I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
Geoff

I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

Similar Messages

  • The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    I tookyour suggestion and SUCCESS!  I can now access the Itunes Store.  A simple fix, and thanks so much!!.
    Below is the advice you forwarded:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator".
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer.
    Reboot and when I reloaded itunes the store loaded fine.
    Thanks again, -Dean Stoneburner

  • Multimedia Audio Controller not working..... have installed updates and still not workin

    Can someone help me with my multimedia audio controller? I've initially installed the updates from the support page and after reboot the Xi-Fi driver is listed. After installed the console update programme for Xi-Fi extreme music the driver is gone and I get a "Multimedia Audio Controller" instead with a error message.
    No matter how many times i try reinstalling and uninstalling it doesn't work.

    Hi:
    Click on the link below.  Accept the agreeement.  Download, unzip and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

  • I have just updated my PC with version11.14. I can no longer connect to my Bose 30 soundtouch via media player Can anyone help please

    I have a Bose soundtouch system .Until today I could play my iTunes music through it via air  player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault

    @puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
    After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
    Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks!

  • My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

    My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
    Thank. Simon

    Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
    Thanks, Simon

  • Problem with RAM and slowing of computer when using CS5 can anyone help please?

    Hello I am having big problems at the moment with a slow computer when I am using Photoshop CS5 I am informed that I am low on memory.  I do not store any photographs on my computer they are all on an external hard drive, the only image on the computer are the ones I am working with.  I have been in touch with Norton who think it is an Adobe issue can anyone help please, looking forward to hearing from you and to a swift fix of the problem
    Best wishes
    Sheila

    How much memory do you have installed, and what operating system are you running?
    Mark

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d

    I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d

    I believe Frank is referring to the end use (e.g., for print or on-screen use).
    Until he returns, I can tell you that I ran a quick test using an image from the Aperture 3 training book library which was as follows:
    Camera = Canon EOS 5D Mark II
    Master resolution = 5616 x 3744 (21 MP)
    I was able to export to a JPEG with end file size of 1 MB as follows:
    Export Presets drop-down > select 'Edit' option
    Selected preset name 'JPEG - 50% of Original Size' > change percentage value to 40% > change DPI value to '300' > click OK to set as current default > Export version to desktop.
    The exported JPEG has a resolution of 2246 x 1498 and appears on screen to have the same image quality of the original in Aperture.
    Note - I did not change the default Image Quality slider in the Export Preset dialog (which left it at 10).
    Basically, you will need to play around with the settings until you find the appropriate values to arrive at an image version you want.

  • Btinternet has changed since 21st Nov and it no longer works on the ipad. Can anyone help please?

    Can anyone help please, btinternet have changed their servers on e mail since 21st Nov and I can no longer send or receive e mails. BT say set to the following but I cannot get it to work, any suggestions please.
    Go to your iPhone/iPad home screen and tap Settings.
    Scroll down to Mail, Contacts, Calendars.
    Tap Add Account.
    Scroll down and tap Other.
    Tap Add Mail Account.
    Put the name you want people to see when they get mail from you in the Name field.
    Enter your BT Business username in the Address field. For example, [email protected] or, where you have registered a custom domain, [email protected]
    Enter your BT Business password in the Password field.
    In the Description field enter the name you want to use to identify the account.
    Tap Next. If you get an error message at this point, tap OK.
    Make sure that POP is selected at the top of the screen.
    In the Incoming Mail Server section, change the Host Name to pop.outlook.com.
    Scroll down to the Outgoing Mail Server section and change the Host Name to smtp.outlook.com.
    Tap Save.

