I'm using iphone 3gs, since i updated my phone to iOS there are instances that it crashes. Any tips on how to fix this?
Since i updated my phone to iOS 5, I experienced my phone crashes adn it drains my battery. I don't know the reason why, whether the hardware (esp. memory) can't handle the more advance multi-tasking feature of iOS 5.
Any help that you may advise to fix this?
No fix from me, just a "I have the same issues"
It even happens while doing nothing, and just charging it. Every few minutes I get the spinning wheel and the "recharge chimes" sound. I found a lot crash logs, most of them are for "Low Memory" or "SpringBoard" crashed due to a segmentation fault, also known as "BAD_ACCESS_EXCEPTION (SIGSEGV)"
Similar Messages
-
I have an AT&T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?
Check Settings>General>Cellular to be sure you have Cellular Data set to On.
-
Hi, My friend has just updated there 3GS to IOS6 and once it's done, 2 screens appear. first one says, Update complete, there are just a few more steps to take. Press continue and another screen comes up with the itunes symbol and the cable and says connect to itunes. Once plugged in, on itunes it reconises the phone and has the loading symbol up, but it doesn't loads anything and can't press anything. Anyone know why and how to resolve this?
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .
Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out. -
i m using iphone 3gs & i m updating the OS from 4.1 to 6.1 ,,it is showing the message that ur iphone cannot be activated because the activation server is not temporarily unavailable
Contact your Carrier...
Also see this discussion.
https://discussions.apple.com/message/21189708 -
Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If I take a picture on Instagram, it will not automatically save it to my camera roll as it used to do, nor does it save any image, I just want it fixed.
To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.
-
Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??
I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.
-
In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
Sorry for my bad english :S
Please, please help meContact the carrier.
-
Iphone 4 microphone works partly unreliable. Any ideas on how to fix this issue?
People calling me cannot hear me talk - then it gets resolved and then it happens again. Very unreliable.
How can I fix this? Have not dropped phone or wet it. This has been happening off and on a few days now and is very very fustrating. Any help on how to fix this? I was on a thread but signing in kicked me out of it.Hi nicolep89,
If you are having multiple non-specific issues with your iPhone after a recent update, your best course of action may be to back up any of your content to iTunes, restore the phone to factory settings, then test to see if the issues persist in its default config before bringing back your content from the backup. You may find the following articles helpful:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Apple Support: Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Regards,
- Brenden -
When updating to itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.
1) The older version of Bonjour can not be removed. Contact your technical support group.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?
My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?
http://support.apple.com/kb/ts1538
-
HT1338 after an update safari stopped working any ideas on how to fix this?
after an update safari stopped working any ideas on how to fix this?
Use another browser to install Safari again.
You can download Firefox for the Mac, place the download on a USB thumb drive stick it into the Mac and copy it, run the installer.
Once FF is on, download a new copy of Safari from Apple's site.
https://discussions.apple.com/docs/DOC-3046 -
My iCloud will download songs to my iPhone if I go into my music app there. However when I go into music on my ipad it says there is no music and I can't download from iCloud either onto my ipad. Any suggestions on how to fix this problem?
I am currently having the same problem with music that is downloaded to my laptop and stored into itunes/itunes match which is not downloading to my ipad. I had this same problem a few months a go and it was fixed with a update to my ipad but it has happened again with most recent update. The bad thing is I didn't notice until I went to listen to the music on my ipad and it was available. Apple is becoming very unattractive to me. I am in search of a diffrent device.
-
I downloaded apple mainstage and am pleased with it. However when i use it on my keyboard the the sustain pedal holds down the E note. Any suggestions on how to fix this?
If you have this problem (facetime dropping calls). Just go to settings, then general, and scroll it down to reset. Once on the reset, tap on reset all settings, it will ask your code. After you do this close out your iphone by pressing the main button on top of your iphone. I tried everything and this procedure works with me. Let me know if it works with you all.
-
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.
Maybe you are looking for
-
CoPilot USA Map Maintenance Update Problem
i'm having a problem with CoPilot USA map maintenance updates. I check for updates and get a notice of a map maintenance update. I download the update and stop then restart CoPilot. CoPilot gives an indication that the map update has been processed.
-
Not another classpath problem...
I'm trying to use the TableExample demo from jdk1.3.1. I'm using cloudscape as the database for this from the j2sdkee1.3.1. The database starts no problem (rmi mode). So I run the example and provide the database driver in the popup window, only to g
-
Delay rendering of Panel Group
I have Tabbed Panel Group widget that is driven by Spry Data, that's held in a parent frame. The markup for the group is defined in a region, using spry:repeat for each tab and {} for data output. The onLoad event for the page calls a function that c
-
dbus-monitor --session Failed to open connection to session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the netwo
-
Is LiveCycle Designer the appropriate tool
Hello there, I am looking for a tool to take existing PDF forms (think goverment forms) and make some subtle formatting changes, and generate new forms. I plan to use fdf files to populate the form fields when rendering the pdfs from the forms. Is Li