I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

Similar Messages

  • Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

    My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • Why is my airportxpr only working with Itunes and not with another music program

    why is my airportxpr only working with Itunes and not with another music program??
    I can not select/see other outputs in my sound selector.

    You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
    for Windows - http://rogueamoeba.com/airfoil/windows/
    for Mac - http://rogueamoeba.com/airfoil/mac/

  • Does ipod touch only work with wi-fi? Can I download games through home mac?

    Does ipod touch only work with wi-fi? Can I download games through home mac?

    iPod touch is Wi-Fi only, yes. I'm not sure exactly what you mean by games from home Mac, but you can purchase game apps in iTunes and sync them to your iPod.
    Merry Christmas.

  • Does T400 can only work with up to 4GB RAM?

    Does T400 can only work with up to 4GB RAM?
    Here (http://support.lenovo.com/en_NO/product-and-parts/detail.page?DocID=PD005598), it says 512 MB, 1 GB, 2GB, or 4GB memory.
    So if more than 4GB RAM, will it do harm to the hardware of T400? Or just only 4GB will be used, and no any harm?

    That doc was probably written when there were not 4GB DIMMs available, or at least being commonly used. T400 will work with any combination of 1GB, 2GB and 4GB DIMMs, up to 8GB total. I tried single 8GB DIMM and it didn't work

  • Does airplay mirror only work with the ipad2 and not ipad1

    does airplay mirror only work with the ipad2 and not ipad1

    But can it still stream video wirelessly?
    For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
    I'd like a wireless option.

  • When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

    When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

    It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
    Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive.  Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
    OT

  • Does ws adapter only work with asynchronous web service?

    Hi all,
    can you please confirm whether or not ws adapter (PI 7.1) only works with asynchronous web service?
    I have created an async. outbound service interface in PI 7.1, generated the client proxy in ECC, created an web service based on the proxy, wrote a test program to call the web service (PI scenario uses ws adapter in the sender CC). Everything works fine.
    Then I did the same thing with sync. outbound service interface. I got exception while calling the web service in ECC.
    I've heard that ws adapter is designed for async. communication. Does it mean that it won't work with sync. web service?
    I haven't seen any official SAP document saying taht ws adapter only works for async. web service. If you have any, can you please share it?
    Thanks
    Jayson

    Thank you all for your information.
    The error I got when calling the proxy with logical port (web service) is:
    SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 404  : Not Found") 
    I will debug it to see what exactly happens. And will keep you guys updated.
    Just debugged, the error is because the http header's content type is text/html while it should be test/xml. However this type is set by the ws runtime, not by the application. Anybody has an idea about this?
    Jayson
    Edited by: Jayson on Feb 18, 2009 10:04 AM
    Edited by: Jayson on Feb 18, 2009 12:11 PM

  • Does Mighty Mouse only work with desktop Macs??

    I just bought an Apple Wireless Mighty Mouse, assuming it'd work with my new Leopard OS X Macbook. I followed the instructions on the Mighty Mouse booklet...but no installation start-up window ever appeared. I'm a beginner with Apple, so I figure I've done something wrong....does the Mighty Mouse only work with desktop Macs and not MacBooks?
    Please help if you can.

    Ah! sorry, my mistake! "wireless" was the key word. And yes, prior to my new mighty mouse, I also used the wireless one. And you need to do the following:
    1) Turn bluetooth ON (either from finder icon (you can have it placed on your finder bar by tick box in sytem preferences/bluetooth.
    2) Then, you need to "pair" your mouse via bluetooth setup assistant.
    3) once "paired" off you go.

  • Nano only works with iTunes 4.9

    My new Nano only works if I install the software provided with it: iTunes 4.9
    If I upgrade to iTunes 5, or 5.01 it won't work. Even if I do a clean install of iTunes 5. Any clues? Thanks in advance.

    I guess obviously that's what Apple wanted to be used initially with the nano, because that's what comes with the unit.
    I had already installed 5.0 on my computer in anticipation of getting my nano. It worked right out of the box, fo me, with 5.0. A few people had problems, so the fix was to use the disc, 4.9, with the nano and it worked.
    It definitely should work with 5.0 because 5.0.1 is out already. That might be your fix. Use version 5.0.1 of iTunes and see if that works for you.

  • Quicktime only works with iTunes - Please help!!!

    if I have iTunes installed on my computer with the quicktime, quicktime will not work when viewing videos that are sent to me via email or on places like myspace. It is just a white screen with a Q and a ? mark. What is causing this problem? In order to view those videos I have to uninstall quicktime and then to listent to my iTunes I have to reinstall it.

