue.
    The .Mac sync information was Reset (i.e. recopied in it's entirety) from the MacBook (the 'good' computer) to .Mac prior to unregistering and re-registering the iMac, so a fresh copy of the sync could be loaded from .Mac to the iMac.
    I hope this helps the others who have had this problem.
    Regards,
    Art
    Yang

  • How do I transfer my checked songs from one computer to another - tried exporting library playlist etc but no luck! Please help! I have 26,000 songs - 17,000 are selected and I can't run down the list on my new computer and re-check 17,000 songs! Thanks!

    How do I transfer my checked songs from one computer to another - tried exporting library playlist etc but no luck! Please help! I have 26,000 songs - 17,000 are selected and I can't run down the list on my new computer and re-check 17,000 songs! Thanks!

    Make a smart playlist of your whole library but only checked songs - #4 on  http://support.apple.com/kb/ht1801
    Highlight all files in that playlist, then drag to the other drive.  This isn't preserving any playlists or whatever, just copying files from one drive to another.
    You might want to delete the smart playlist this once you are done because it will probably gobble up resources with that many files.

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • Snow Leopard 10.6.3 upgrade issues..  I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded.  Any suggestions?

    I've tried to upgrade to Snow Leopard 10.6.3.  I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded.  Any suggestions?

    Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
    It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
    If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
    Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free)  and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
    It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
    Was there no warning dialogue after the unsuccessful install?
    Message was edited by: noondaywitch ; link added

  • I want to know how to backup my library to a fixed backup drive rather than to a CD or DVD. I mostly have audiobooks in the library and my computer is running out of space. There are so many that copying them to a CD or DVD would be a horrendous waste of

    I want to know how to backup my library to a fixed backup drive rather than to a CD or DVD. I mostly have audiobooks in the library and my computer is running out of space. There are so many that copying them to a CD or DVD would be a horrendous waste of time and resources. Can you please help me?

    msscott69 wrote:
    I want to know how to backup my library to a fixed backup drive
    Copy your ENTIRE iTunes FOLDER to an External Drive...
    Full Details Here  >  http://support.apple.com/kb/HT1751
    Also... Have a look at these 2 Videos...
    http://macmost.com/moving-your-itunes-library.html
    http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

  • HELP!! WRT54G2 works for one computer, but not for the other

    I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

    As your one computer is working fine then there is no problem with the router so far...
    The computer which is not working...check the IP Address on that...
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your LAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

  • I had a drive failure and lost the iWeb file along with other things.   I did manage to save a lot of user file documents but I don't see or   recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

    I had a drive failure and lost the iWeb file along with other things. 
    I did manage to save a lot of user file documents but I don't see or 
    recognize the iWeb site file. It was on a 15" G4 Titanium pb.
    I'm trying to find a way, using version 2.0.4 of iWeb on a different 
    pb to recover the file into the iWeb app or a way to download the site into iWeb.
    There are 6 pages of images and text, and it 
    would be a task for me to recreate the whole thing again. I did 
    download the site but I don't know how or if I can get iWeb to see it and open it.
    Does anyone have any knowledge about this? The link to my site:
    <http://web.mac.com/danauerbach>
    Any suggestions will be most appreciated.
    dan auerbach
    [email protected]

    Unfortunately iWeb cannot read or import previously published files, only generate them.  You'll have to recreate your site from scratch.
    However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
    OT

  • I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that it needs to connect to iTunes. iTunes says my phone needs to be restored before it will work with iTunes. HOw do i avoid restoring?

    I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,

    I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs.  Any other advice?

  • Hi I am wondering if anyone can help me. I have two albums in my photos app other than the camera roll that i cant seem to get rid of. They contain duplicates of the photos i already have in my camera roll and its using alot of space.how do i delete them?

    Hi I am wondering if anyone can help me. I have two albums in my photos app other than the camera roll that i cant seem to get rid of. They contain duplicates of the photos i already have in my camera roll. One is called Photo Library, and the other is called iphone. It's using alot of space and I don't know how to delete them. Please HELP!!

    those are photos that have been synced to your phone from your computer. plug in your phone to your computer, open itunes, select 'photos' tab from the top, and uncheck 'sync photos'
    this will erase the photos from your phone that are not in the camera roll

  • Can anyone recommend a duplicate file finder application for OS10.6 systems?  All the apps I find on the App Store are only for 10.7 and later.  I don't know how to filter a search by operating system (if this is even possible).

    Can anyone recommend a duplicate file finder application for OS10.6 systems?  All the apps I find on the App Store are only for 10.7 and later.  I don't know how to filter a search on the App Store by operating system (if this is even possible).  I currently have a MacBook running OS10.6.8.   If you can recommend an app,  please post the URL.     Would appreciate any helpful suggestions....  
    <Email Edited By Host>

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

Maybe you are looking for

  • MacBook Pro Cannot Connect to the Internet

    My MacBook pro was perfectly active and online, in my linksys router last night before I went to sleep. I left it active as I was downloading some files, they were going awfully slow, but I didnt pay attention and left up. When I woke up today, and t

  • TS2167 iWeb blog publishing help?

    I am having trouble publishing an iWeb blog page.  I keep getting "Publish Error" unkown msg.  I have an iWeb website already and wanted to add a blog.  Any ideas would be appreciated, thanks

  • How do I reset iCal or delete EVERYTHING on it?

    Hi. I haven't used iCal in over 4 years and would like to use it again. However, it is full of appointments and schedules that I'd set to repeat weekly that no longer apply to my life now. Is there a way that I can simply DELETE all this stuff withou

  • Error: Public member 'Dispose' on type 'ISCDReportClientDocument' not found.

    Hi everyone, I have an ASP VB.NET web application developed in Visual Studio 2010 4.0 loaded on server A making a call to server B running Crystal reports 2013. I want to use the same Viewer and use Case to pass the name of the report. But I can’t Di

  • UNLOCKED not activating.

    Hi, I have purchased two iPhones 4 from the UK checked the model number it is MC605B/A & MC603/A which is are unlocked models I inserted the sim and connected it to iTunes it says that the sim is not accepted and is asking me to get a sim from a carr