I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?
I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?
Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.
Similar Messages
-
I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name. -
If someone phones my mobile number, they are prompted to leave a 10-second message which them comes to me as a text. I want real voicemail with real voices but I don't know how to set it up on my iPhone4S. Can someone help please?
Ask your wireless provider. None of what you describe has to do with the phone itself.
-
Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?
Whinston,
I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies? -
Hi.I need help.my iphone was Stolen .how can I get back my iphone. Serial No.DX******PMW.could you help me find my iphone.thank you very much.could you send me the ICCID number to help me find the iphone.if you can help me.
<Personal Information Edited by Host>
Sincerely a Chinese girl really need your helpSorry we are all users on this User Community No Apple Staff
Read this .
http://support.apple.com/kb/HT2526
Apple do not and cannot assist in finding stolen property ,that is the responsility of your Police -
I can't see right my mails. I have to double-click in my mail for reading it. Otherwise, the only think I can see, is the list of my mails. Could you help me please?
Go to the right side of the list view and place your cursor over the edge until it turns into a double arrow, then click and drag to the left.
If using the Classic layout, go to the bottom of the screen and after getting the double arrow, click and drag up. -
My computer says I need a driver for my iPhone4s but I don't now how to get a driver plz help
I need help my computer says I need a driver for my iPhone 4s but I don't know how to get a driver for my iPhone plz help
Remove/delete itunes and reinstall it.
-
ADDING A MacBookPro to a vista network
printer sharing with MacBookPro & Vista
ADDING A MacBookPro to a vista network
Options
08-25-2014 01:13 AM
I have an HP model Pavilion a6528p tower PC, a Belkin F6D4230-4 wireless router,
My Brother HL2140-XML laser printer is connected via
USB cable to my HP tower PC
My operating system is Windows Vista Home Premium. My
ISP is Time Warner Cable.
My wife's laptop is an Apple MacBook Pro and currently accesses the internet via the Belkin wireless router.
NOW,
I want to set up the MacBookPro to send documents wirelessly and print them on the laser printer.
All of the other threads I found deal with Windows PC's but I have one PC and one Mac.
I need instructions on how to set up the Apple MacBookPro.
Thanks.Hey patriot80,
Thanks for the question. I understand that you wish to setup Printer sharing with your iMac and your Wife’s MacBook Pro. The following resource may provide a solution:
OS X Mountain Lion: Share your printer
http://support.apple.com/kb/PH11450
Thanks,
Matt M. -
I don't know how to set AE to extend my network.
Today i bought a new Airport express, and decide to use it as a extend tool for my network.
but i found i cannot set it up!
i set it as a extended, then, it disappeared from the list!
Then what i can only do is to reset it, and do everything again, but it disappeared again
Because i'm living in my friend's house, so that i cannot remove the old router.
How to deal with it?
P.S: If i only set it as a router,it's okay. but i cannot do that.
Is anyone can tell me how to set it?
Message was edited by: AcediaAcedia, Welcome to the discussion area!
If you configure the AirPort Express (AX) to extend the network, the only network name you will see in the list of networks is the name of the network which the AX is extending. -
I have a iMac 6,1 that I need to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . How do I reformat ?
Boot the ssystem from the OS DVD. Once it is booted run Disk Utiltiy. Select OS Extrended (Journled)
See http://support.apple.com/kb/HT3910?viewlocale=en_US&locale=en_US -
I have an ipad which is four months and three weeks old nearly. I have a message on it telling me that my macbook has been found. I only have to press
ok for it to go away.
I press it and it wont go away, I try to turn off my ipad and cannot do so why is this? and can you instruct me how to get rid of it and get the machine to turn on ples.
Sis. MavisYou should also ask this in the iPad forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/ipad/using_ipad -
I've tried my hardest to figure out why I can't buy my stupid book for school, and I cannot change my privacy settings because I don't have a recovery email, and every time I press 'set my recovery email' it takes me back tithe same page, logs me in, and then I don't know where to go. And don't tell me it's in 'Password and Settings' because I have been there done that. Please help...
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551
-
Is any way that I can tranfer and updetes all my apps in to my computer and devices? Also I would like to delite completly the old email address so I could update all my devices and computer please?
1) Create a new CSS document and save as mylinks.css. Paste the following code in Code View:
/* CSS Document */
/**link styles**/
a:link {color: red; text-decoration: none;}
a:visited {color: silver; text-decoration: none;}
a:hover {color: yellow; text-decoration: underline;}
a:active, a:focus {color: green}
2) Create a new HTML document and save as links.html. Paste this code in Code View between the <body> and </body> tags:
<ul>
<li><a href="somelink.html">Item 1</a></li>
<li><a href="somelink.html">Item 2</a></li>
<li><a href="somelink.html">Item 3</a></li>
<li><a href="somelink.html">Item 4</a></li>
</ul>
3) Link a stylesheet to your HTML document: In the CSS Properties Pane you will see a little link icon to attach a stylesheet.
Within your HTML page you should see a link to your stylesheet between the <head> and </head> tags.
<link href="mylinks.css" rel="stylesheet" type="text/css" media="all" />
Did this help?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
I received a 15 £ itunes gift card by mail and I can't redeem it because I have no code. What should I do? Please help!
The code is under the scratchoff area on the back side of the card. Note that an iTunes card sold in the UK will only be valid in the UK, so if you live in another country, you will not be able to use that card.
Regards. -
I have tried 3 cards already but still the same problem with app store Your payment method is not valid in this Store. Please enter a new payment method.
Is there any ways to solve the issue?
Thank you in advance for your help!If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?
-
Creation of DB Adaptert for calling stored procedure in MS SQL server
Hi, I need to create a DB adapter to call a stored procedure in MS SQL Server. I have gone thru the thread MS SQL Server database connection It mentions that we need to use a command line utility for generating the wsdl and xsd for calling stored pro
-
From which table the structure field is getting populated
Hi all, I've a requirement to run the report for process orders when AFVGD-FLG_PURS(Indicator:purchase order exist)is active. I'm not able to find from which transparent table I can populate data in this flag value. I've tried "where-used list" to g
-
Can I configure a Raid 5 disc through my mac
I'm planning to buy a NAS and wanted to configure RAID 5. Does OS X have a built in configurator application?
-
Wireless Security & Authentication methods
Hi, I've some experience on WLAN Networks, but I would like to have your opinion around Wireless Security implemenations. We have several sites where we have some Cisco Access points running IOS. We are currently doing WEP 128b, with Mac-Authenticati