    Hello Kitty Galore,
    It sounds like your your photos that you take on your phone are not showing in your iPad Photo Stream.
    I would check both devices to make sure that they both have Photo Stream turned on in the iCloud settings.
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/HT4486
    How do I turn on My Photo Stream?
    After your devices are up-to-date and you have set up your iCloud account, it’s easy to turn on My Photo Stream on any of your devices:
    iOS devices: Go to Settings > iCloud > Photos (Photo Stream in iOS 6), then turn on My Photo Stream.
    Mac: Go to System Preferences > iCloud, then select the checkbox for Photo Stream. Click the Options button and verify that the My Photo Stream checkbox is selected. Open the application you want to use with Photo Stream (iPhoto or Aperture) and confirm that My Photo Stream is turned on in that application. You can also adjust your my Photo Stream settings in iPhoto or Aperture Preferences.
    If it is enabled, then I would check to make sure Automatic Upload is enabled with this article:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    I imported photos to iPhoto or Aperture from my camera, but I do not see them uploaded to the My Photo Stream album, though the service is enabled.
    In iPhoto or Aperture, navigate to Preferences > Photo Stream. Ensure that Automatic Upload is enabled under My Photo Stream and that you have an active Wi-Fi or Ethernet connection.
    If Automatic Upload is not enabled, you can either enable it and import again, or manually add the newly imported photos to My Photo Stream in iPhoto or Aperture by dragging them into the My Photo Stream album in your Library.
    Cheers,
    Sterling

  • I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.

    I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
    Thankyou

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • How can I edit my website from another computer? and how can I create a new website next to the one, I have already? Can anyone help, please?

    How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?

    Move the domain.sites file from one computer to the other.
    The file is located under User/Library/Application Support/iWeb/domain.sites.  Move this file to the same location on the other computer and double click and iWeb will open it.  Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
    Just create a new site on the same domain file and it will appear below the other site.  If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side.

  • HT1329 Hi All - My hard drive failed and I am trying to move all my music from my ipod to the new hard drive. I am operating on Win 7 64 bit. Can anyone help please?

    Hi All,
    My hard drive crashed and is no longer usable. I just installed a new drive however, I am not finding any way to export my recorded CD's from the Ipod touch to the new hard drive. Can anyone help please? I thought by enabling syc with Ipod woudl do it but to no avail.
    Thanks

    I used a 3rd party program called copytrans http://www.copytrans.net/ that is not free to move my library from my ipod to my itunes library when I had to start from scratch.  After that happened I started backing up my music that purchased from the itunes store to a dvd so I would always have it if things went south.  Now I always backup my purchased digital music to an optical disc just in case plus everythng else I have is on retail cd's so I can just rebuild my library from scratch again if I have to.  You should also regularly back up your itunes media folder to another disc so your entire library will be backed up just in case you should lose your program drive.

  • TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

    When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

    I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work.  i can't find an automatic update of time zones on my itouch to turn this off.

  • HT4059 Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? Mr Ignorant

    Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? I need to persuade someone that this really is worthwhile. Mr Ignorant.

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • HT2486 I am sending an email to a group which I have created in my contacts.  I would like to hide the list of people's emails but cannot see how I can do that.  Can anyone help please?

    I am trying to send an email to a group which I have created in my contacts.  I would like to hide the list of email addresses but cannot see how to do this.  Can anyone help please?

    Thank you for your message.  
    I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

Maybe you are looking for

  • 2009 MBP: freezing and wifi issues

    My mid-2009 Macbook Pro (A1286) has been acting flaky. Sometimes the wifi gets turned off when I close it, and I can't turn it back on even in the Network control panel--only restarting it  turns it back on. Also I've been getting frequent hard freez

  • Unable to find Prefix Rule In CCMP portal

    Hi all, I am using Cisco CCMP portal version 10. I follow User Guide for Cisco Unified Contact Center Management Portal version 10 for add prefix rule to move remote resources to a specific folder based on a naming convention. But I can not find this

  • There is no sound in my ipad help please?

    There is no sound in my ipad

  • Disable a service from a predefined role of a business package

    Hi, I want to disable few services from the a predefined role of material planner .Can  anyone suggest how to disable few services from the user

  • How do you create a structured numbering system in mac "pages".

    I used to use microsoft word, but said id give "pages" a go. what im looking to do is to create a structured report, with the headings in the following manner e.g. 1.0      1.1      1.2      1.3           1.3.1           1.3.2           1.3.3      1.