    Ok I've followed countless random post instructions, uninstalled and reinstalled both iTunes and Quicktime multiple times, cleaned the registry, temp files, documents and settings, program files, etc. and Quicktime 7 still crashes. What in the **** is the deal here? I have to believe that this is a problem with a straightforward solution. Quicktime used to work fine. There are only two possible problems here:
    1) Some remnant of an old Quicktime install is screwing me up. This should not be this hard to rectify, there are a finite number of places Quicktime puts files. Is there any folder I haven't checked?
    2) Some odd glitch allowed me to successfully run QT7 before but now, for whatever reason, my setup has changed in some way I'm not noticing and its now no longer working. In this case there still must be some solution since the problem is very specific: Works with directx disabled, doesn't with directx enabled.
    I sincerely appreciate these forums and everyone who takes the time to read them and help users like me. Still, am I missing some place where I can get a solid official answer from Apple on this? I paid for pro, and that doesn't even get me a support email address?

  • Why does my sound only work with my head phones?

    I recently discovered that my iPhone 4s has not been functioning the way it should be. My sound and speaker are not working. I can't even adjust my volume unless I have my headphones. I can't hear my incoming calls and they can't hear me. This happens every so often and its been happening for the past two days. Is there anyway of fixing it? My phone is no longer under Apple's warranty. Please help.

    Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.

  • Does 'homeshare' only work with iTunes purchased music?

    I have some internet downloaded music and music from various other sources. I recently bought an iMac and turned on homeshareing to transfer my music from my old PC laptop to this new desktop. Only about 50 of my over 3,000 songs transfered. I'm thinking it won't transfer the songs that I didn't purchuse from itunes.
    Anyone know anything about this?
    Thanks!

    Check here for system requirements:  http://www.apple.com/ios

  • Does Time Machine only work with external HDD's and Networks?

    I have a Mac Mini that I just replaced the optical drive with a hard drive. This second HDD is formated into two partitions, with one of them being for my Time Machine backups, the other a media scratch drive.
    When I try to choose this volume in setting up Time Machine, I get an error message that says, +"Are you sure you want to back up to the same disk your original data is on?"+ The message goes on to explain that +"the volume you have chosen for storing backups is on the same disk as the volume containing your data... you should back up to a volume on a different disk."+
    The volume that I have selected IS on a different disk than my start-up system drive and the data to be backed up IS NOT on the same disk as the disk storing the backups. System Profiler defines my startup HDD as "BSD Name: disk0" and my second HDD as "disk1," with the two partitions "disk1s2" and "disk1s3." Mount Point for the start-up HDD is "/" and the two partitions on the second HDD are "/Volumes/Scratch Disk" and /Volumes/Time Machine." These two volumes show up as options when I "Choose Backup Disk" in Time Machine, but not the Mini's startup HDD.
    Does Time Machine allow the use of second internal HDD? I have an external HDD, but it has a clone of my start-up drive on it. Thanks for any help.

    Chris, excluding the other volume could certainly be the issue since the two options that I'm given for a backup volume are both on the same hard disk. The start-up system HDD is not listed. Maybe the message is referring to this, rather than to the start-up disk.
    Not until after I selected "use this volume anyway," did I get to the "Option" screen to exclude items from the backup. When I selected "+" I was surprised to find the other volume, Scratch Disk, listed along with the start-up HDD as being included in the backup routine. So I selected Scratch Disk as one of the items to exclude.
    As V.K. mentions, the cautionary message is rather vague as to what exactly it is referring to. Thanks.

  • Does the shuffle only work with itunes

    Hi again,
    I found out how to go to manual sync mode or at least I think I did!
    It is go to edit then preferences then sync disable.
    Then I went back to Real Player and tried to get some songs from my library,
    well it showed that they were all downloaded but never appeared on the shuffle.
    Is it impossible to get songs from Real Player?
    Thanks

    You need to read this: http://docs.info.apple.com/article.html?artnum=303634
    You NEED to download and READ the manual:
    http://manuals.info.apple.com/en/iPodshuffle_FeaturesGuide.pdf
    If you can’t load a song or other item onto iPod shuffle
    The song might have been encoded in a format that iPod shuffle doesn’t support. The
    following audio file formats are supported by iPod shuffle. These include formats for
    audiobooks and podcasts:
    AAC (M4A, M4B, M4P) (up to 320 kbps)
    MP3 (up to 320 kbps)
    MP3 Variable Bit Rate (VBR)
    WAV
    AA (audible.com spoken word, formats 2, 3, and 4)
    AIFF

Maybe you are looking for